If you liked this video make sure to check out my video where I designed, 3d printed and installed a custom intake duct on my 350z! > kzitem.info/news/bejne/yGtntX2ZjKyYopw
@davidmurray199254
2 жыл бұрын
Great idea splitting the design so the tabs are seperate. So much quicker and easier to replace if required.
@EndMotive
2 жыл бұрын
Exactly! The support material was giving me issues on the main body too, so it was a win-win
@EnnTomi1
Жыл бұрын
this is where truly 3d printing shines.
@EndMotive
Жыл бұрын
I agree!
@Auxbeam
2 жыл бұрын
Well That's fit like a factory panel
@EndMotive
2 жыл бұрын
Thank You! and yes it does
@Bert_de_Wit
Жыл бұрын
Can't even begin to explain how impressed I am. The possibilities for other custom parts (for any car and any purpose) are virtually endless. I LOVE how you made it look factory. Well done sir!
@EndMotive
Жыл бұрын
Thank you for the kind words, I appreciate it!
@BHARGAV_GAJJAR
Жыл бұрын
Very impressive practical use of 3D printing, you should make a video on how you converted original piece into the 3D printed part.
@EndMotive
Жыл бұрын
Thank you, I have a video coming out tomorrow going over the process more actually!
@chrisperrywv
Жыл бұрын
This is also what I came to ask. 😊
@EndMotive
Жыл бұрын
@@chrisperrywv I will try to make a video going a bit more in depth!
@thetailgunner777
Жыл бұрын
@@EndMotive I just found you and wanted to say the same as Chris. Subscribed!
@garrethatchard2132
6 ай бұрын
Where is this video explanation?? I cannot find the video but would love to learn how you did it@@EndMotive
@TheCoryjones26
5 ай бұрын
I like the way you showed all the mess ups. People always want me to make something they don’t relish how many you have to make to get it right and the time invested.
@EndMotive
5 ай бұрын
Thanks, I probably left out a couple of failures as it was lol. Lots of trials and errors.
@styxx0500
Жыл бұрын
Looks better than anything that could come from the factory! Excellent work!!!
@EndMotive
Жыл бұрын
Thanks!
@Tumi_n_Company
5 ай бұрын
AMAZING WORK!!
@EndMotive
5 ай бұрын
Thank you!
@kesterbelgrove818
Жыл бұрын
I give you 10/10 wow bro that looks like it’s from the factory
@EndMotive
Жыл бұрын
Thanks!
@kingfish9677
Жыл бұрын
Insanely awesome video and workmanship. Wow.
@EndMotive
Жыл бұрын
Thank you!
@toba9005
Жыл бұрын
That’s an OEM fit 😮💨👌🏼
@EndMotive
Жыл бұрын
Very much so! I have had people in the truck that though it was an original piece.
@harthenry
Жыл бұрын
I love it when a plan comes together
@EndMotive
Жыл бұрын
Yes, it is nice when it does...but I have just as many failures as successes it feels like lol.
@sjcwindsurf
Жыл бұрын
Nice design and work!
@EndMotive
Жыл бұрын
Thank you!
@standupg4m3r
Жыл бұрын
Love everything about this. Best of luck with the sales!
@EndMotive
Жыл бұрын
Thank You!
@jamesroviezzo7924
Жыл бұрын
That is a good thing about 3d printers you can print spare car parts
@EndMotive
Жыл бұрын
Indeed, I am working on a few other replacement style parts right now!
@joannehart9624
Жыл бұрын
Great use of 3D printing capability! I love the idea of being able to make things that you can envision, but nobody actually produces. Well done!
@EndMotive
Жыл бұрын
Thank you!
@chrish1695
Жыл бұрын
WoW! incredible engineering. Truely a work of art!
@EndMotive
Жыл бұрын
Thank you!
@The-truth-is-valuable.
Жыл бұрын
I think, this looks really good.
@EndMotive
Жыл бұрын
Thank You!
@NicholasHoggan
Жыл бұрын
Rad video. I like how you show trial and error that came up.
