I show you the simplest way to make a Siamese Rubik's cube mod. Intro Music: "Dusk" by Tobu and Syndec [NCS Release] • Video Outro Music: "Mesmerize" by Tobu [NCS Release] • Video
6:20 This sound is so satisfying and satisfying to watch.
@Yellow434
Жыл бұрын
I think the same
@TheGeckoIsKing
7 жыл бұрын
I just wanted to say that you are the reason why I started cubing! I learned the beginner method in a day and got my record down to 1:35.13 minutes in the same day! I am starting to learn the F2L method! I love your videos! Thank You!
@TheGeckoIsKing
7 жыл бұрын
It is the Fridrich method. I know it as F2L
@MASTERMIND2368
7 жыл бұрын
welcome to cubing! I would wait a little bit before learning the "F2L method" because me being a sub 25 cuber can get times about 50 secs on the begenrs method. I would also recomend learning PLL, 2 look OLL and somtime OLL. If you need any help I am willing to help you!
@TheGeckoIsKing
7 жыл бұрын
Thank You So Much! Where should I start? should I improve my record or learn the different methods first? Thank You!
@MASTERMIND2368
7 жыл бұрын
The short relpy: improve your record untill it ifs around I min. The long relpy: I would recomend first do the beginers method on 3x3 untill you get about 1 min. To get their, you could shave mins worth of time off just by making sure you know the right algs. After that you should learn C-FOP. When you get to around 30 seconds with using 2 look OLL and full PLL, learn difrent methods.
@TheGeckoIsKing
7 жыл бұрын
I have noticed 3-4 ways where i can save a lot of time. I don't have my Rubik's brand 3x3 (because my brother stole it). I will keep practicing! =)
@themcuber2348
7 жыл бұрын
when i saw that the subscribe button was red i was like : " THIS IS MADNESS!"
@kappaogkyle9938
4 жыл бұрын
Yes I did it! It works alright! Nice and good tutorial! Easy construction! Tons of fun! I’ve always wanted a Siamese cube, so why not make it myself? :D thank you very much 🙏
@silaswarner2053
7 жыл бұрын
I already knew how to make this, i just want to be early tbh
@diegov9610
7 жыл бұрын
Ok
@DrakonixYT
7 жыл бұрын
Rip
@Rekusasu827
6 жыл бұрын
rip...
@michaellibovner4173
7 жыл бұрын
Please make a tutorial on how to solve it
@Z3Cubing
7 жыл бұрын
I probably will. :)
@mercergaming3744
7 жыл бұрын
+legoboyz3! sure i also want it .it looks so awesome.. i wiil do it with my 2 cubes..
@jdcuber2412
7 жыл бұрын
+legoboyz3! Please do!
@nickss182
7 жыл бұрын
+Music&Magic Tutorials I buy in euro on ebay
@axelrandm2262
7 жыл бұрын
+Music&Magic Tutorials www.speedcube.nl/epages/78299917.sf/nl_NL/?ObjectPath=/Shops/78299917/Categories ik hoop dat dit helpt :)
@contra2801
7 жыл бұрын
Thanks! I probably won't do this because I don't have 2 good cubes...
@shak9690
6 жыл бұрын
DestructorLXV you can just buy two qiyi sails they are good and they are cheap (Nathan Wilson uses them for his mods)
@oof2768
5 жыл бұрын
they're legit 2 dollars on amazon
@bobbysingh5666
4 жыл бұрын
@@shak9690 should i get the qiyi sails or a yj guanlong for this mod?
@shak9690
4 жыл бұрын
@@bobbysingh5666 qiyi sails are higher quality while the yj guanlongs are cheaper. I would go with the qiyi sails but everything is person to person.
@davidtatem3365
2 жыл бұрын
Very cool! Thank you.
@moppou103
5 жыл бұрын
I’m a kinda new cuber and this mod is awesome and I might order 2 of those cubes to do it
@Chard2134
7 жыл бұрын
I was just watching a quiet JRCuber video and this was the autoplay video.....it shocked me like spider being spotted. BECAUSE OF YOUR LOUD INTRO!!!!
