I first made two of these a couple years back and I was new to wood working and had trouble finding the boards of the right thicknesses, but the two caddies I made were GREATLY appreciated. I have got my wood ready, and this time I made a template for the pieces to make sure the angle is good & the curve at the top looks right. I have decided to use dowel rod rather than the galvanized pipe, though the pipe does give it a really nice look. I decided on the one side to use a single large quarter inch thick board which I will paint with the chalk board paint rather than 2 smaller boards. This make it easier to put retirement, happy birthday, promotion messages on it. The other side I will still use two boards because it gives it a very classy look. I pre-fit everything to see that I cut all boards square and to measurement, then sanded them. I stained all the wood the first time with the special walnut and it really gave a quality look. I have used poplar wood for the second batch and I do not think I will stain it since I picked up some leftover Halloween themed bottle openers that look like black skulls. I think they will give a nice touch for 50/60 year birthday, and retirement presents. The black opener on the white wood will be a nice accent. If you want to give the wood the feel of fine furniture, put two coats of spar varnish with sanding after each coat dries. You can upsell your quality by explaining the difference of spar varnish in case your cold bottles sweat or it happens to rain on your pic nic. I, personally, have found that with wood that looks like and feels like quality furniture, these caddies can be perfect for where a group of people want to each chip in $10 for Old Joe's going away, or a raffle at the Loyal Order of Kangaroo Lodge. Again, this will blow away the Etsy $Twenty something knock offs. Most guys will not buy this for themselves, but it make a great gift and you can price it at a range fits what a lot of groups are looking to spend. You can display it with expensive imported beers (use empties), so people realize you have made something really fine.
@MikeTheSith200
2 жыл бұрын
second beer tote video ive watched in a row with the same music as Off The Ranch. lol. Great video and Ryobi FTW
@danmills9130
8 жыл бұрын
Great idea. Being from central Nebraska I spend lots of time in the garage making things and watching the Huskers. Looks like my next project. Thanks. GO BIG RED
@DIYPETE
8 жыл бұрын
+Dan Mills Thanks Dan. Hopefully we have a better season this year! Cheers and GOOOO BIG RED!
@theSZ73
8 жыл бұрын
cool maysurements
@DIYPETE
8 жыл бұрын
Haha, guess my Dakotan accent comes out sometimes, cheers!!
@regigilchrist362
9 жыл бұрын
Love this! I may take on this project for a Christmas gift for my husband, who brews his own beer. He's also a die-hard Husker fan. GBR!!!
@DIYPETE
9 жыл бұрын
+Regi Gilchrist That's awesome Regi! Thanks for taking the time to check out the project and GBR!
@alexanderthebeast8855
4 жыл бұрын
Regi Gilchrist did you end up doing it?
@jaxxed12
7 жыл бұрын
I saw this video and it's gave me the perfect present idea for my dad, will be getting what I need this weekend to get myself started. Cheers Pete !
@DIYPETE
7 жыл бұрын
Hi Jack! Awesome! Yeah it will make a great gift and your dad will love it :) Cheers!
@MichaelMeis33
9 жыл бұрын
i like the handle... a lot easier than some of the other options out there and still looks awesome
@DIYPETE
9 жыл бұрын
+Michael Meis (tubbz23) Thanks Michael! Yeah I was walking around the store and the idea for using pipe seemed like it would be fun to try. I'm glad I did! Thanks :)
@billssimplepinedesign8878
8 жыл бұрын
Great project video as usual. The great background doesn't hurt either. What a beautiful place. I enjoy the scenery.
@DIYPETE
8 жыл бұрын
+Bill Rolfe Thanks Bill, yeah it's not a bad spot to film. Cheers!
@augmentedleather5432
5 жыл бұрын
I love DIY beer caddies, so much better than the cardboard that they sold in. Nice project! I made mine from leather.
@DIYPETE
5 жыл бұрын
Cool, i bet the leather one turned out amazing!
@TheRealElDiablo
9 жыл бұрын
Once again Pete another simple but badass build. Ya gotta respect that adult beverage! I'm not a Nebraska fan I am a Notre Dame fan. I will however wish your team does well.
@petesveen
9 жыл бұрын
+joe brown Hey Joe! Thanks for saying hi! I'm a big college football fan as well :) And wish Notre Dame a good year for ya. Cheers!