@EndMotive
Жыл бұрын
Thanks! New processes always have a bunch of fails lol
@FLG8r
Жыл бұрын
practical application of 3d printing; if you can't find a product you need from the store or Amazon, make it yourself.
@EndMotive
Жыл бұрын
Exactly, 3d printing has dramatically changed the way I look at most project I do now days!
@dennisbott2069
8 ай бұрын
Very innovative use of 3D printing parts otherwise not available. Make some for F150's 🙂
@EndMotive
8 ай бұрын
Thank you, I will give it some thought!
@neonnerd1364
6 күн бұрын
I really need to invest in a 3d scanner.
@EndMotive
4 күн бұрын
Einstar or the Revo lineup are solid units for the price. Scanning has its own challenges, but once you figure out a decent workflow, it is a game changer.
@noahbush8563
Жыл бұрын
incredible print quality!!
@EndMotive
Жыл бұрын
Thanks!
@squidy.8520
2 жыл бұрын
Amazing Work! Glad you are back!
@draconis112
Жыл бұрын
If not already suggested, bondo is another alternative to the epoxy. Love how it turned out though, nice work.
@EndMotive
Жыл бұрын
Thanks, yes that is usually how I finish parts out, I just wanted to test an epoxy but won't be doing it again....it is way harder to sand
@kjhaglfjhgfasd
Жыл бұрын
Your cad skills are incredible man.
@EndMotive
Жыл бұрын
Thanks! I still have a lot to learn!
@ItsJustPhillip
Жыл бұрын
This could be a very lucrative business venture for you!
@EndMotive
Жыл бұрын
Thanks!
@fatmanoverlanding
Жыл бұрын
Good work.
@EndMotive
Жыл бұрын
Thanks!
@EnglishCharlie
Жыл бұрын
Looking good. Amazing how some videos get huge numbers of views! Subscribed amd will catch up on some ofher videos. Im planning a roof console build in my 51 GMC.
@EndMotive
Жыл бұрын
Thanks! And yes the youtube algorithm is a mystery lol
@P_double_H
Жыл бұрын
I need this done to a 2016 outlander to be able to mount a Kicker KX remote.
@keldonator
Жыл бұрын
Wish I could design stuff like this lol, I made a rectangle box and still had to cut parts down to fit 😅
@EndMotive
Жыл бұрын
Just keep practicing!
@thegreyspectre9838
Жыл бұрын
Never thought about an JB Weld overlay. Might have to try that.
@EndMotive
Жыл бұрын
Don't lol, I thought it would work well....and I mean it is tough, but at the cost of being way harder to sand.
@thegreyspectre9838
Жыл бұрын
@@EndMotive Understood. I’m trying to figure out a good way of strengthening a polycarbonate/carbon fiber to keep it from splitting across the layer direction. Annealing would be great if it weren’t a curved surface.
@TheFlybyman
Жыл бұрын
Wow cool projekt 👌
@EndMotive
Жыл бұрын
Thank you!
@boostedsteve
Жыл бұрын
This gave me a lot of inspiration to get goin on a custom cubby mount for my ktuner. Great video!
@EndMotive
Жыл бұрын
Thanks!
@karlosss1868
Ай бұрын
Not sure how hot it is where you are but ABS amy be right on the borderline for handling direct sunlight especially close to the windshield. The positioning of the partial sunblock film on the window may however save the day. Great project!
@EndMotive
Ай бұрын
@karlosss1868 Thanks!, I have had no problems with abs in the Vegas (115f) heat, but I ended up making one out of sls nylon 12 anyways, no worries now!
@punisherpr
Жыл бұрын
I highly enjoyed this!!! Your work looks impeccable and the fitting is *chef’s kiss* like and subbed! Really looking forward to more of this!!!!
@EndMotive
Жыл бұрын
Thank you, I appreciate it! There will be more!
@Pushyhog
Жыл бұрын
you help alot of people.
@EndMotive
Жыл бұрын
Thanks, I try!
@smfmotors
Жыл бұрын
Sign me up! Take my money!! That looks outstanding!!
