This is my 2nd Keurig coffee maker of this model. kzitem.infoUgkxBrV-RbF5Nk0Rlt9i15aao-YMzqzTG8Vf The first worked fine for more than 2 years, and I could still get a decent cup of coffee out of it if I fiddled with it when I decided to replace it. The problem I had with my first unit was this: When attempting to brew a cup of coffee, the unit would either keep brewing until the coffee was undrinkable or it would not run long enough and the coffee produced was way too strong. I cleaned the unit as best I could but it did not help. So in the end it was just too much trouble to get a good cup of coffee out of it, so I decided to replace it with a new one, which has been working great since I unpacked it.
@stuartevans8364
6 жыл бұрын
Thanks guys, you just enabled me to successfully repair my coffee machine, in Wales UK :-)
@lucgaudreault7257
2 жыл бұрын
Bought my refurbished Magnifica from you 5 years ago, no issue until this week when the infuser got stuck in the down position. Will need new outings, but it is still better than another machine. Thank you!
@moonshotsilver
2 жыл бұрын
I discovered my infuser 2 years and 6 months after using my machine every day. I actually dreamt my coffee machine was going to make me really sick with mold last night. So unlike most dreams I remembered this one and set about looking into what I've been missing on previous cleans. Yeah it was rank in there and no doubt it would have made me sick. Thank you to my gaurdian angel for looking out for me. Some how it doesn't need a lube yet but I'll be watching out for this when I clean the infuser on the 1st of every single month. Enjoy your coffee 🙏
@jayseb
3 жыл бұрын
Thanks for that! After 5 years of usage and more than 7000 coffees, I hadn't opened the infuser. Let's just say that it didn't "Just come out", but I did manage with a decent pull and screwdriver. Once everything was removed I used mineral oil as I didn't have any food lubricant. Popped back into the unit after a good self-service and the machine works like new. My Perfecta has been working non-stop and now at 7015 coffees, still works great.
@kiko9107
7 жыл бұрын
THANK YOU VERY MUCH!! my infuser was stuck and when I pulled it the inner part got separated from the infuser body and I couldn't fit it in because the clip was already in the infuser, but thanks to this video I re-assembled it correctly and now the machine is working again! Thanks again!
@GDay_InPrint
4 жыл бұрын
Thanks guys. Excellent demo, really helpful, you just saved another coffee machine.
@chrisst.9500
5 жыл бұрын
Fixed my coffeemaker problem. Thank you.
@maleka58
6 жыл бұрын
Thanks, guys that was a really easy to follow video and just a clean and some food grade lube did the job :) x
@geral1187
3 жыл бұрын
Thank you guys. That advice for mantainance, worked like a glove, for my expresso, DeLonghi. 👍best regards, from Portugal.
@Chardonbois
6 жыл бұрын
Great tutorial guys- many thanks for sharing!
@Killadog1980
2 жыл бұрын
It's about time I order something to fix it. Thanks for the informative video!
@UTubesNameIsAShit
Жыл бұрын
Hey guys, your advice on cleaning the brew unit came just handy for my 14-year-old ESAM 4200. I bought it in 2009 and never(!) disassembled. I don't know exactly how many coffee cups it made without cleaning, but it seems like 3 cups/day * 330 days/year * 14 years = 13860. God bless DeLonghi' engineers :) And of course thank you very much for this useful advice
@user-vi1jz9bl5e
6 ай бұрын
Me likewise, now after 14 year I considered it to be a bit stiff. So I looked up ` "how to grease..". Yep, the delonghi is great! Maybe once a month is a bit over the top?
@tinawainscott2089
3 жыл бұрын
Another thank you! I did have to gently pry off that first clip with a screwdriver and it took some noodling to get the second part out, but otherwise it was easy :) Putting it back together, not so much. Non-pro tip: push the piston in until you hear/feel a click. It felt solid in there to me, but it wasn't. Then pull the piston out just a bit before putting on the clip, or it won't snap in. The piston fell out when the machine was turning on and got stuck. I thought I'd broken the machine!!! Finally got it figured out and was so happy to get this particular cup of coffee. :)
@wranglers2
2 жыл бұрын
Exactly. Not as easy as they make it out to be. I think they've practiced it several times before filming.
@huzcer
2 жыл бұрын
The key points are that the clip rests just above the three black tabs on the tube (over each side and one in middle) and that the gripping parts of the clip are towards the bottom
@grahamgregg3006
4 жыл бұрын
Brilliant. So easy when you know how👍🏻
@DerekGralewski
Жыл бұрын
Thanks guys, your video really helped and made this very easy
@jivewire
2 жыл бұрын
Thanks. One note: Sometimes the black inner sleeve stays stuck when you pull the bottom out after removing the clip. If that happens, put the piece back in, thenuse a flathead screwdriver to get under the 3 black prongs to wiggle it loose, then pull again.
