Okay, I'm here to watch it again. And just saw Herobrine in the Thumbnail. 😂
@MrCube6
3 жыл бұрын
First person ever to notice that!
@AceX_Editz
Жыл бұрын
@@MrCube6 lol
@Laslalallaalla
Ай бұрын
@@MrCube6…sure
@stuffedcheese673
6 ай бұрын
I HAVE THE ANSWER TO THE LEVER PROBLEM: You will need 1 repeater, 2 sticky pistons, 1 observer, some redstone dust, 1 *button* (not lever) 1) Replace the lever with a repeater set to 1 tick facing towards the block the lever used to be on (you'll need to place a block underneath where the lever used to be to place the repeater but that's fine) 2) Diagonally to the right behind the repeater, place a redstone block (it shouldn't be powering anything when you place it) 3) To the right of the redstone block, place a sticky piston so that, if it were to be extended, it would push the redstone block behind the repeater, powering it. 4) 3 blocks to the right of the sticky piston, place another sticky piston facing the same direction as the first (there should be two empty blocks between the pistons) 5) Place an observer on the sticky side of this piston with the red spot facing the back of the first piston 6) Now you can wire the sticky piston connected to the observer to a *button* (not a lever) anywhere you want. I got this solution from Kwipla who did a similar hidden staircase but actually explained how to extend the input lever. kzitem.info/news/bejne/tWeg06SVkaKEp6w
@Crazygamer21
2 ай бұрын
thank you so much, massive help 🙏
@Gabry_Marti
2 ай бұрын
bro thank you very much, I rebuilt this 3 times because it didn't work, but finally I found your comment, well written and very understandable and now it works!!! THANK YOU 🙏🏼
@leonutler4428
2 жыл бұрын
hey i build it. it works great. the big problem i got is the lever to activte the stairs. its completly useless in the position. i want to have a lever on top of the floor and one below the stairs so i can easily open and close it. i tried multiple solutions but it allways breaks . any help?
@its.springy8308
2 жыл бұрын
How would you open it from the surface? Because it only lets me open it if I’m inside the contraption
@machspeed3333
Жыл бұрын
Hey you still want the answer? I figured it out
@brn5234
Жыл бұрын
@@machspeed3333 answer pls
@machspeed3333
Жыл бұрын
So the issue with moving the lever to the surface is that the one he put on the block activates the red stone on top of the block and the repeater on the bottom, to locate the lever anywhere else you have the add an extra line of red stone to make the lever activate the repeater and top redstone without being on the block itself. This is insanely hard to explain but I tried
@sharalakid
Жыл бұрын
Would you mind telling me how you went about getting the lever to the surface? i've tried everything and if i expand the redstone to move the lever, it breaks the entire contraption (displaces blocks). I know it's a noob question but im pretty new to redstone.
@SumsMeUp1
Жыл бұрын
I have the same issue
@aviatorlachlan9547
Жыл бұрын
You'll need to hook redstone up to where the lever is. On the block where the leaver is shown you'll need a redstone connection to run to the redstone above the block and below. I used slabs to connect the top bit then brang the bottom bit up to hook it into one line.
@Dragonball3D
2 ай бұрын
just put a repeater into the block where the lever is not above DIRECTLY in
@thelittleeegger
Жыл бұрын
for someone who has been playing the game since beta and have never figured out redstone. i just spent the last hour trying to figure out how to extend the lever and gave up and just made a hidden lever lol. tutorial was amazing and easy to follow just rlly frustrated about lever placement.
@troyramsden9555
Жыл бұрын
could you make a video showing us how to fix the lever problem I've been trying for to long and its driving me crazy
@thoddiver
2 жыл бұрын
Never use dirt in redstone, an enderman will wreck your day.
@martijnschonewille5564
3 жыл бұрын
Took me three tries cause I placed an observer wrong, but got it in the end! Thanks for the tutorial! What will your next redstone tutorial be?
@MrCube6
3 жыл бұрын
Lol!! Good thing you stuck with it and hope u like it! :D So I already made a ton of tutorials since then, like a 3x3 sand door, cycling storage system, and awesome lightning rod door. But for the next tutorial I’ll probably make a 3x3 railway door. Which is basically a 3x3 piston door with a rail in the center. So it should be pretty cool! Anyway thanks so much for stoping by the channel and hope you enjoy your contraption!
