Guys this is by far the best video series on KZitem, especially for a newbie like myself. I’ve watched every swap video there is. I finally feel like I understand enough to get started. Can’t wait to make my 88 Camaro fly!! It’s a stock 2.8L V6 👎
@2carpros
6 ай бұрын
Happy to help! That's going to be a sweet build!
@kailuagarage
Жыл бұрын
A nice option is a four or five terminal bus bar that you could mount to the firewall, and then connect all those power wires there and a single wire down to the starter, rather than so many terminals connected to the starter lug.
@2carpros
Жыл бұрын
Very true! Thanks for watching!
@DE-ok4ld
Жыл бұрын
Very good point!
@keys2.0
Жыл бұрын
Best explanation of ls wiring I've seen, hands down. Much appreciated
@2carpros
Жыл бұрын
Wow, thanks!
@ratsrodsgarage461
9 ай бұрын
Awesome video. I got one huge tip. Flat ground straps love to corrode and make huge headaches. Easy quick fix is to put shrink wrap over them to block the environment that loves to corrode them. I seen that problem way to many times to count. Some chevys have a factory strap that is on the driver side rear of block and connects to bottom firewall area. 9x out of 10 when they have a electric problem you go under and look you will see it is nice and green and crumbling apart. That is do to not being covered.
@MaliqThalier
9 ай бұрын
Great video thanks, so many ls swap how-tos will say “now wire up your swap”. This made it a lot less intimidating especially thinking of it as two separate vehicles.
@2carpros
9 ай бұрын
Right! That's why I wanted to show the fine details. I'm so glad it helped! Thanks for watching!
@Josh-jy9rj
4 ай бұрын
Have saved, bookmarked and watched this as I am planning a 5.3 swap for my baby(see my ava). Thanks for the video, it will certainly come in handy
@conspiracy_0011
6 ай бұрын
Look at me I am the bendy man now😂 just came to see how to wire up my starter after hooking up my wiring harness yesterday and had to plug in the crank sensor with the starter already on it
@sauce1rr
Жыл бұрын
Best vide I’ve seen yet
@Chewie374
4 ай бұрын
You explain it so easy. Thanks
@alirezashirazifard8990
Жыл бұрын
You did a good job explaining the whole wiring. Thanks
@2carpros
Жыл бұрын
Awesome! Thanks for watching!
@frankjope5572
9 ай бұрын
Good video. Thanks for posting.
@madrabbit9007
Жыл бұрын
Very educational! So glad you did this.
@2carpros
Жыл бұрын
I'm so glad you enjoyed it! Thanks for watching!
@72NovaLS-SP
6 ай бұрын
Great video, you made look easy. Thanks
@2carpros
6 ай бұрын
Thanks for watching!
@joshuagarvey9362
7 ай бұрын
Great video
@scottc0510
Жыл бұрын
EXCELLENT, well-detailed video, but I have a little constructive criticism: All those colored plastic crimp connectors are unsightly. A much better option asthetically is to use "naked" butt connectors and ring terminals with heat shrink tubing. I know it's more labor intensive, but makes your engine and engine compartment look MUCH better (more professional)... With so much effort to do your wiring "right," a little extra work to use naked connectors with heatshrink would be WELL worth it.. :-)
@2carpros
Жыл бұрын
Great tip! I use connectors with heat shrink built right in now. They look very nice. Thanks so much for watching Scott!
@mitchellschlaikier6274
Жыл бұрын
I just bridged ignition in the on position and cranking 12v together from back of the keyed ignition for ecu power up. Saves having a switch that you have to find every time.
@dennisoechsle2410
3 ай бұрын
Yep, 55 has a post on the ign switch for cranking position for thos that do mot know. Its also how to wire a msd as well. Luke you said just junction the purple and green wires from.switch and its good to go.
@jamesgatlin3711
9 ай бұрын
Love this video that's a lot
@DE-ok4ld
Жыл бұрын
Thank you for the informative video!
@2carpros
Жыл бұрын
Glad it was helpful!