@josephjetton273
7 жыл бұрын
Off the topic, but just wanted to say that I lived in Montana for a year. I worked on the Yellow Tail dam and lived in Ft. Smith. I loved my time there and someday plan to move back.
@DIYPETE
7 жыл бұрын
Hey Joseph! Very cool, yeah Montana is definitely a nice place. Cheers!
@fabricioqui
7 жыл бұрын
Hey Pete! Just downloaded the plans! Will send u picture when I'm done with it! Thanks again for being one of my favourites in the community!
@DIYPETE
7 жыл бұрын
Cheers! Hope the project goes well for you!
@spencer4t
8 жыл бұрын
Nebraska guy here....I will definitely be building this in preparation for football season!
@DIYPETE
8 жыл бұрын
+Spencer Hansen Thanks Spencer, GO BIG RED!
@Retroweld
9 жыл бұрын
Cool Pete. Very old school. I love it. Douglas
@DIYPETE
9 жыл бұрын
+RetroWeld Thanks Douglas!
@mammothfilms
5 жыл бұрын
Chalkboard paint is a great idea.
@nathanp8247
9 жыл бұрын
Very nice project! Will have to make.
@DIYPETE
9 жыл бұрын
+nathan p Thanks Nathan! Have fun with the project!
@VinnieC262
9 жыл бұрын
Another Awesome project Pete for those End of the Summer blues...Great job my friend
@DIYPETE
9 жыл бұрын
+Vinnie C Thanks!
@19hilljacob
6 жыл бұрын
GO BIG RED!! Love the shirt. Keep up the great work👍🏻
@DIYPETE
6 жыл бұрын
Thanks Jacob! Go BIG RED and can't wait for Scott Frost to lead this year!!!
@diannaramirez1985
3 жыл бұрын
Thanks for that great idea going 2 have 2 make one for Christmas gift 👍🤗🍻
@DIYPETE
3 жыл бұрын
Have fun!
@sithlordst32
6 жыл бұрын
Excellent job! I will make mine to carry 12 Canadian beers EH!
@DIYPETE
6 жыл бұрын
Love it!!
@chandelirious
3 жыл бұрын
Love it! Downloading the plans so I can make some for me and my pals. Cheers!
@DIYPETE
3 жыл бұрын
Have fun!
@mvrick123
8 жыл бұрын
Amazing video i wish all diy videos were like this! Keep up the good work pete! GBR!!!
@DIYPETE
8 жыл бұрын
+Maverick Williams Thanks Maverick, and I really appreciate you taking the time to watch the project videos and comment. GBR!
@JUDDLILIHA
9 жыл бұрын
You da man Pete....
@El_Aridarium
6 жыл бұрын
Cool, very nice and fast instructions, thanks!
@DIYPETE
6 жыл бұрын
Thanks!
@kurtmurf
9 жыл бұрын
I like it. Just found my next project.
@petesveen
9 жыл бұрын
+kurt murphy Awesome!
@KBBAKTHA
8 жыл бұрын
WOW, very nice. Thanks for sharing. Cheers.
@DIYPETE
8 жыл бұрын
Thanks for watching Bakthavathsal!
@wagnerluis764
6 жыл бұрын
Hi, man...What a nice project...I will try to make one...Congratulations!!!
@DIYPETE
6 жыл бұрын
Have fun with the project Wagner!
@1972piledriver
6 жыл бұрын
Great video, I'll customise it by stencilling a Welsh dragon on the side , I may get a chance to use it on the one day of sunshine we get here in Wales lol
@DIYPETE
6 жыл бұрын
That's great Dai! Have fun!
@mikesaylors9498
6 жыл бұрын
Thanks for the plans. Someone is getting a manly Christmas present
@DIYPETE
6 жыл бұрын
Awesome!
@marinaldocanela6974
7 жыл бұрын
muito bom gostei .. parabéns.. mais um like com as duas mãos.. kkkkkk sucesso irmão..
@DIYPETE
7 жыл бұрын
obrigado
@1cgower
6 жыл бұрын
great idea thanks
@DIYPETE
6 жыл бұрын
Thanks for watching!
@big_zzzzz
9 жыл бұрын
great video, Pete!
@DIYPETE
8 жыл бұрын
+Zack Howell Thanks Zack!