@moonman2305
10 ай бұрын
Works just fine as it is, however the lever extention needs to be added, tried several times to connect both top and bottom redstone wires where it gets activated by the lever, broke the contraption, rebuilt it several times, broke it again, rebuilt it again and again. After a whole day of my life has passed, I ended up destroying the build and moved on to searching for another video tutorial. Brother I'm still thankful for this video, didn't work the way I wanted to but I did learn more about redstone. Keep up the good work
@manulayuganethnaidhahewa3729
2 жыл бұрын
Can you explain how to extend the input circuit...
@Garebanaan
2 жыл бұрын
Use a repeater?
@Will-j4p8w
6 ай бұрын
just put redstone next to the bottom input and 1 next to the top input and then connect them
@Bensabeast
2 жыл бұрын
I've made this thing like 9 times but people (including me lol) keep breaking it. is it possible to make a switch that cant break the whole system if its misclicked?
@MrCube6
2 жыл бұрын
Yea you can! So I don’t have a tutorial on how to make your build spam proof, but you might be able to follow this tutorial: m.kzitem.info/news/bejne/22eb2qals6ZieIY I hope this works, if it doesn’t then just search up how to make a redstone build spam proof! Thanks so much for watching and sorry this has been such a headache! :)
@Agent_Evol
Жыл бұрын
thanks for the amazing redstone machine but im really confused about how to expand the lever every time i do it it just breaks it (displaces block) can you please show how to do it?
@mrsirdba
5 ай бұрын
Machine works wonderfully! (totally didnt have to rebuild it because I managed to build it half-backwards the first time)
@kpoplover4064
2 жыл бұрын
This is exactly what I’ve been looking for, thank you for making this!
@mrboba3335
6 ай бұрын
how do you put the lever in aa different spot
@amairplanebrrrpppptttttt9094
Жыл бұрын
tried this in 19.4 java and it still works. the only problem im having is moving the switch is there a way i can move it without ruining the mechanism?
@MrCube6
Жыл бұрын
If you run a repeater into the block that the lever is supposed to be on then the contraption should work normally. If you run a redstone line into the block, then the redstone dust underneath does not get powered. I hope this helps :)
@KodeGringle
2 жыл бұрын
For those of you looking to get an external input, the lever powers redstone underneath the block its placed on, rewire some down there to power it and you should be good
@KodeGringle
2 жыл бұрын
I've done very little with restone, but I managed to get it working, hopefully it'll work for you. Don't ask me for any tips as I've got no earthly idea how this works
@orion7353
11 ай бұрын
Tried everything in the book and nothing worked, this comment fixed it for me though! Thank you for adding this!
@r3mdh
11 ай бұрын
What an absolute mess. This video BLOWS.
@karolinewitek158
3 жыл бұрын
This didn’t work for me
@MrCube6
3 жыл бұрын
Can you please explain what is wrong so I can try to help you! So sorry it doesn’t work. This design is a bit old so i might come out with a better video soon.
@NOSCOPX
Жыл бұрын
Can someone explain how to move the lever to the surface? I have read some comments but still didnt quite understand.
@cosigamescz4323
2 жыл бұрын
Okey someone make the "and" counter so i dont must count it XD
@mrjagermeister86
Жыл бұрын
Attempted on java, didn't work. Completely tore down and rebuilt again and still didn't work.
@MrCube6
Жыл бұрын
Ahh man I’m sorry about that… im not really sure what to tell you, I’ll be making a better, smaller version on my second channel in the future. Thanks for watching tho :)
@jamen1235
3 жыл бұрын
Hey I really enjoy the build, but I had one problem. Im really new to redstone and I don't know how I would put an external lever or button outside do you think you could make a short tutorial pls and thank you!!!
@jamen1235
3 жыл бұрын
Btw i liked and subed!! :)
@MrCube6
3 жыл бұрын
@@jamen1235 Thanks so much! I'll try to make a video explaining how to do this because it seems that a lot of people are struggling! The video might not be out for a while, because im working on some other stuff rn, but I'll definitely make a video! Thanks for commenting!
@jamen1235
3 жыл бұрын
@@MrCube6 ok thank you sm for replying Ive been breaking my redstone everytime i try to wire my lever somewhere else its so frustrating but thanks anyways *ps pls make a video i cant figure it out ♥
@gryffensteckbauer4313
3 жыл бұрын
Can you make the vid
@MrCube6
3 жыл бұрын
@@gryffensteckbauer4313 Thanks for commenting! Check out my most recent video because I explain all about this! - How to Add a Button or Torch key to your redstone contraptions!