@EndMotive
Жыл бұрын
Thank you! If you happen to have a 3d printer, you can download the files here and make it yourself, its going to be a while before I have production going on these.. cults3d.com/en/3d-model/various/auxbeam-8-gang-overhead-mount-for-nissan-frontier-xterra-pathfinder
@smfmotors
Жыл бұрын
@@EndMotive Dang. Sell me that one and you can make another 😉I don't have one but might be able to use a maker center around me. Will see what is available but will keep an eye out!! Killer idea!!
@admiralking
Жыл бұрын
Great video!! Thank you for your efforts.
@EndMotive
Жыл бұрын
Thank you!
@user-ot6wi4sz4c
Жыл бұрын
amazing skills with perfect result.
@EndMotive
Жыл бұрын
Thank you! Cheers!
@sohailmerchant
5 ай бұрын
Nice work bro looks sick
@EndMotive
5 ай бұрын
Thank you, I appreciate it!
@user_unk5
8 ай бұрын
great job on the install, nice and clean!
@EndMotive
8 ай бұрын
Thanks! 👍
@mariajoseandchase
Жыл бұрын
Dude, awesome video.
@EndMotive
Жыл бұрын
Thank you
@208RedNeck
Жыл бұрын
Dang!!! I am in Boise. I would love to chop it up with you and see what we can come up with for Ford Excursions.
@EndMotive
Жыл бұрын
Thanks, Have any ideas?
@208RedNeck
Жыл бұрын
@EndMotive a ton!! Let's see here, overhead console is trash often. Also, many people want to move to 08 superduty doors, dash, etc, but the rear doors of an f350 are like 5 inches to narrow versus the excursion. There's conversion kits for everything else.
@208RedNeck
Жыл бұрын
A lot of parts are pretty easily swappable with the f250/350 models, but if it is excursion specific, it's harder than hell finding parts unless they are being scrapped.
@apaskiewicz
Жыл бұрын
That looks really good! Thanks for the video documenting your process. 😊😊🔥🔥
@EndMotive
Жыл бұрын
Thanks!
@granthamilton6339
Жыл бұрын
Give XTC-3D a shot for coating, works like a charm and sands easily while adding strength to the parts! (might work out to be overall cheaper than JB weld as well)
@EndMotive
Жыл бұрын
Yeah the jb weld was a first test, it was a bad idea lol. Regular body filler is pretty easy to sand and works great, however you are probably right that the xtc-3d would likely add some strength!
@3Dprining.I
Жыл бұрын
The work is well-engineered ..nice
@EndMotive
Жыл бұрын
Thanks!
@AlAmantea
Жыл бұрын
Excellent job!
@EndMotive
Жыл бұрын
Thank you very much!
@lordrussell666
Жыл бұрын
you seem to know how to do this thats amazing
@EndMotive
Жыл бұрын
Thanks!
@HS_COMET
Жыл бұрын
Nice fit. great work!
@EndMotive
Жыл бұрын
Thanks!
@johanerasmus63
Жыл бұрын
Very clean! Looks OEM
@EndMotive
Жыл бұрын
Thank you!
@Atlas.X9X
10 ай бұрын
That looks great, nice job.
@EndMotive
10 ай бұрын
Thanks!
@charliebowen4232
Жыл бұрын
That turned out awesome! Thank you for going through your process! Great video!
@EndMotive
Жыл бұрын
Thank you!
@koalafan1576
Жыл бұрын
That’s beautiful
@EndMotive
Жыл бұрын
Thanks
@christianwolf68
Жыл бұрын
i was thinking the same thing for my Toyota Sequoia. it has a flip down sunglasses holder and i thought how cool it would be if that was for a aux light panel
@EndMotive
Жыл бұрын
I love the position of mine, it is a cool spot for sure!
@Fentertainment
Жыл бұрын
Impressive. I sub'd for more content like this!
@EndMotive
Жыл бұрын
Thanks, I appreciate it!
@NKPGarage
Жыл бұрын
Very nice work!!! Amazing what can be done with at home 3d printing these days.
@EndMotive
Жыл бұрын
Thank you, It is pretty crazy...The process I used before 3d printing would have taken forever with fiberglass and body filler.