@deounb
9 жыл бұрын
Cheers!
@DIYPETE
9 жыл бұрын
+deounb Back at ya!
@titowambuch1080
9 жыл бұрын
cool project
@DIYPETE
9 жыл бұрын
+Tito Wambuch Thanks Tito!
@josiebailey-dawson1042
3 жыл бұрын
Hi there I’m trying to download the pattern for the beer caddy but it says invalid link Is there another option?
@ChrisMuncy
9 жыл бұрын
Fantastic project Pete! It's on my list of items to make, thanks :-)
@petesveen
9 жыл бұрын
+Chris Muncy Very cool, thanks Chris!
@dmoss8928
9 жыл бұрын
Love the videos... Esp love the pallet projects!
@DIYPETE
9 жыл бұрын
+David Moss Thanks David! You been building some fun pallet projects lately??!!
@dmoss8928
9 жыл бұрын
Yea I made a entry way table and chevron coffee table... You got plans for any videos with pallets?
@PaperCraneWishes
8 жыл бұрын
go big red man!
@DIYPETE
8 жыл бұрын
+Amy Baker GBR! Thanks for commenting, Amy. Cheers
@brzyd4l
8 жыл бұрын
Awesome!
@DIYPETE
8 жыл бұрын
+brzyd4l Thanks!
@lespin9893
7 жыл бұрын
Amazing video!
@DIYPETE
7 жыл бұрын
Cheers! Thank You!
@ThePlatont
8 жыл бұрын
pete great work. think about building something to improve the little bridge an the start of the video. I believe it would be very interesting.
@DIYPETE
8 жыл бұрын
+ThePlatont Thanks for the comment! Yeah there could definitely be some cool additions. Cheers!
@jayhalfmoonfarm8094
9 жыл бұрын
GO BIG RED
@DIYPETE
9 жыл бұрын
+Ascoolone Heck yeah!
@davidhanks9679
9 жыл бұрын
Nice Project
@DIYPETE
9 жыл бұрын
+david hanks Thanks David!
@DavidBishopinc
9 жыл бұрын
Great video.
@DIYPETE
9 жыл бұрын
+David Bishop Thanks David and I appreciate you taking the time to watch it! Cheers - Pete
@SAEtaylor
9 жыл бұрын
Nice! Too bad about those stains you got on the front of your new project. Maybe we can get you a KU sticker to cover that up...... Keep up the good work!
@DIYPETE
9 жыл бұрын
+SAEtaylor haha! I'd only call it a stain if it said rock chalk jayhawks on it. j/k - cheers man! Thanks for stopping by!
@SAEtaylor
9 жыл бұрын
Ha ha touche!
@RonSchotz
4 жыл бұрын
Put a 2nd coat of poly where the chalk board paint goes. It will seal up the edges of the tape so the chalk board paint will not swap under it.
@DIYPETE
3 жыл бұрын
Thanks!
@summerswoodworking
9 жыл бұрын
Very nice bro!
@DIYPETE
9 жыл бұрын
+Summers Woodworking Thanks so much!
@915Mang
9 жыл бұрын
Great project, nice video man!
@DIYPETE
9 жыл бұрын
+915Mang Thanks!
@WoodFrontier
6 жыл бұрын
Nice work. I'm hoping to get a couple of these done before xmas. Trout slayer was my go-to beer for quite some time. Unfortunately now I'm out of state and only Moose Drool makes it over. (Sometimes summer honey) -Todd
@DIYPETE
6 жыл бұрын
Hey Todd! Good to hear from ya, have fun with the build! Moose Drool and summer honey are both some of my favorites as well. Cheers!
@NotonlyWood
9 жыл бұрын
cool project i have to build it for my father
@DIYPETE
9 жыл бұрын
+Mathias Hoyt Thanks Mathias! You'll have to make one, your dad would love it!
@NotonlyWood
9 жыл бұрын
+DIY PETE yes i also think so cheers from germany
@DIYPETE
9 жыл бұрын
+Mathias Hoyt All the way from Germany, that's awesome! Cheers back at ya!
@MikeStan
8 жыл бұрын
Would the bottles sit in the holder if you used 1/2 x 6 pieces? I know it's actually a little smaller than 6 inches but would save time/money buying the 6 inch planks
@capnbobretired
3 жыл бұрын
Its more expensive but you can get hardwoods of 1/4 by various widths at Menards.