@_LeoO0
6 ай бұрын
Hi! Thank you very much, it helped me a lot! I'm bad at redstone XD On the other hand, how should I get the joystick to the surface please, that was my goal :')
@lilyb76
Жыл бұрын
Thanks MrCube6. Just made this for my escape room build. Still works in 1.19
@pippy_jones7675
Жыл бұрын
mine wont replace the second stair and i cant for the love of god figure out how to fix it
@Narwhalco
Жыл бұрын
Welp accidentally made the contraption 1 down and to the left. Rebuild here I come!
@dingleberry4896
Жыл бұрын
makes a tutorial but doesn't even show how to open it from the outside lol
@MrCube6
Жыл бұрын
That’s because I’ve got another tutorial to cover you! (It’s how to add a button or lever to any build) im going to be making updated tutorials on my second channel which will be better quality! Hope this works :)
@boas7742
2 жыл бұрын
Hey man I’ve been trying to connect a t flip flop to this but been having difficulty I read one of the other comments and couldn’t replicate it any help
@gavinfishman4714
2 жыл бұрын
If your on bedrock it might not work
@gavinfishman4714
2 жыл бұрын
A fix is to put a piece of red stone under the red stone torch
@MR_DUCK190
Жыл бұрын
hey MrCube6 i was just wondering if you could do a new turtorial that works for 1.19.3
@MrCube6
Жыл бұрын
Check out on my second channel!! If I make a tutorial it will show up on there!
@MR_DUCK190
Жыл бұрын
@@MrCube6 thank you
@Froggled.
2 ай бұрын
I can confirm that this still works is 1.21
@Lyca_
2 ай бұрын
thx alot ❤
@aidanmcclearn545
2 ай бұрын
@@Lyca_ @MrCube6 the sticky piston with the observer on it next to the redstone torch won't activate when I place it. Is this a recent fix or is there something I could be forgetting?
@aidanmcclearn545
2 ай бұрын
10:10
@animatorexe9616
3 жыл бұрын
And what if you want to move the leaver ??
@MrCube6
3 жыл бұрын
I would recommend following this tutorial! kzitem.info/news/bejne/lWmumGSdnWeIhKQ
@derjustice3177
Жыл бұрын
Hello, I've watched the video, but is there a way I can make the lever so that it's somewhere else?
@MrCube6
Жыл бұрын
Take a look at my “how to add a button to any Minecraft build” video for more info! Thanks for watching!
@ukrainium_92
3 жыл бұрын
Great tutorial! I rewatched it at least 7 times lol cuz my idiotic self breaks the fricking thing every time I try to wire it up with and other input but that's on me. Edit: frick it's 8 times now. I accidentally right clicked water all over it
@MrCube6
3 жыл бұрын
Lol nooo not water! That’s awesome! Glad you stuck with it and finally finished it! Now comes the hard part, making a secret base! GL
@ukrainium_92
2 жыл бұрын
@@MrCube6 it’s been some time but I just checked on your channel and dang you grew, great job
@p3dro_gaming
Ай бұрын
how are you gonna make this and not add the levers you had in the intro, lame
@amualkanth382
27 күн бұрын
Calibrated sulk sensor
@amualkanth382
27 күн бұрын
Calibrated sulk sensor
@prodo7398
Жыл бұрын
letsgo 3rd time hopfully this stupid machine will rn finaly works like for a moment and then after i put the lever's womwhere to open and close it it just destroys itslef after opening and closing it no still doesnot work im about to destroy all redstone in every minecraft world
@Endergamer2
3 ай бұрын
I am not sure what I have done wrong, i followed all the steps but instead of replacing the top 2 stairs with dirt it just moves them to the correct location. can someone help?
@aidanmcclearn545
2 ай бұрын
I tried placing the sticky piston like @MrCube6 did at 10:10 but it won't activate when I place it? Is this a recent fix?
@tylertackett6179
28 күн бұрын
Don't work for me after you place the first Redstone torch the sticky piston doesn't activate like in the video what did i do wrong?
@DRoRy_zilberg
Жыл бұрын
15:10 After trying about five different doors and seeing that on the first click it didn't work as a mat I had a heart attack why do you only say that at the end of the video?