@hectormontano6957
6 ай бұрын
Great video ,I feel more comfortable attempting my 1st ls swap , my question is do I still need to use or have original fuse box.
@2carpros
6 ай бұрын
Nice! You can use that or you can fuse the circuits individually like I did. There isn't that many so it's not so bad. Thanks for watching!
@traciespivey1687
7 ай бұрын
I see your still running the factory chassis fuse box you have any issues now your running a modern electronic fuel injection engine I have a 56 bel air im about to swap
@manueljohnson6301
2 ай бұрын
You should do turbo mounting scenarios on ls swap
@2carpros
2 ай бұрын
All in due time! Thanks for watching!
@Noahrangel
Жыл бұрын
I love the stealing vin part 😂
@2carpros
Жыл бұрын
Hey don't do that! *wags finger* lol Thanks for watching!
@gmt400_k2xx
Жыл бұрын
Cut off wheel works great for cutting heavy cables
@2carpros
Жыл бұрын
Yes it does!
@stevepope5484
3 ай бұрын
Id have to invent a splice/termination else where with one red wire to the starter
@pyrogaminghound9579
Жыл бұрын
I'm trying a project build with this info, gen 5 mustang and 2018 bmw diesel engine rwd car, making a fuel efficient diesel lol
@CJ2Fye7
Жыл бұрын
Other is a 58 tooth reluctor wheel. 24 or 58
@manueljohnson6301
2 ай бұрын
Now my 1984 ss monte carlo i call harry crumb will live
@2carpros
2 ай бұрын
Love that! Is that an Ah Real Monsters reference?
@HartsuffMotors
Жыл бұрын
That issue with wiring up the ECU power is the biggest reason we see for no starts on LS swaps. I threw up a video about how to solve this issue if anyone wants to see the fix.
@2carpros
Жыл бұрын
It really is. Thanks for watching!
@PaulMiltier
Ай бұрын
@@2carpros11:22 11:22
@stevepope5484
3 ай бұрын
Wow! I googled it! How to find description!!! Man?
@2carpros
3 ай бұрын
Click "see more" under the video. Thanks for watching!
@basemandog
7 ай бұрын
I am STRUGGLING with wiring up my 82 GMC. It used to be a diesel now it has a 6.0 LS. I have no hot power wire when the key is in “Accessory” position
@2carpros
7 ай бұрын
So just do exactly what I did and have a switch for the ECM. Thanks for watching!
@75zl1
Жыл бұрын
Just some feedback on that ground from the engine mount to the frame, that's not a very good ground--most of those connections from that mount to the frame have paint, but otherwise good job! Good explanations!
@2carpros
Жыл бұрын
Technically correct. But I did a continuity test and it read fine. Thanks for watching Jared!
@75zl1
Жыл бұрын
@@2carpros awesome! That's all that matters!
@ryanmacewen511
Жыл бұрын
For ECM hot when cranking, hot when starting.. Can't you just use ignition power from ign switch/ Maybe add a relay if you are concerned about power draw?
@2carpros
Жыл бұрын
If your ign switch works that way. This one doesn't work that way. It turns all power off to the car except the starter. Then when released it cuts power to the starter and powers the rest of the car. Thanks for watching Ryan!
@nerogudani6731
Жыл бұрын
wanna sonvert 2008 chevrolet captiva z24 from dbw to dbc what do i need
@NavidShirazi-b5b
Ай бұрын
How much do you think the 0-60 gon be with just the stock ls3? On 2nd gen camaro
@DennisTM1
Жыл бұрын
Talk about thoroughly explaining what you need to know & not talking about why your video took 3 months since the last one, since your puppy rex died … street sweeper. Thank you, Liked & Subscribed.
@2carpros
Жыл бұрын
Awesome! Thanks for watching!
@JaanZada-v8q
Жыл бұрын
good👍
@2carpros
Жыл бұрын
Thank you! Cheers!
@georgenettlesjr1466
9 ай бұрын
Where did you get that transmission cross member?
