The title should be called; I don't really know how to lubricate sliding doors but am going to spray this crap everywhere and hope for the best.
@taradead
5 жыл бұрын
The factory does not leave lubricant on the tracks. More than anything else, you should just be cleaning dirt off the tracks...so you should be wiping them off after spraying them. Same with the rollers, hinges, locks, etc: spray, then wipe off the dirty excess (and so you dont leave petroleum products on the paint).
@Universal.G
5 жыл бұрын
Better grease on the paint than rust under it
@nikups6418
4 жыл бұрын
You are absolutely correct. Spraying the WD40 on a rag and wiping it on is the best method. Leaving it runny like that will collect dirt that will cake up in the track.
@innovativeintelligence4172
2 жыл бұрын
metal on metal never makes sense, I don't care what the factory does.
@stone-rock
Жыл бұрын
"I have no clue what I am doing so I will buy a product everyone else uses ("can't hurt"), then spray it randomly everywhere ("can't hurt" 0:54), then I am going to make a mess 1:13, and there's my youtube contribution!"
@bettyyoung1976
4 жыл бұрын
Please use silicone instead of lithium. Lithium degrades your rubber and gaskets.
@MikeandLisasExcellentAdventure
4 жыл бұрын
True. But I don't think there is any rubber or gaskets on the rollers.
@aussieexpat
3 жыл бұрын
@@MikeandLisasExcellentAdventure Is the roller not plastic? It's definitely not metal...
@aussieexpat
3 жыл бұрын
This is what I thought, lots of videos showing using lithium grease which is for metal on metal applications. The rollers are some kind of polymer... and so are the wires, well at least on mine, the wires are plastic coated.
@stevefifield1207
25 күн бұрын
My owners manual for 2016 T&C says to use white lithium spray for door hinges, pivot points, door rollers, sliding tracks (pg 638). So this product seems likes the right thing.
@5mjc
3 ай бұрын
Your only suppose to spray the inside of the roller wheel.thats all. You will attract more dust and dirt doing your way .
@larrywmayes1561
Жыл бұрын
Why doers this video keep coming up when I look to lubricate my sliding doors. He is spraying lubrican based on a guess! He doesn't even look at the places likely to be for lubrication application and he is not watching where he sprays or over sprays. Clumsy!
@stone-rock
Жыл бұрын
"Can't hurt"
@kerryhirsch9705
9 ай бұрын
lotta bitching on this comment board but not a lot of alternative suggestions
@larrywmayes1561
Жыл бұрын
Why didn't he just lube the van all aver?? Joking!!! Lubricants in the wrong place can damage surfaces that might disintegrate from the chemical make up! Know the places to lube and don't leave lubricant in in a bearing track as it collects dirt, dust. All that grit becomes an abrasive you may have to power wash out, if you can before real damage is done!
@user-us4kw9rb8r
10 ай бұрын
I got a 1998 toyota sienna and the sliding door sticks shut and you have to push it from inside and outside of door to get it opened. Any idea how to fix this issue
@MikeandLisasExcellentAdventure
10 ай бұрын
no sorry. This was my parents car and they no longer have it.
Пікірлер: 20