@kizzenVee
2 жыл бұрын
Sorry but i love all your other content but I wasted 30mins of my life BUT keep up all of your good vids XD
@James_gamer07792Games
Ай бұрын
when you flip the level twice it still looks weird and totally not hidden I wasted 20 minutes of my life for nothing
@bp.pradhan9494
3 жыл бұрын
Disliked. At least you could have put java edition in the title.
@MrCube6
3 жыл бұрын
The KZitem algorithm favors keywords in the titles and descriptions. So when I add Java edition into the title is clutters up the title making it less likely to be watched. I try to maximize keywords to rank my video above videos that have already been made. I beaut Java edition at the top of the description tho... So sorry and thanks for watching.
@MalthaeleanJr
3 жыл бұрын
Such a snowflake
@RobloxYoutuberGamer905
11 ай бұрын
thumbnail: why do i see herobrine hiding in the stair near the wall down there
@dylanbehringer9265
4 ай бұрын
so i cant figure out how i can put a lever at the top of the hidden stairs so i can access it from both top and bottom
@marionikolovski4907
Жыл бұрын
It didnt work i did it twice and it didnt work
@MrCube6
Жыл бұрын
Are you playing on Java edition or bedrock edition? Because this build is only meant for Java edition!
@t2fp
2 жыл бұрын
i saw a vid by purpledragonuke with a similar idea but it was createdin like 2014
@oscarthekiwi7956
6 ай бұрын
i built my first red stone build also how do i connect it so the lever can be up at the first stair
@usbuche
10 ай бұрын
either im just dump or idk i just build it twice and both time it destroy itself after two cycles
@osunevil6985
3 жыл бұрын
The second red stone repeater isn’t activating the piston next to it
@MrCube6
3 жыл бұрын
Are you on Bedrock Edition(pocket edition, Xbox, PlayStation etc.) This design sadly does not work with bedrock edition. Go ahead and search up a Minecraft bedrock 1 wide hidden staircase tutorial, so sorry that this didn’t work... if you are not on bedrock, then please feel free to comment again so I can get more details about your problem. Thanks and so sorry again... D:
@nicolaevdmitri5705
5 ай бұрын
was it rlly that hard to add the lever placement? ruined the whole build because of that
@wenndann5708
Жыл бұрын
I have rebuiilted it three or four times in survival and it does not work. I am in Java and am using 19.3. Now I will look for another staircase on youtube.
@frisk.is.agender5732
Жыл бұрын
Thx for the awesome tutorial! I connected the staircase to a jukebox so that it only opens when you play a specific song for a cool secret entrance!
@heatherdemoss5499
7 ай бұрын
How do you do that?
@jakeb7476
2 жыл бұрын
works good and everything jus dont know how to put the switch in the room it needs ti be in
@WhiteZombie91
Жыл бұрын
you should have said about the stair location and orientation from the beginning.....
@RyZe_dabboy
10 ай бұрын
i wanna know how to make it so i can open it from the outside
@DustinKietzman-ee1bj
7 ай бұрын
So one of the pistons isn’t working for the observer any ideas how to fix that
@wexlite5130
8 ай бұрын
when i made it it compeletely destroyed itself replacing its own blocks
@mireksk7165
2 жыл бұрын
i cant believe that i do a 4 mistakes in that and building it for 1 hour
@MauroOTGW
2 жыл бұрын
Why would you put the lever there? It doesn't make any sense
@yasminaloukass3223
3 жыл бұрын
Hi does this work for 1.17+? I’ve spent hours trying to do this and I can’t figure out what I’m doing wrong 😭😭
@MrCube6
3 жыл бұрын
So sorry that you are having trouble D: yea this does work for 1.17+ but it will not work for bedrock edition, which is mobile, Xbox, and PlayStation. This will only work for Java Edition, which is computer. If you are on Java Edition then please explain what your problem is so that I can try to figure out what is happening... thanks so much for watching and im sorry that this isn't working for you...
@MichaelMoreJr
3 жыл бұрын
@@MrCube6 crapi just spent an hour on something that won't work
@dookiesoup9705
2 жыл бұрын
@@MrCube6 does it work on 1.19 because it wont take the first 2 stair back down
@Cj-st7st
Жыл бұрын
At 10:05 The piston you put the observer on doesn't work but I don't get y? (Nvm figured it out you just put abit of redstone between the Redstone torch and the repeater) Also if anyone else can help me out with the issue at 11:10-11:30 nothing happens with the pistons and the repeater when I decide to flip the switch
@SoundblasterYT
4 ай бұрын
how would you put the lever on the outside?