@mrcoolman5557
7 жыл бұрын
Thanks + legoboyz3! The mod worked for me and great job explaining it! The video was easy to understand!
@doktorbarkey
6 жыл бұрын
Cool!!!i'm going to show my friends to watch this video.
@titaniumduck1365
7 жыл бұрын
Nice tutorial! I will be sure to make one of these for myself
@matthewthomson1768
7 жыл бұрын
Your vids r awesome legoboyz3!
@karldamus5124
7 жыл бұрын
Great Video legoboyz3 I really want to make a siamese cube now.
@scerpian6478
7 жыл бұрын
Really? That all you do? AWESOME!!
@Foxbite
7 жыл бұрын
Just a quick question How to do you record your Rubik's cube videos? (The Position of the camera)
@Z3Cubing
7 жыл бұрын
I have a tripod on the floor in front of my chair and against the table. It's a few feet up and is pointing down at the table.
@fattybadger5938
5 жыл бұрын
Love the way he says stickets
@aiasbulljr.9755
6 жыл бұрын
Really good mod
@adamlevine9090
7 жыл бұрын
Ok legoboyz, I am a big fan of yours and have been watching a bunch of your videos. I have one question though, when I superglued the cap I realized that it is probably too loose because my two cubes keep coming apart when they lock up. Is there a way to get the superglued cap off to adjust the tensions?
@Z3Cubing
7 жыл бұрын
It depends on how much glue you used (normally I try to just use a tiny bit), but normally carefully using a knife will work (it takes a while).
@adamlevine9090
7 жыл бұрын
legoboyz3! Ok thank you!
@higgledypiggledycubledy8899
6 жыл бұрын
Should the tensions be tighter than normal for the siamese6 cubes to work well, or are loose tensions ok? I'm asking because obviously once it's glued you can't adjust them anymore...
@Z3Cubing
6 жыл бұрын
You’re not actually glueing anything in the way of the center caps, so you can still adjust the tensions by taking the cube entirely apart. Just keep the cube at a moderate tension that you’re comfortable with using.
@higgledypiggledycubledy8899
6 жыл бұрын
Oh right, I see that now. Awesome, thanks for the reply :)
@pee9070
5 жыл бұрын
6:20 sounds like ping pong balls in a motorized hamster wheel.
@richardbullick7827
4 жыл бұрын
I want a video of you making, scrambling, and solving a chain of 5 Siamese cubes on a time lapse
@ezycubing8039
5 жыл бұрын
Thank you so much!!! I made my own as my first mod and it worked out great!
@xxvictoryxx7723
5 жыл бұрын
great video
@blakeorr7604
7 жыл бұрын
I recommend taking the pieces that you are gluing out and then gluing them, waiting until they are completely dry, then putting the puzzle back together so you don't accidentally glue the wrong pieces
@sillymortalz
6 жыл бұрын
Does it have to be to budget speed cubes or can it be rubiks brand I don’t have 100 speed cubes laying around and the ones I have I am not gonna kill
@cubeartonline8215
7 жыл бұрын
Can you do a Valk GES Mod? (Just an idea that came to mind)
@skydrn9993
6 жыл бұрын
Thank you so Much tomorrow I will buy superglue and make this mod
@LegendaryRadar
7 жыл бұрын
This Looks So cool! I wish I had 2 stickered rubix's Cubes!
@caldezach
7 жыл бұрын
Please don't be a non cuber because you spelled Rubik's cube wrong.
@armaniesqueda893
7 жыл бұрын
Can you use a blow dryer to dry it faster?
@theklown8820
9 ай бұрын
I’m bout to Frankenstein my cubes
@justicesarchives4737
7 жыл бұрын
thankyou
@CubingBeginner
6 жыл бұрын
What grade of sandpaper do you recommend?
@wjrainbow9797
7 жыл бұрын
Is the YJ YuLong, ShengShou Wind, or Legend good for this mod?
@min_808
7 жыл бұрын
Will a Shengshou 3x3 work well?
@JZM006
5 жыл бұрын
Will this work with some stickerless cubes?