@2carpros
9 ай бұрын
www.summitracing.com/parts/CLP-CP90044 In my big playlist kzitem.info/door/PLe3kz1i_LrtVvW1Avm2r48HutlXZtDC5m Thanks for watching!
@franciscolara8359
10 ай бұрын
You guys know, if I can I put a 2011 5.3 Silverado harness in a 2008 tahoe 5.3 block and transmission with a 4L60E?
@2carpros
10 ай бұрын
I don't want to say yes and there be some small connector that is different and waste your time. My guess is yes but I have never done it and not a 100 percent that you could. Thanks for watching!
@stevepope5484
11 ай бұрын
Map Left /right,
@brandonmello2077
Жыл бұрын
Did you have any issues with the O2 sensors with this harness?
@2carpros
Жыл бұрын
No not at all, everything fit together and works great. Thanks for watching!
@jamesgatlin3711
9 ай бұрын
Can anyone tell me about how much will this ket cost me?
@2carpros
9 ай бұрын
I think that harness was 580. Link in the description! Thanks for watching!
@jamesgatlin3711
9 ай бұрын
Ok so about 1000 for everything? And thanks for the video it made it simple like a kid could do job great video the best I have seen
@keeper0523
Жыл бұрын
Do not panic! It’s a video over an hour long about wiring. Why panic?
@2carpros
Жыл бұрын
True! Nothing to worry about. Thanks for watching!
@keeper0523
Жыл бұрын
@@2carpros oh no! I can’t handle the passive aggressiveness.
@2carpros
Жыл бұрын
@@keeper0523 I'm not at all.
@Marc_Wolfe
Жыл бұрын
54:04 Replacing that starter will be a bitch.
@2carpros
Жыл бұрын
I've already taken it off and on a few times now. Not bad at all. Thanks for watching!
@Marc_Wolfe
Жыл бұрын
I guess your next reply ought to be "thanks for pressing don't recommend channel"... poser.
@Marc_Wolfe
Жыл бұрын
As if wires aren't cool and need to be hidden. Are you embarrassed to have something better than a carb?
@2carpros
Жыл бұрын
Because that's the way I wanted it. It's just a personal preference. Thanks for watching!
@bford1646
Ай бұрын
hard to watch a millennial talk mods......
@2carpros
Ай бұрын
How old do you think I am?
@travisverhagen5312
7 ай бұрын
This guy acts like someone that walks through the mall is doing this. We know motors dude. No need to sugar coat it
@outsidethelines2162
7 ай бұрын
There is so many people that don’t understand it, including me. I’d rather him explain it to me than assume I know what’s going on. It’s a big yikes little bro that you don’t get that. Praying for you my man.
@KP9001
6 ай бұрын
You act like only people who know motors watch this video. Step off and go know your motors somewhere else. I gotta start somewhere and this dude is a great help for me.
@paulrosborough8618
Жыл бұрын
Man you talk too much can you post to be sure how to wire the car
@2carpros
Жыл бұрын
Hmmm if only you can scrub through the timeline to find the info you want. Alas such tech is beyond our reach! Thanks for watching!
@javierargumedo3
2 ай бұрын
what episode # shows how to wire SAFETY NEUTRAL SWITCH FOR AUTOMATIC TRANSMISSION 4L60E?
@2carpros
2 ай бұрын
I think that was in 10. Thanks for watching!
@raystrong8951
6 ай бұрын
You could've connected it to the radio power source
@jeromebradley6860
6 ай бұрын
Thanks!
@2carpros
6 ай бұрын
Wow thank you!
@stevepope5484
3 ай бұрын
How do i find the Link in the Description?
@2carpros
3 ай бұрын
Click "more" on the textbox under the video. Thanks for watching!
@darryl3767
Жыл бұрын
I have a ls swap 5.3. I’m ecu isn’t getting constant 12v power. It ranges from 10/9/11. Any ideas of why it would lose power? Can’t find any bad grounds or bad wires. Pulling my hair out.
@2carpros
Жыл бұрын
Hmmmm that's super strange. I would try a different battery. Seems like a cell inside the battery is not happy. Thanks for watching!
Пікірлер: 97