@imanaliraza4084
2 жыл бұрын
This dude from lifesteal really needed some atention before lifesteal
@Adam_r_Johnson
Жыл бұрын
This thing suck man, it doesn't work so something right
@delanya7738
Жыл бұрын
Bro i did everything you said and it didn't workk😂😂
@JutnReacts
2 жыл бұрын
Wasted material and time and it doesn’t work
@easyway5482
4 ай бұрын
it does not work correctly but i'll give it one more try
@frederikbjerrejensen3394
3 жыл бұрын
this would be cool if it actually worked
@MrCube6
3 жыл бұрын
Does it not work for you? If not, then are you on bedrock or java edition?
@calista6529
3 жыл бұрын
@@MrCube6 Its also not working for me. I'm on Java. I switched the lever on and the stairs went down but when I switched it off again, the floor didn't go back over the stairs.
@MrCube6
3 жыл бұрын
@@calista6529 Alright so I'm not 100% sure what the problem is, because you said that when the lever is on(powered) only the stairs go down? When the lever is powered for me the stairs go down but then the floor blocks go over the stairs and then the floor blocks get pushed up into the ground. But just the stairs are going down for you? nothing else happens? Also when the lever is off(unpowered) the floor blocks get pulled down then swapped with the stairs and finally the stairs get pushed up. But for you, when the lever is off, the stairs are still in the same position? If this is the case then I would suggest watching the whole tutorial again :D, also make sure to power the red wool that the lever is on (2:44 power this block) with a repeater if you are trying to move the lever somewhere else. If you do not power this block (2:44) with a repeater then the Redstone dust underneath that block will not power resulting in a messed up build. I really hope this helps and am sorry I couldn't come up with a better solution. Please feel free to comment again if you need more help!
@TheSecondComing1207
Жыл бұрын
@@calista6529 it works for me just fine so are u doing right?
@Us3r0ffline.
Жыл бұрын
It works fine for me so I think you built it wrong man
@spiritwb7301
2 жыл бұрын
I ran into some problem, how can i move the place of the lever
@MrCube6
2 жыл бұрын
So you have to place a repeater going into the lever block and have redstone dust going to wherever your new lever is. If you still confused look in the comments of this video because people have already asked the question and I go a little more in-depth! Hope this helps and thanks for watching and building :)
@i_likefloppas01
7 ай бұрын
Its a great tutorial and it all works but i really need to move the lever to a different place
@boas7742
2 жыл бұрын
I’ve spent FOUR FUCKING HOURS ON THIS THING PERFECTLY COPYING IT AND EVERY TIME THE STICKY PISTONS CANT MOVE
@MrCube6
2 жыл бұрын
Lol sorry I didn’t respond, internet around here is kinda bad. So I saw your previous comment and can you please tell me what the contraption is doing in a little more detail? Also for the T Flip-Flop please watch this tutorial: m.kzitem.info/news/bejne/lWmumGSdnWeIhKQ with that being said can you also tell me what is breaking? The contraption or the T Flip-Flop. Sorry you are having a hard time with this, I try making my tutorials easy to follow. But I cannot help you unless you tell me a little bit more about what is happening. Thanks!
@MrCube6
2 жыл бұрын
Also this build only works on Java edition, bedrock edition, which is mobile, console and windows 10 edition, will not be able to function as bedrock redstone is very different than Java.
@boas7742
2 жыл бұрын
@@MrCube6 it’s odd after one cycle all the stair and blocks end up in the wrong place stairs end up as floor and sticky piston used for a stair
@MrCube6
2 жыл бұрын
Alright so did you power the T Flip-Flop or the contraption itself. You if powered the T Flip-Flop and this happened then your T Flip- Flop is wrong in which case what the tutorial I linked above. If you are directly powering the redstone contraption with a lever and this is happening, then I have absolutely no idea what is wrong. 😁 Make sure you are 1. On Java edition, 2. On 1.16 and above, 3. Have all observers faced the right way, those can be a bit tricky, 4. Follow the tutorials 100%. As of right now I don’t really know what is happening, since it’s all just breaking. But those are the best tips I have. Observer orientation is a big mess up for a lot of people, also the T Flip-Flop is another common error people make. So sorry it’s not working, if you want a different tutorial then I would highly recommend searching this in google: Minecraft 1 wide hidden staircase tutorial. Sorry again hope this helps.
