Salt off makes a inline injector that you hook up directly to your hose. You can spry just water or the salt off and water solution. Makes all of this much quicker. For those heavy build up spots, the bug sprayer is a great option to have. The dispenser will help flush the motor salt out as well. Make sure you start your engine and make sure it is hot. If you do not you are only flushing part of the salt out of your motor (Thermostat has to be open, or it is just a partial flush). Use the muffs, use just water until the motor gets to temp then open up the valve on the injector and let it clean all the salt out of your motor. When the bowl of the injector turns back clear you have used all of your salt off.
@mikeymike6705
2 жыл бұрын
Awsome video
@fckvar5599
3 жыл бұрын
I like it more than Fiberglass in many ways, only issue is the noise when we are in the ocean jigging. Any methods to reduce to hull noise when the waves hitting it. Thanks 🙏
@LostAngler
3 жыл бұрын
Honestly not really. The only thing that you can do to reduce noise is to make sure you don't have dead space in the hull between the hull and the foam. If your hull is fully foamed then it is as quite as a fiberglass boat. But that isn't always doable unfortunately.
@fckvar5599
3 жыл бұрын
@@LostAngler definitely gonna try to pour the foam in, hopefully it would at least reduce the chopping sound. Thanks 🙏
@kumsuk77777
Жыл бұрын
All boats collect water under the deck. So spraying the outside does not prevent corrosion inside the boat where you cant see it
@petejablowski2123
Жыл бұрын
Yes sir , I just put the exact comment before I seen yours . I fish hard and get a lot of waves over the bow and a lot of fish on the deck in Massachusetts sometimes 100 stripers a day ,or100 sea bass . I live my Lund but I’ll never buy aluminum again there’s no way to stop corrosion from heavy use , sure weekend warriors are fine that catch a few fish and use the boat four times a month But for someone who guided like me it’s not practical.
@realreviews2003
4 жыл бұрын
G3 Center Consoles are becoming popular in Montana believe it or not. A lot of guys are running Jet outboards on them, but now I'm thinking I might buy a G3 CC DLX with a Yamaha 150 with a prop like yours and run it down to GA for a couple months fishing the near shore stuff. Thanks for all the tips, it helped a lot! BTW- I'm a big guy 6'4" 245, do you think your boat would fit me or would I be better off jumping up to the 22'?
@LostAngler
4 жыл бұрын
Dude you wouldn't phase that boat one bit. I'm 230lbs and we take the whole family out and are still rolling just under 50mph
@PerfectionHangover
4 жыл бұрын
We bought a V175 combo (Tracker aluminum fish n ski) new last year in Illinois and moved to the Gulf Coast this year. Frustrated that this boat isn't typically. used for saltwater, I'm wondering if instead of selling and losing our asses on it, we could somehow modify the boat....buy a new trailer, replace the carpet with seadeck...what do you think? We're having no luck selling it unfortunately.
@LostAngler
4 жыл бұрын
Its a very nice boat. I would get an aluminum trailer and I would wait until the carpet tears up before replacing it. And there are a lot of good flooring options so take a look at what's out there
@PerfectionHangover
4 жыл бұрын
@@LostAngler So you think it's worth keeping?
@LostAngler
4 жыл бұрын
@@PerfectionHangover are you guys enjoying the boat and does it meet your needs?
@PerfectionHangover
4 жыл бұрын
Lost Angler my husband is struggling to enjoy it only because he’s so pissed off that we were told it would be perfect for saltwater and finding out that it’s not 😬
@LostAngler
4 жыл бұрын
@@PerfectionHangover how so?
@computerchip127
4 жыл бұрын
there is nothing more fascinating than watching some read.
@LostAngler
4 жыл бұрын
So, I dont have a future in audio books?! Well damn.
@lydiaanderson4020
2 жыл бұрын
@Hello Chip Knight, How are you doing?
@wingo19
3 жыл бұрын
Question bud. I just got a new G3 boat similar to this. Does your boat have tack weld marks down the sides? My wife says I ordered an expensive boat and it came pre dented? Just curious - the dents bother me but if it's standard I can live with it. Thanks
@LostAngler
3 жыл бұрын
Can you email me a couple pictures? lostanglerflies@gmail.com
@petejablowski2123
Жыл бұрын
I love my Lund but I’ll never buy an aluminum bust for saltwater use again , not worth the hassle. Eventually anyone will have problems with aluminum boats in salt water especially if you are taking waves over the bow and salt water is getting in places that can’t be cleaned.
@rossevans1774
Жыл бұрын
When top flushing your Yamaha, better not to run it at all. It's through the lower water intake that the impeller draws water. If there is no water entering in the right direction, it is possible to damage the water pump.
@larryworrell6324
11 ай бұрын
Get an old esky full of water and put the prop in it for a flush mate. Let’s you run it on land
@melloreel
4 жыл бұрын
I’m curious about an aluminum saltwater bay boat. Are you happy with yours? Ride rough due to weight ratio?
@LostAngler
4 жыл бұрын
I am very happy with my boat. And fiberglass boats are getting lighter every year so there isn't as much of a difference any more. After having an aluminum boat, I don't think I'll go back to glass.
@melloreel
4 жыл бұрын
Lost Angler thanks. I live on the Ga coast, and just not sure it would be a good inshore boat here? We have 9 ft tides, and it can get rough quick.
@LostAngler
4 жыл бұрын
@@melloreel my suggestion is to get in touch with owners in your area and get their opinion. Also sea trial one before you pull the trigger
@jennymallin9404
3 жыл бұрын
is it ok to leave salt off on it or do you rinse everything afterwards
@LostAngler
3 жыл бұрын
I rinse everything
@alfredoalvarez4259
4 жыл бұрын
Get a mic Wally
@LostAngler
4 жыл бұрын
I have a directional mic on the camera but I do need a better set up
Пікірлер: 36