@NKPGarage
Жыл бұрын
@@EndMotive It's really amazing. We got our 12yr old son a 3d printer for Christmas, and I am amazed at the quality of things he has been printing.
@pigseye2
Жыл бұрын
Wow! Impressive. Looks great!
@EndMotive
Жыл бұрын
Thanks!
@kirknelson156
Жыл бұрын
Thats cool, and totally looks factory :-)
@EndMotive
Жыл бұрын
Thanks!
@mbzc95
8 ай бұрын
Nice job man!!
@EndMotive
8 ай бұрын
Thanks!
@walterharoldbishop
Жыл бұрын
seamless nice integration!
@EndMotive
Жыл бұрын
Thank you!
@r00t_
Жыл бұрын
Nice work!
@EndMotive
Жыл бұрын
Thanks!
@TheDbcdino
Жыл бұрын
awesome work mate ..
@EndMotive
Жыл бұрын
Thanks!
@danielrichardson3613
Жыл бұрын
Great vid man 👍
@EndMotive
Жыл бұрын
Thank You!
@smartmonkey8187
Жыл бұрын
Молодец, очень аккуратная работа! Привет из Владивостока😊
@EndMotive
Жыл бұрын
Awesome, thank you!
@AnEngineersPOV
6 ай бұрын
great, great work
@EndMotive
6 ай бұрын
Thank you!
@BigRigSRT
Жыл бұрын
This is amazing
@EndMotive
Жыл бұрын
Thanks!
@Frankie_Freedom
Жыл бұрын
This is awesome
@EndMotive
Жыл бұрын
Thank you!
@jackrussellville
Жыл бұрын
That's awesome! Love the ingenuity
@EndMotive
Жыл бұрын
Thank you!
@MikeHarris1984
Жыл бұрын
Wow, that paint and texture looked like a factory piece when I saw it on the rag as you assembled it (still waiting to see in the car on the video), but damn that's looking good so far!!! EDIT: And holy crap!!! That looks amazing!! Did you use the textured paint to get that finish? How did you get that factory texture finish?? I wonder if there is a way to get that in Fusion or something and add that to the print. Just tiny "bumps" to match factory, so your print detail would have to be super fine. but would be awesome to print factory style finished parts!
@EndMotive
Жыл бұрын
Thank you, I have played around with trying to add texture into the 3d model but have had very limited success. The texture was added with the SEM texture spray, it works great!
@carbonarne675
Жыл бұрын
Well done! Finished result looks good
@EndMotive
Жыл бұрын
Thank you!
@fr8xusa
Жыл бұрын
Awesome look factory!!!
@EndMotive
Жыл бұрын
Thanks!!
@BrianHeplerSasquatch
Жыл бұрын
This really does show how 3D printing enables rapid prototypes and iterative development. Great job. Do you have a video on the 3d scanning with reference dots?
@EndMotive
Жыл бұрын
Yeah, it really speeds up the process. I do not have a video with the dots for this part but have featured a few other parts with the alignment points.
@TheAmericanDreamChaser
Жыл бұрын
That's awesome dude I need to learn how to do s*** like that😂
@EndMotive
Жыл бұрын
Thanks! I just learned through trial and error....and a bunch of youtube videos lol
@hexhound2273
Жыл бұрын
Very nice!
@EndMotive
Жыл бұрын
Thanks!
@luk_deg
Жыл бұрын
Looks so good! I wish you would have a 5th gen Ranger!
@EndMotive
Жыл бұрын
Thank you, I might be willing to make parts for one in the future!
@aaronho4242
Жыл бұрын
thats so funny i did something similar for my friend 2 years ago.
@EndMotive
Жыл бұрын
Nice!
@booboo699254
Жыл бұрын
That looks awesome! Minor comment, you said taller folks might have more interference... I would have thought a shorter driver can see better since the mirror would be angled down.
@EndMotive
Жыл бұрын
Thanks!, It doesn't bother me and leaves rear visibility totally usable...I am 6'2". Sitting high enough the mount does block a little, if I slouch and angle the mirror to fit, it does improve visibility slightly.
@jmd1743
Жыл бұрын
You should make a niche with 3d scans for other companies & hobbyist.