@CoolasIce1888
Жыл бұрын
How do you make the lever to a different place?
@CoolasIce1888
Жыл бұрын
Or making it open from the top and then can be closed at the bottom?
@notz-_-xavier8332
2 жыл бұрын
how do yo connect the lever to your wall :nvm
@TheDevelopmentHive
10 ай бұрын
I tried to have this setup to a redstone torch key, but it completely breaks it. How can I fix this?
@axewe7499
Ай бұрын
Still working in 1.21, nice video btw
@thetrickynicky
2 жыл бұрын
does this work for 1.18.1?
@MrCube6
2 жыл бұрын
Yes it does!
@thetrickynicky
2 жыл бұрын
@@MrCube6 thanks!
@SomethingIsAThing
Жыл бұрын
you didnt show us where to put the other lever
@IT-ServiceEU
Жыл бұрын
Boah that is the very old 1.8 Design .... first showed by MumboJumbo (and recreated later for 1.12+: kzitem.info/news/bejne/umqgvY6CcJmmmYY)
@furiousfate
Жыл бұрын
tysm ! great tutorial. my staircase almost broke xD
@alfonsomartinez4658
2 жыл бұрын
Built how ever it's not working even after complete cycle through
@MrCube6
2 жыл бұрын
Are you building this on bedrock or Java edition, Bedrock edition will not work since this is for java edition only. If you are building this on java edition please be more specific on what is breaking so I can figure out your problem!
@chryswithay8598
8 ай бұрын
10:15 that piston you just placed isn't activated when I placed it and idk what I'm doing wrong.
@erniesshenanigans5748
3 ай бұрын
i did the same thing, i can’t figure it out
@DinoRaptor88
3 ай бұрын
Mine wont work either, it might be because Im on bedrock and not java
@r3mdh
11 ай бұрын
I hate the fact that you do stuff between cuts. Makes it very hard to keep up. 😡
@sirloxitron9155
2 жыл бұрын
Great vid, but mine didn't work I re-watched the video 3 times and it still doesn't work. Otherwise Good vid
@TheSecondComing1207
Жыл бұрын
Thank u. I build this on my hardcore world I got to say it works so well
@XimplGames
19 күн бұрын
one stair case doesnt work 1.20.1
@yu-gg
Ай бұрын
not working again
@TerryBoredom
2 жыл бұрын
a tip from someone whose had to rebuild this 6 times or more) DONT FLICK THE LEVER ON AND OFF QUICKLY!!!!!
@alternateendingsandedits6854
2 жыл бұрын
This works well but for some reason when the steps are done two of the floor blocks are as well and when the stairs are up those two blocks are so I can’t even get down
@theskoob2944
11 ай бұрын
Built it three times now. Works fine after the first two cycles, then the stairs and floor no longer function correctly
@chrisketchum7764
2 жыл бұрын
Does this not work anymore?
@suppp8718
6 ай бұрын
lol at first i forgot the sand stone blocks of the green circuit and it didnt work , but soon i figured it out :D thanks for the tutorial
@JigsawExplains
2 күн бұрын
I like your voice
@greatgamingplays1001
3 жыл бұрын
can you make another version but with a button
@MrCube6
3 жыл бұрын
So im not going to be re-creating this entire contraption with a button but i did create a separate tutorial on how to add a button to your contraptions. I would recommend you watch this: kzitem.info/news/bejne/lWmumGSdnWeIhKQ
@DrxwYhMan
3 жыл бұрын
Idk why it's not working for me, does it not work on console?
@MrCube6
3 жыл бұрын
Unfortunately this doesn’t work for bedrock/console. Search up a 1 wide hidden staircase for bedrock edition. So sorry that you built this and it didn’t work, as I tutorial watcher myself I hated when things didn’t work... so sorry again.
@DrxwYhMan
3 жыл бұрын
@@MrCube6 oh no it's okay I made some differences and i made it work, it's just alot more complicated now
@MrCube6
3 жыл бұрын
Lol well at least it works! Glad u stuck with it.
@koreshroom_
2 жыл бұрын
It went a little bit fast, but after rewinding a few dozen times I got it! Thank you much 🌸🙏
Пікірлер: 300