If only we could took care of ourselves as well as we take care of these tools...
@thekovkan
4 күн бұрын
Just bought my first Safety Razor. Thanks for the advice!
@blacklandrazors
4 күн бұрын
Welcome to wet shaving and thanks for watching! If you have any questions, hit us up. We've happy to help even if it's not on of our products.
@cariza5
Жыл бұрын
Everytime after I shave, I fully disassemble my 3 piece DE Razor and use one of my own used toothbrushes with dish detergent on it and clean and rinse and I use a paper handkerchief to dry the razor and for the DE Blade, I rinse it under water and I touch the edges of the blade but in a outwards position on the blade and when I dry the blade, I use the paper handkerchief and I first damp it and then go along the edges of the blade.
@unclelshaves
Жыл бұрын
Thanks, good cleaning tips.👍🤠
@TiberiusTeng
Жыл бұрын
I recommend using a toothbrush, works wonderfully.
@Shaverboy516
Жыл бұрын
I wouldn’t use the Q-tip in the hole of the razor handle because it might separate and get stuck in there. Instead I use a can of compressed air and it blows the water out.
@blacklandrazors
Жыл бұрын
Air is good too! For the q-tip, you have to thread it in and out. Jamming it in without twisting will definitely cause it to separate. Threading keeps it whole.
@Nav_M
Жыл бұрын
I personally wipe down the outside of the razor and then take a deep breath and blow the water out from the razor head. This gets 90%+ of the water out. I've found it to be very effective.
@blacklandrazors
Жыл бұрын
Whatever gets the water out! That's really all that matters.
@robertmacmoneagle6917
Жыл бұрын
Shane I live in a hard water area and limescale builds up very quickly. Any ideas as to how to deal with that? Regarding the comment here where one fella mentioned using a toothbrush? Wouldn't that scratch the razor?
@blacklandrazors
Жыл бұрын
@@robertmacmoneagle6917 You can use a vinegar bath to help with limescale. Toothbrush can work depending on the softness of the bristles and on the finish you're trying to clean. I wouldn't recommend it on a polished finish.
@robertmacmoneagle6917
Жыл бұрын
@@blacklandrazors I did wonder as regards the toothbrush. I'm thinking of maybe using interdental brushes to clean the lather channels on my 6S plates. I guess I'll just have to accept scratches as the limescale will just keep building.
@DanielMillerz
Жыл бұрын
Awww I tought there's the announcement of the upcoming razor, but it's just a how to vid. Anyway...was quite helpfull for newbies but hopefully we will get some hints about the main project in the next one. Cheers guys
@blacklandrazors
Жыл бұрын
Don't worry. Those vids are cooking, too! We're working on increasing our video output to 1-2/wk. That will be a mix of content like this as well as new product stuff. :)
@cariza5
Жыл бұрын
@@blacklandrazors Everytime after I shave, I fully disassemble my 3 piece DE Razor and use one of my own used toothbrushes with dish detergent on it and clean and rinse and I use a paper handkerchief to dry the razor and for the DE Blade, I rinse it under water and I touch the edges of the blade but in a outwards position on the blade and when I dry the blade, I use the paper handkerchief and I first damp it and then go along the edges of the blade.
@tukulitozakayamas2103
4 ай бұрын
my de89 has a tinny bit of rust under the head where all the hair and soap "drain" while shaving
@stevekake3359
3 ай бұрын
After cleaning I put a drop of coconut oil on each edge of the blade. keeps oxidation off the edge and makes the blade last WAY LONGER. Respond?
@blacklandrazors
3 ай бұрын
Interesting! I hadn't heard of that one. It certainly wouldn't hurt so I don't see a problem with that. It's not clear exactly why it would help, but it sounds like it's working for you and there's no harm done.
@stevekake3359
3 ай бұрын
@@blacklandrazors Edge isn't exposed to air.
@Jcc988
10 ай бұрын
Can you use toothpaste on a chrome plated razor?
@blacklandrazors
10 ай бұрын
It's not a great idea. Chrome is tough, but toothpaste is an abrasive. So you could see some fine scratches and swirls in your chrome after scrubbing with toothpaste. It's probably not going to damage the chrome too badly, but you're almost always better off with a non-abrasive cleaner.
@jddyea5527
Жыл бұрын
Do it with a razor where the head doesn't come off stop doing the easy s***
@blacklandrazors
Жыл бұрын
We don’t produce any razors like that, but the same process applies.
Пікірлер: 24