@dentedmosquito
4 жыл бұрын
Thank you for your excellent video!
@joeyshore3566
6 жыл бұрын
Hi do you have a video for lubricating the infused for a Magnifica S? Or some instructions on taking it apart as in this video. Thanks
@CoajaCristiandance
3 жыл бұрын
Thanks guys
@sergeyboroda6020
3 жыл бұрын
Thanks for explaining
@bradster1708
6 жыл бұрын
I have a Delonghi Magnifica 23.460s machine. The brew unit on this is different. I can’t work out how to disassemble for cleaning. Is there a video around for his type of machine?
@andreiastrachinonieto6585
5 жыл бұрын
I’ve follow your tutorial but I must have done something wrong, that when I insert the infuser to my esam5600 the middle part got separated and now everything is stuck inside and my machine on general alarm!!!! Please help me! How can I solve it?
@asyatorovina2664
Жыл бұрын
Thank you!
@SeksDobryWszystkim
3 жыл бұрын
THIS HAS BEEN BY FAR THE MOST USEFUL AND WONDERFUL VIDEO I HAVE HAD A CHANCE TO WATCH! :D I used silicone sex lube, it's food safe :D My wonderful Magnifica does not spill coffee allover anymore! Thank you!
@mikolajczakfamily3479
4 жыл бұрын
Thanks chaps had mine for 6 years and first I realised that this bit came apart :-s
@georgeoV911
Жыл бұрын
Hi so I watched your instructions video, with a delonghi ecam 23.460, little bit different brewing unit than this one...any my problem is, that the dumping mechanism ( the plastic arm with a spring under it ) on the brewing unit, does not fit closely, so there is a gap, and when the brewing finishes, the coffe pallet does not go down the waste basket so smoothly, so everytime the filter on the brewing unit might still have some coffe residue. Do you think replacing the spring for the dumping arm will help ? Please help thank you.
@MrRickytuk
Жыл бұрын
I've noticed that the entry level Delongie bean to cup machines has the same brew unit as models at twice the price. The difference is more in the user interface and additional automation of milk foaming. Is there anything about the more expensive machines that would help them brew better espresso?
@catalinbusiness
3 жыл бұрын
Thank you so much :) !
@deborahsaari6207
2 жыл бұрын
Your videos are very helpful and informative. I have a Delonghi Magnifica and have repaired it twice thanks to your instructions. Can I use a synthetic food grade lubricant or does it have to be Silicone? I purchased a tube of Stera-Sheen Heavy Duty High performance lubricant and thought it was silicone. It does have a temp rating -20F - 350F. Any help is appreciated.
@TathagatNLN
7 жыл бұрын
Thank you so much :).
@SeattleCoffeeGear
7 жыл бұрын
You are very welcome!
@craigflitcroft2508
Жыл бұрын
Very helpful vid. Mine is the Autentica model and has a different brew head. No clip to dismantle the unit. Can you shed some light on the strip down please 🙏🏻
@johntomaino3456
Жыл бұрын
thank you
@jezwillett3321
2 жыл бұрын
Hi I have a Caffe Corso and clean my brew unit every week or so by soaking for 15 minutes and pushing back and forth. After watching this however I decided to take it apart and fully clean it but I ran into a problem as when the clip was removed the slider did not come out, it would move the piston up and down as if the clip was still there. Is there a reason that it could get stuck and is there a remedy? Thank you Jez
@andyg4943
7 жыл бұрын
Thanks very much. You saved me £300 as L was having to buy a new one as the store I bought it from said it is beyond repair!!
@s.winter824
2 жыл бұрын
They sound like retail pirates. Try buying at a coffee machine specialist who also services machines - they know about routine maintenace.
@David.Horne72
7 жыл бұрын
guys my brew unit does not have this clip, do I need to use a screwdriver and undo the unit
@AndreFamily7
6 жыл бұрын
where is the best delonghi repair place if you dont do it ? I think the place near me in Dallas, is so expensive they dont want to do repairs, they just want you to buy a horribly costly one from them ... Any suggestions ? i like this video , enabled me to clean and change O rings well .
@psyfusion
Жыл бұрын
So simple
@cennis5003
7 жыл бұрын
Whats the part number of those gaskets?
@jorgenavarrojr2183
4 жыл бұрын
Is that lubricant same as food grade silicon grease?
@mikeclinch1141
4 жыл бұрын
How about an equivalent for the new style diffuser?
@FamAdventures
4 жыл бұрын
Hi-My DeLonghi is an ESAM3300, and for some reason, after taking the clip off, the black part does not come out - it seems to be a different design. Any ideas of how to remove this so that I can clean and grease the inside? Thanks.
@davidbackhouse4824
3 жыл бұрын
I thought the same (ESAM5400), but it was simply very very tight, and with some gentle prising eventually came away.