@EndMotive
Жыл бұрын
Good idea, I have been working on something similar in the background for a while now actually!
@kreach3r
Жыл бұрын
Excellent!
@EndMotive
Жыл бұрын
Thank you!
@petrpesek8177
Жыл бұрын
I know, it's too late, but I would definitively rotate it a bit(approx. 30 deg.) to a driver's side for better acces.15d
@EndMotive
Жыл бұрын
It would be nice, but I wanted to keep them straight. Because of the distance, it does not feel like the buttons are turned away from the driver.
@c.j.1089
Жыл бұрын
Looks good! Good job!
@EndMotive
Жыл бұрын
Thank you!
@frikkiesmit327
2 жыл бұрын
Nice work
@EndMotive
2 жыл бұрын
Thank you!
@DerJohii
Жыл бұрын
Some years ago I also made some car accessories like a radio cover and some can holders with different materials. I spent days of sanding, priming, and painting the parts. Over the years they all bent by the influence of the elements (heat, cold and humidity). It was a very painful experience. I hope it won't happen to you! Edit: the materials I used were mostly PETG and ABS, but also some in PLA. All the materials behaved the same way!
@EndMotive
Жыл бұрын
Yes totally possible. Some just last a little longer than others!
@bitosdelaplaya
Жыл бұрын
Very good question. So just go to RESIN parts
@DerJohii
Жыл бұрын
@@bitosdelaplaya Btw. with Resin parts this phenomen is even worse.
@bitosdelaplaya
Жыл бұрын
@@DerJohii ??? I talk about RESIN printer. Resin is UV resistant and heat resistant
@DerJohii
Жыл бұрын
@@bitosdelaplaya Heat resistant, yes. Have you ever been putting your curing resin part too long under UV light? It is deforming and getting extremely brittle and hot because of reactions going on in the part. ;-)
@user-cg6ks6cl7y
Жыл бұрын
Действительно нужное применение 3 д'принтера. 👏
@Mamologp
Жыл бұрын
Simplemente impresionante. Saludos.
@EndMotive
Жыл бұрын
Thanks
@Falcon_Overland
Жыл бұрын
Awesome can I buy the files to modify in fusion 360? Would love to make it fit my 80 series land cruiser
@EndMotive
Жыл бұрын
I have them available on cults3d.com > cults3d.com/en/search?q=auxbeam
@Solvefunction
Жыл бұрын
awesome work!
@EndMotive
Жыл бұрын
Thank You!
@chrise6496
2 жыл бұрын
Hoping this will go up for sale 🤞
@EndMotive
2 жыл бұрын
I have gotten pretty good feedback from here and my IG, It likely will!
@jaycamilien1530
Жыл бұрын
@@EndMotive i would like to buy one
@pironiero
2 ай бұрын
i fucking love future
@mjh96701
4 ай бұрын
looking to do something similar to mount an AuxBeam 8 switch control panel in a 2019 GMC Canyon SLE Extended Cab.
@EndMotive
4 ай бұрын
You got it!
@J-cos
Жыл бұрын
That's awesome!
@EndMotive
Жыл бұрын
Thank you!
@matthiasschmidt3366
Жыл бұрын
10 from 10 ⭐⭐⭐⭐⭐⭐⭐⭐⭐Top👍👍👍
@EndMotive
Жыл бұрын
Thanks!
@nestorgarcia2299
Жыл бұрын
Nice Work !
@EndMotive
Жыл бұрын
Thanks!
@rondo122
Жыл бұрын
that is nice and neat!
@EndMotive
Жыл бұрын
Thank you!
@shawnwilliams5616
Жыл бұрын
Great video. Could you do a video on how to make the tabs?
@EndMotive
Жыл бұрын
I will try!
@renomacca1967
Жыл бұрын
parts for the nissan should fit the renault and gmc aka vauxhall
@HondaWyo
Жыл бұрын
damn i need that on my ram
@EndMotive
Жыл бұрын
I have not made one for anything other than the Frontier so far, but I am open to it....when I finish up some of my other projects.
Пікірлер: 353