@beurioste7797
7 жыл бұрын
nice vid as usual
@beurioste7797
7 жыл бұрын
BTW have you gotten a moyu 2x2 from the cubicle.us
@Z3Cubing
7 жыл бұрын
The only Moyu 2x2 I have is the LingPo, and I either got it from them or from Cubes4Speed.
@beurioste7797
7 жыл бұрын
+legoboyz3! ok I just got a moyu aysu I think that is how it is spelled and wanted to know if you recommend it.
@finndahuman57
5 жыл бұрын
Can i just use school Glue? Like if i want to split them
@xvomitx
5 жыл бұрын
What cubes are you using
@ChristinaJ01126
6 жыл бұрын
Do you have to remove the stickers?
@n7x
4 жыл бұрын
what cubes did you use for this?
@Sprcktz
7 жыл бұрын
can you make a solve tutorial for it
@mdmedrano25
5 жыл бұрын
How many Qiyi Sails do you have?
@AlgyCuber
6 жыл бұрын
can i use a sail?
@jkx9mc
6 жыл бұрын
which cubes did you use?
@armaniesqueda893
7 жыл бұрын
Can you use a blow dryer?
@kidfineful
3 жыл бұрын
Can you make a 2x2x2 please...connected by one corner ?
@quantum.code.x
5 жыл бұрын
Where do you get your sticker peeler
@edubvlogsnmore911
6 жыл бұрын
Sorry I’m late but would a sticker less and stickered work in the same cube?
@Z3Cubing
6 жыл бұрын
Would it work? I guess so. It would look really weird though. :P
@edubvlogsnmore911
6 жыл бұрын
legoboyz3! Wow! I didn’t think you would reply!!! Thanks for replying. I LOVE YOUR CHANNEL!!!
@MrChanceton13
7 жыл бұрын
I know that this video was made a long time ago, but will this work good with stickerless cubes?
@Z3Cubing
7 жыл бұрын
Probably, but it might look weird...
@joeltang3360
7 жыл бұрын
Will stickerless cube (YJ Yulong) effect this mod? i kniw i am a bit late
@Z3Cubing
7 жыл бұрын
I believe it would still work.
@joeltang3360
7 жыл бұрын
+legoboyz3! Thank you bby... Jk... sempai idk
@tommyyyyy9795
7 жыл бұрын
Joel Tang Its "senpai"
@mooser2218
6 жыл бұрын
you think you're late?
@milicevvicv
6 жыл бұрын
Moose R And you think you are late?
@OddityProgidy
7 жыл бұрын
>sees video>gets two cubes>does tutorial>Can't find glue>Uses duct tape>finds glue later>Takes off tape>cube is sticky>Glues cube>core can't move>asked sister for help>She does it well>Takes all credit>repeat
@bermuda333
7 жыл бұрын
would it be possible to do siamese cubes but only connected via corners?
@Z3Cubing
7 жыл бұрын
Yes, a bit more difficult to make though.
@maskedman4982
7 жыл бұрын
hot make make it, take out 3 cubes from the same side in same row, now super glue it to the other 3x3
@hektik5451
6 жыл бұрын
qiyi sail would be a better option tbh but great video
@glassesmatthew7413
7 жыл бұрын
Udo a video on how to solve a Siemise cube
@jasonmuszynski1850
7 жыл бұрын
What brand cube is those?
@TheAverageCuber
6 жыл бұрын
would two cyclone fiewu's work on this project?
@dessnom4333
4 жыл бұрын
I don't think it matters what cube u use
@AlgyCuber
7 жыл бұрын
you can remove pieces on a 3x3x5?
@AlgyCuber
7 жыл бұрын
maybe not
@mooser2218
6 жыл бұрын
what cube(s) should i use to make it
@amaanhussain550
3 жыл бұрын
2 normal 3x3s
@archean432
7 жыл бұрын
Im using cheap mini cubes for this. Gonna make some sweet mini Siamese cubes
@jdcuber2412
7 жыл бұрын
I made it !!
@cedricanims3089
7 жыл бұрын
do it shape shift??
@surrealcam
7 жыл бұрын
What timer do you use on your pc and phone?