@fabuloso7176
6 жыл бұрын
U the man
@DIYPETE
6 жыл бұрын
Thanks for watching!
@ConsummateSportsman
9 жыл бұрын
Loved the video, Pete! The drone was a nice touch too. Forget the Huskers, go Spartans! ;-)
@DIYPETE
9 жыл бұрын
+The Consummate Sportsman Thanks! Glad Football season is back! Cheers, - Pete
@DIYPETE
9 жыл бұрын
+The Consummate Sportsman You have an awesome channel by the way! Saw your pheasant adventure out in Montana!
@ConsummateSportsman
9 жыл бұрын
+DIY PETE Thank you! My brother lives in Helena, so I try to make it out that way as often as possible!
@StreekDime
7 жыл бұрын
Hey Pete - Thanks for all the great videos. I have been binge watching your videos which has encouraged me to take up some woodworking projects around the house. I'm an absolute novice with no experience but looking forward to building some great things with the help of your videos and extensive guides on your website. I had one quick question - I am trying to determine when it's best to use nails vs. screws. Is there a reason you went for nails on this project instead of screws? Do you a simple rule-of-thumb you follow when determine which to use for the project?
@DIYPETE
7 жыл бұрын
Hi Sunny, so glad that you have been inspired to get making!! In general if I am working with smaller/thinner pieces of wood, using nails reduces the risk of splitting. Screws also tend to give stronger joints as they actually draw two pieces together, so if strength is needed, I would use screws. Cheers!
@HomebookPL
9 жыл бұрын
Cool! :)
@DIYPETE
9 жыл бұрын
+Homebook.pl Thanks!
@brandonmiller7584
8 жыл бұрын
Any idea where I can find 1/2" x 8" poplar boards? Neither Home Depot nor Lowes seem to carry it in my location (Wichita, KS).
@capnbobretired
3 жыл бұрын
Try Menard's. Its where I finally found mine.
@TheShavingWoodWorkshop
9 жыл бұрын
Great version of this tote - Are you sponsored by Ryobi or Home Depot ?
@DIYPETE
9 жыл бұрын
+The ShavingWood Workshop Thanks for taking the time to stop by and to check out the project. I appreciate it! I am part of team Ryobi , and they are exclusive to Home Depot :) Cheers!
@TatumMarie0403
5 жыл бұрын
Hey I’m doing this as a project for woods class and I was wondering how you got the sections that split up the beers to stay?
@DIYPETE
5 жыл бұрын
Hi, they are fairly loose so you can pull the out easily and it can be used for other things. But I would cut a small shallow groove in the base for each piece to stay in place better next time.
@CrossCutCreations
7 жыл бұрын
Hey! I love this design and was looking for the lumber to make a beer caddy. I found the 1/4" material, but the widest 1/2" broad I can find is 1/2x6. I went to 2 Home Depots and looked online. I can't seem to find the 1/2x8 anywhere. Suggestions?
@DIYPETE
7 жыл бұрын
Hi Robert! hmm... you could use 3/4 if you had to and could make some slight adjustments to make it work. It would be a bit more beefy but would work. You could look into using 1/2 inch plywood. Otherwise you would need to use a planer or find a local lumber yard who might have more of a variety. I found mine in a a section with poplar, pine, oak etc in project size pieces. I'm guessing they must not have a section like that at every store unfortunately. Anyways, let me know if any of that helps. Good luck!
@CrossCutCreations
7 жыл бұрын
DIY PETE Hey Pete! I decided to go to Home Depot and get a 1x8. I ripped the board to 6 inches, then cross cut it to 4 feet and then decided to resaw the piece so I had a half inch and quarter inch piece. This was a little more labor intensive, but it wasn't too bad at all. It's an alternative for those who can't seem to find half inch poplar. Thanks again for your help. I really appreciate your project videos!
@johncoonradtjr.5141
5 жыл бұрын
How much would you charge for one
@ryanjones5606
3 жыл бұрын
I am desperately trying to make this as a Christmas gift, I downloaded the plans, but what size screws did you use for the bottle opener? I was thinking 3/8” long? Any help would be greatly appreciated, I love the content!