@bristolfashion4421
2 ай бұрын
no it is not it is just like the other ones what you have to is keep at it innit oh yes
@suzanwood868
4 жыл бұрын
How do I get it out of the machine. There's been some sort of problem that happened in between turning the machine off and then on the next day and it is jammed in place.
@GM-jt3sh
3 жыл бұрын
Is th=is the same for a Magnifica S unit?
@raytalley1
Жыл бұрын
I am having a hard time putting the horseshoe clip back on...any suggestion
@noelgarry7199
4 ай бұрын
Hi. I followed your instructions. I was able to take off the clip but am unable to pull out the black part. It appears to be stuck. Have you come across this before? I am afraid to force it with a screwdriver.
@WhiteRapunzel
2 жыл бұрын
Very useful thankyou. Couldn't find much useful infro from dehlongi themselves. It just said soak!
@OnTVaustralia
7 жыл бұрын
hi, is there a good way to clean the milk scum buildup in the frother?
@maleka58
6 жыл бұрын
I clean mine by putting the frother into clean hot water. The pull plastic cover off and clean
@pohaa
3 жыл бұрын
Hi, thanks for this video. My machine seems to be building up a lot of grounds not in the puck catcher, but through the various assembly parts, clogging things up. Is there a standard service I need to perform.. I can't identify why it's scattering grounds in odd places
@marylento7372
2 жыл бұрын
Hi did you ever find out what was happening? My machine is doing the same thing. Thank you.
@AveryLevitt
2 жыл бұрын
@@marylento7372 Did you? I have the same issue haha. Going to try this cleaning/servicing first once I receive my food grade lube in the mail.
@s.winter824
2 жыл бұрын
A barista friend told me that was happening in my machine because the grind was too course. Changed the settings (while the grinder is running) to a finer grind. All been good after that
@katenieh6485
Жыл бұрын
I had the same issue. Tried this cleaning and all fixed! I was in tears for !!🎉🎉
@tinatyson8026
Жыл бұрын
Is it plastic made too just like the mini ?
@michaelbattista1334
Жыл бұрын
Where do you replacement gaskets for that exact machine?
@alekzzisrec
8 жыл бұрын
nice, where I can find some grinder settings for delonghi ??
@maleka58
6 жыл бұрын
It is inside where you fill the coffee beans. If you adjust it make sure it is grinding beans at the time or may damage the grinder. There is a small wheel in there that can be turned. I now have mine of the lowest setting as it creates more crema.
@husamad9824
3 жыл бұрын
@@maleka58 is it a big deal if I adjusted the grinder without being on for once or twice?
@rfw700
3 жыл бұрын
Thanks for posting that. You’ve probably saved me from having to buy a new machine.
@MrJericho07
6 жыл бұрын
They sell the o rings(4) with lubricant on amazon for £8
@morganzipp1
5 ай бұрын
Can you tell me where to get these O-rings and possible a new infuser? I may need at least the O-rings. I have searched the web with my Model Number of my TrewBrew CAM51025MB and nothing comes up for either. The O-rings I find are all general or go for different De Longhis and no infuser I have found looks like mine ( the one you guys are working on) I have my unit almost a year and it is definitely having problems. I hoping a good cleaning will help but may need more than that. BTW nothing on the maintenance part in the manual states about doing this to the infuser. Very disappointing and I am hoping it is not totally destroyed. I thank you in advance.
@SeattleCoffeeGear
5 ай бұрын
Hello, Unfortunately I'm not positive whether or not the brew unit in the model you have matches what is shown in the video, as the video uses an older brew unit. I believe that the newer DeLonghis have some updates to the design. Unfortunately your best bet is to reach our to DeLonghi directly as they are the most likely to have the parts you need and can give you the best advice.
@blcglois
4 жыл бұрын
Any suggestions on getting the last piece out? Wish this easy maintenance job was part of the manual! If it does not come out, is it too late?
@blcglois
4 жыл бұрын
I Finally got it apart! O rings were broken and dried out. Took it apart, replace the O rings and lubricated. All Good now!! Thank you!!!! Too bad this information is not in the manual as required maintenance! Maybe this machine would not be my second one.
@Zoneofgolf
4 жыл бұрын
@@blcglois Hi, how did you finally get it apart? I'm still struggling. Cheers
@blcglois
4 жыл бұрын
@@Zoneofgolf I soaked it in very hot water and when the water cooled I added more hot water and tried again. Coffee oils were very built up.
@khalilsamir4082
3 жыл бұрын
the cofee touch the lubrifiant product !!!!
@louiselashlie747
8 жыл бұрын
My magnifica isn't depositing the grinds into the tub. When I open the front there are grinds all over the place especially in the groove to the right of the brew unit. Any ideas to help?