@Z3Cubing
7 жыл бұрын
On my phone, I use an app called FiveTimer. It costs a dollar, but the creator of the app gave me a copy of it. On a computer, I use Prisma.
@surrealcam
7 жыл бұрын
+legoboyz3! okay thanks it 5 timer the one thats flat black with white number?
@Z3Cubing
7 жыл бұрын
Rubik's Cube Tutorails And More! Kind of, but I think you're thinking of ChaoTimer.
@myang12003
4 жыл бұрын
Can it shapeshift?
@millenniumedition
Жыл бұрын
what about stickerless cubes?
@gokudoge7588
7 жыл бұрын
How many center pieces are on the finished cube?
@Z3Cubing
7 жыл бұрын
All but 2 of them are showing.
@vahramtchakmakjian2590
6 жыл бұрын
What cubes did you use?
@Z3Cubing
6 жыл бұрын
GuanLong.
@diamonddynamite1557
6 жыл бұрын
when i made this i used the parts you took out and cut them in half and glued the pieces that hold it in the cube together but i didnt have good tools and i made it out of dollar store cubes
@barbrapacatang6416
6 жыл бұрын
What cube is that
@EQW62
6 жыл бұрын
Dude you should make a lego rubix cube.
@dogeyydoge4902
7 жыл бұрын
Is it a bad idea to use 2 different type of 3x3's?
@polymaths55
7 жыл бұрын
As long as they're the same size, it will be fine.
@Crownable
5 ай бұрын
what cube is this?
@juusto6815
7 жыл бұрын
Can I do this with a rubik's brand?
@dattrollr8655
7 жыл бұрын
JSS 2 I'm pretty sure
@juusto6815
7 жыл бұрын
extreme savage 666 Thanks
@dattrollr8655
7 жыл бұрын
JSS 2 do u have the Rubik's brand with tiles or stickers
@juusto6815
7 жыл бұрын
extreme savage 666 Tiles
@dattrollr8655
7 жыл бұрын
JSS 2 maybe but I'm not really sure because it has a ball core and once u break it u can't fix it.
@dogeyydoge4902
7 жыл бұрын
What if the stickers are tiles, do u just take off the tiles?
@danielm9715
7 жыл бұрын
Sand down the tiles so they are equally leveled
@OddityProgidy
7 жыл бұрын
Umm I don't think it will work as well but u can try
@chrisyeager2280
7 жыл бұрын
Isn't there another version where there are a line of 5 like the one Redkb uses
@DivnoorCubes
7 жыл бұрын
Yes, I made one like that.
@antaraislam
7 жыл бұрын
Yea Redkb's one I think only one of the rubiks. Cubes had 3 pieces off and the other one was a whole one
@antaraislam
7 жыл бұрын
Yea Redkb's one I think only one of the rubiks. Cubes had 3 pieces off and the other one was a whole one
@chrisyeager2280
7 жыл бұрын
+Antara Islam ya it one full one and one of its one edge length off
@memememe-ke9yz
4 жыл бұрын
i made mine out of 2 mini 3 by 3s 1 has a keyring so i can put it o my keys and stuff
@camerongertonson9405
7 жыл бұрын
You should make a slim 2x2 mod
@CHASEcancover
7 жыл бұрын
Or red and orange?
@jordansteen8254
7 жыл бұрын
You should do a pyraminx ao5 without the ball bearings for a challenge
@wallbant928
7 жыл бұрын
I have a moyu without ball bearings and it's pretty nice, but he shouldn't do it because it's going to be a huge pain to put back. besides, he might lose some springs or bbs
@jordansteen8254
7 жыл бұрын
+Ryan M. Cho True. But if he's up for it. I did it with my shengshou and it wasn't too bad too put them back.
@wallbant928
7 жыл бұрын
I guess. I replaced my shengshou springs with the softer moyu and it's nice and all but it's hard to take apart at first
@tim1ver170
7 жыл бұрын
Legoboyz3, is it fully functional?
@emsleywyatt3400
3 жыл бұрын
Programmed in multiple techniques.