@DIYPETE
3 жыл бұрын
Sorry for the delay, hope you were able to finish the project in time! I believe it was 3/8".
@ryanjones5606
3 жыл бұрын
@@DIYPETE got it done, thanks!
@BOBBERtheKID
7 жыл бұрын
Montanas 4 Nebraska? Must be cats fan.....Either way good work!
@DIYPETE
7 жыл бұрын
Hey! Well I'm mostly a Huskers fan since that is where I went to school, but for Montana schools I am a Cats fan over the Grizzlies :) haha , cheers man!
@ICanProbablyDoThat
8 жыл бұрын
I just posted my own video of a caddy that I loosely based off of your design. Thanks for sharing your project. And by the way, your video is way more to the point than mine was; I gotta work on that. :P
@DIYPETE
8 жыл бұрын
+I Can Probably Do That Great video! I just checked it out, and the beer caddy turned out awesome. Keep up the good work!
@rafaelcabreramarquez1389
6 жыл бұрын
where i can buy that bottle opener?
@DIYPETE
6 жыл бұрын
Hey Rafael! They sell them at my local home Depot. Otherwise, Amazon has them as well: amzn.to/2hUlzRX ( affiliate link) Cheers!
@rc1145
6 жыл бұрын
Where do you see a Y in the word measure? Other then that loved the video bud.
@DIYPETE
6 жыл бұрын
Hi! It's an accent thing :) We say a few words a bit different where I grew up then most parts of the country. Cheers! ( Lots of Long A's --- like bag, rag, tag sound more like bayg, tayg , etc. haha, cheers!
@hankthomas4584
6 жыл бұрын
Wath song ?
@TheRealElDiablo
9 жыл бұрын
Pete, if you were to sell these how much would you charge? I have been thinking about changing careers. I own a window and door co. I recently was in a really bad car accident my neck and back need to be operated on. I have nerve damage in both and also in my one arm. My Dr advised me that I may never be the same again and may want to think about changing what I do for a living. I first thought I could keep my company just hire subs. The problem with that is I can not find anyone that works like me. Cares about what they are doing like I do. I install doors that cost anywhere from $500.00 to $17,000.00. I installed Allen Iversons door when he was with 76'rs. I am ranked #20 out of 35,900+ window and door company's in the state of PA. So walking away from it is killing me because I love what I do. However knowing my limitations is wise. So I really think I am gonna turn my garage into a workshop. I am gonna sell at flea markets and online. So that is why I want to pick your brain on what you think something like this would sell for. I mean I could see ya charging 45 to 50 for that. Your farm table being solid wood I think like 600 to 700 for it would be cheap. Am I off base? I plan on making band saw boxes and spice racks.... copper garden sinks with work stations.... I am in the infancy or researching prices on materials and tools. I have mostly everything. Just missing a band saw drill press and lathe. Thank you for you time Kind regards joe
@DIYPETE
9 жыл бұрын
+joe brown Hey Joe! Thanks for reaching out and for taking the time to stop by. Scott (who is on the DIYPETE team) - has sold them at farmer's markets in the $55 range and found success. Could you copy and paste this message and send an email through the contact page? www.diypete.com/contact/ -- That way I can help go a little more in-depth on a couple ideas. Cheers, - Pete
@Uncle_Buzz
9 жыл бұрын
Somebody got a DJI for his DIY !!
@DIYPETE
9 жыл бұрын
+Cactus Makeshop I've been wanting one to shoot some cool footage for a long time and finally pulled the trigger and got one :) Absolutely love it. It is so fun, and easy to fly too! Do you have a DJI?! Cheers - Pete
@Uncle_Buzz
9 жыл бұрын
No, but I'm a fan. Maybe someday.
@jimnicoll6459
9 жыл бұрын
Looks great, but could do with being 3times larger.lol
@petesveen
9 жыл бұрын
+James Jospeh Nicoll Ha! Love it!
@DoAndBrewDIY
7 жыл бұрын
Great project and video Pete! I subscribed to your channel long ago. I built a Beer Caddy similar to yours - but added a chiller - check it out on my channel when you get a chance! Thumbs up!!!
@DIYPETE
7 жыл бұрын
Hey Brady! Thanks a bunch for subscribing man. I appreciate it. I will definitely check out your channel, and nice work! Cheers - Pete
Пікірлер: 143