@Brian-bf1kn
6 жыл бұрын
Your infuser is too tight to move, you need to watch the video again and do what they recommend
@maleka58
6 жыл бұрын
I had that problem and followed this video and it is now working well and not making a mess anymore
@britishteapower
3 жыл бұрын
The grounds puck isn't landing in the basket, it's falling out into machine and staying on the part with the screw. any ideas? I haven't lubed it yet..any other parts i need to lube?
@marylento7372
2 жыл бұрын
Hi any luck? my machine is doing the same thing. Thanks.
@muhammadahsen9465
2 жыл бұрын
What's the size of O ring?
@hikerboater
7 жыл бұрын
How often is this recommended?
@maleka58
6 жыл бұрын
once every 1 or 2 months
@rezaxxx
7 жыл бұрын
Great video. Is it really needed once a month? I thought its more like a year or so. I do drink allot (like 7-8 cops a day) so i should do it once a month right?
@Oscar-if6lq
4 жыл бұрын
This is very late but I thought this response might help someone else with the same question... This video is a thorough teardown and cleanup, this might be something you do every year (or even less frequently), or in the case the brew unit has been neglected and become jammed. Delonghi's official infuser cleaning videos just involve soaking it in water (no soap/detergent!!!) for 5 minutes followed by rinsing it under running water. This is what I imagine they recommend doing every month.
@mendoccino
8 жыл бұрын
So, what type of grease do you use? Silicone based or mineral oil based?
@SeattleCoffeeGear
8 жыл бұрын
This stuff right here: www.seattlecoffeegear.com/saeco-brew-unit-lubricant ;D
@maleka58
6 жыл бұрын
Silicone food grade. I bought some on Amazon
@SeattleCoffeeGear
8 жыл бұрын
New Videos Every Day! Subscribe ▸ goo.gl/hRKEhR Watch All The Tune Up For What Episodes: goo.gl/EFKOwA Visit Us Online: www.seattlecoffeegear.com Thanks for watching all our videos folks! You're the best!
@susiedenning1531
Жыл бұрын
We can't remove the 2nd piece, after taking the clip off. Seem to have the identical unit..
@mickbonner1495
9 ай бұрын
I removed the clip, but the pull the black bit doesn’t come out
@tymom9313
3 жыл бұрын
Why is my lcd screen blank?
@johnmorrison8577
2 жыл бұрын
do not use petroleum based grease (silicone), it dissolves O rings
@ummdahem
7 жыл бұрын
EMPTY CIRCUIT FILL CIRCUIT.. I see this message, then I press the (ok) button, to pouring water out.. After that; I press the button to prepare a cup of coffee .. then the problem back again!! I don't no what i have to do..
@Brian-bf1kn
6 жыл бұрын
Press hot water and run that for 10 secs then it is fixed!
@mariamadalenarodriguesdeal2679
3 жыл бұрын
Essa tradução tá atrapalhando a gente ver a peça ela tem que ficar lá no alto da tela Grata Dona Maria
@kinnikuzero
Жыл бұрын
Bro the ECAM22 isn't that dummy proof it got those gears and a rack on the piston
@ttttt7026
7 жыл бұрын
So you only lube the o-rings?
@maleka58
6 жыл бұрын
No, and the main bit that goes up and down inside. it may still have a little on. feel it.
@Killadog1980
2 жыл бұрын
Mine has survived for 4 years and no lubrication. 😬
@pingshakl
8 жыл бұрын
so, drinking lubricant?
@David.Horne72
7 жыл бұрын
adds flavour :-)
@maleka58
6 жыл бұрын
It has to be silicone food grade. Sold on amazon
@CrashExhibition
2 жыл бұрын
Did this but now it moves a bit too easy…
@wranglers2
2 жыл бұрын
That clip is nearly impossible to get back on. WTF?? Why is it so difficult?
@s.winter824
2 жыл бұрын
1. The clip is upside down? 2. The plastic tube with the spout need to be pushed in further?
@wranglers2
2 жыл бұрын
"smooth", "very smooth", "it should meet no resistance". Really? Even after new rings and new grease, there is still resistance. I don't know what "very smooth" means.
@sanyumattik7593
7 ай бұрын
Are you Kidding ,the lubricate solution it going straight in your first cup of coffe,if you didn t now they are silicone rings just cleaning with simple water , after it wears out they needs changed. Everyone with a Google account can give bad advice ,if you like with the lubricate solution in the coffee Good appetite.
@sport-zy1og
7 ай бұрын
It's food grade grease.
@edwardpaul6423
2 жыл бұрын
Why do you need 2 people to do this video??
@s.winter824
2 жыл бұрын
Keeps 1 more coffee machine repairer off the streets.
@steveshadforth8792
16 күн бұрын
Total bullshit, the screens get blocked and taking them off and cleaning all the holes makes a world of difference. Don’t post videos if you’re talking bollocks.
Пікірлер: 116