@nickblackmore8833
7 жыл бұрын
Will this work with mini cubes
@Z3Cubing
7 жыл бұрын
It should, yes.
@nickblackmore8833
7 жыл бұрын
Ok
@aviationandrailroad6792
7 жыл бұрын
can you do a checkerboard pattern.
@bobbysingh5666
4 жыл бұрын
did u figure it out?
@aliciapearcy1450
6 жыл бұрын
6:18 LMAO
@celery4805
7 жыл бұрын
can I use normal glue?
@Z3Cubing
7 жыл бұрын
Any kind of super glue or expoy should probably work.
@weirdsquidward2055
7 жыл бұрын
legoboyz3! What kind of cubes are those that is all I want to know
@cuberstache
7 жыл бұрын
He said in the video. Watch till the end before you ask questions like this. They're Guanlongs.
@weirdsquidward2055
7 жыл бұрын
k i think i went and told my dad about how too make these before i watched the whole video
@dentonle2217
7 жыл бұрын
Sadly a youtuber had to cut off his hands today. A Cubing youtuber named Legoboyz3 was doing a mod. During the mod it used super glue. But he accidently not knowingly and stupidly glued his hands onto the 2 Rubix cubes (spelled wrong because thats what non-cubers would say). She oh i ment he will always live on as an amazing Egg solver.
@gummehbear2876
7 жыл бұрын
ok
@dogeyydoge4902
7 жыл бұрын
What XD , I don't know if this is hate or just bullshiz (gotta keep it clean cause it's a cubbing channel guys)
@idolotsofstuff7524
7 жыл бұрын
+Dogeyy Doge he is an obvious troll
@OddityProgidy
7 жыл бұрын
Hahaha
@Z3Cubing
7 жыл бұрын
I wasn't working on a mod, but once I had some liquid superglue that came out really fast and I accidentally glued my whole hand to a piece of wood. I had to sand down the surface of my fingers after that to get it off.
@amelia_c1750
7 жыл бұрын
Can I use regular glue?
@Z3Cubing
7 жыл бұрын
Not sure what you mean by "regular," but I would only use superglue or some sort of epoxy that works with plastic.
@amelia_c1750
7 жыл бұрын
legoboyz3! I mean like Elmers glue people use at school and stuff.
@Z3Cubing
7 жыл бұрын
Then no.
@cubexc1825
7 жыл бұрын
Unfortunately, I have no idea where to get the brand of cube used here, and a Rubik's brand won't work, it has a track which won't let me put two together.
@slimygreengoop301
7 жыл бұрын
Now do it with Valks, Gans 356 Air UMs, Wei Long GTS2s, etc.
@TesseractCubing
5 ай бұрын
How do I make a 1x1x3 siamesed cube?
@Taggy1011
Жыл бұрын
I'm going to do it with those terrible 50¢ party favors wish me luck!
@levistogsdill638
7 жыл бұрын
could you link the void together?
@Z3Cubing
7 жыл бұрын
I still have yet to take one of those puzzles apart...
@levistogsdill638
7 жыл бұрын
they are pretty hard to take apart
@polymaths55
7 жыл бұрын
RedKB linked them but I think it's harder than this mod
@levistogsdill638
7 жыл бұрын
yeah
@aar5n
7 жыл бұрын
Were you the first person to make the Siamese cube
@carcaf9134
7 жыл бұрын
What cubes r those
@Z3Cubing
7 жыл бұрын
GuanLongs.
@calvin9905
7 жыл бұрын
Will hot glue work
@Z3Cubing
7 жыл бұрын
No, it would probably come apart really easily. I would at least use superglue, if not then some sort of epoxy.
@randymiller1199
7 жыл бұрын
What type of cubes
@Z3Cubing
7 жыл бұрын
I used GuanLongs.
@masterofcubes5540
7 жыл бұрын
Try with QiYi Warrior or SS Legend....
@domscoots7458
6 жыл бұрын
What cube are those
@elbudda4678
6 жыл бұрын
DomScoots guanlong
@sevenb4time601
7 жыл бұрын
You also want to make sure your tensions are right
Пікірлер: 341