Followed this step by step. But no I’m stuck with a MPERFORMANCE Infiniti
@kevinkev1530
4 жыл бұрын
Lmao!!!!!!
@canteenpapi3040
3 жыл бұрын
lmaoooooooooooooooooooooooooooo
@srizulu
4 жыл бұрын
My next life I want to be born as your car
@dmitryclarke2127
4 жыл бұрын
I love your editing. It’d relaxing and hilarious
@raphaelsanchez4797
4 жыл бұрын
I have watched hundreds, if not thousands, of "How To" videos online and this is probably the best one as far as instruction: 1) straight to the point; 2) easy to follow steps shown in video; 3) no endless chattering about this, that, and the other. Other people should take lessons from you. Congratulations and thank you for doing this video.
@MrGtownjake
2 жыл бұрын
Agreed 110% Wish they were all like this.
@이찬형-c4h
3 жыл бұрын
엄지척 입니다. ^_^ G바디 부속을 구해서 보내드려야 카본제품이 아닌 카본작품 (Masterpiece of carbon fiber )을 창조(?)가 맞는 표현이실듯...~~
@Albert87nl
4 жыл бұрын
Came for carbin fiber door sill....... seen plastic with. carbon logo... ..Ehh. okay. xD but dont get me wrong excelent work. and awesome method. but i really came for a full Sill out of carbon xD
@ECOLAPStudio
4 жыл бұрын
Hello, Buddy! I am preparing various carbon fiber parts videos. If I get a chance, I'll make the full carbon fiber door sill. Thanks for watching.
@안성탕면-y2r
3 жыл бұрын
이분은 재료 집어던질때 젤 멋있음.. 멋지십니다!!
@s.7472
4 жыл бұрын
재료이름이나 설명 한국어로도 잘 알수있게 했으면 더 좋겠습니다. 저도 이런쪽으로 관심이있지만...생각으로 끝이나네요...지식도 없구요 ㅎㅎ 영상은 정말 잘보고있습니다. 감사합니다.
@EnryGarage
4 жыл бұрын
Too good 😍 Greetings from Italy🇮🇹
@ECOLAPStudio
4 жыл бұрын
Hello, Buddy! Thank you so much. I'm will make a fun and informative video. Stay tuned to my channel. Thank you for watching.
@BacktoTrack33
4 жыл бұрын
I looks great and maybe it's better than the ture M stuff. But plz be carefull with the Brand rights of M Performance because you Upload this Videos ( proof for them) there is a little chance that somebody will sue you. I dont think this will happen but there some crazy people and dont sell it then they bust your ass. But amazing work and a wing would be nice to see but maybe its to big to do it. Cheers
@ECOLAPStudio
4 жыл бұрын
Hello, Buddy! Thank you very much for your advice. I do not sell this parts. I just made it for my use. Also, I don't sell any carbon fiber. It is my hobby and I study and test carbon fiber by myself. I want to share my knowledge with people. I'm will make a fun and informative video. Stay tuned to my channel. Thank you for watching.
@stefankamerling
3 жыл бұрын
I think your vids are really nice!! I love all the carbon fiber parts you make for your bmw. I own a bmw f30 328i (2014)! Could you make some Carboon fiber eye lids? (It would make a nice video). I would love a nice pair!!!!
@gforcekaras
4 жыл бұрын
You are, what's the word, awesome. Love the editing style!
@mjojrjr6231
4 жыл бұрын
Now I understand why it's expensive to buy one...🙌
@patacanman
4 жыл бұрын
Can you make the same piece but with the procedure like the one you made the forged carbon table? Or it would be too thick. Thank you. I love your videos
@schnookieshullHull
4 жыл бұрын
allot of work but the outcome is perfection... I would do the same but maybe with m4 logo if possible. but this looks brilliant..
@mlinecomposites1
4 жыл бұрын
Don’t want to sound mean but he did too many extra steps, there’s a more simple way to have done this For such a simple piece it doesn’t take a lot of work
Mate, you made awesome contents...I'm looking to make them, where can I find the "Mperformance" stickers? I searched on the web, but nothing find.
@ECOLAPStudio
4 жыл бұрын
Hello, Buddy! The sticker was made by my friend. I asked a friend to make a video. I'm Sorry I couldn't help
@vranastudio1882
4 жыл бұрын
thats real carbon fiber
@ПростоЧувак-ц6г
2 жыл бұрын
I don’t skip advertisements on your videos. Many thanks for your work 😉✌️🇺🇦
@roguber
4 жыл бұрын
Thank you very much for your videos. Thanks to you I am going to start working a couple of things on my audi rs5. I hope I can show you when they are finished.
@ultralinx200
4 жыл бұрын
Ahahaha nice edit on polishing process! Like it EDIT: TIME TO CELEBRATE THE 1K !!!!!!!!!!!
@ECOLAPStudio
4 жыл бұрын
Hello, Buddy! Yeah!! 1K subscribers!! I am very grateful to my subscribers, including you. Thank you so much!
@juanrendon3639
4 жыл бұрын
Nice video. Was wondering how thick is the acrylic sheet you have to make it?
@HelpMeDIY
4 жыл бұрын
Great tutorial and it came out great! Only issue is they you just downgraded your M4 to the lower tier M Performance 😆
@DC_DC_DC_DC
4 жыл бұрын
We all know that since the early 2000's that makes no difference lol
@dyingbreedministry
4 жыл бұрын
You are a master 🏆 I work with fibreglass and am looking into working with carbon fibre
안녕하세요! 당연히 에폭시와 경화제는 카본에 사용할 수 없는 것들도 있습니다. 저 같은 경우에는 적층과 성형에는 엔폭시사의 에폭시, 그리고 마감으로는 리졸텍사의 에폭시를 보통 사용하고 있습니다. ^^
@upjun76
4 жыл бұрын
올려주시는 영상 항상 재밌게 보고 있습니다. 개인적으로는 무광카본에 관심이 많아.. 비엠 신형키 뒷판에 테스트겸 몇번의 시도 끝에 나름 만족할 만한 결과물 얻었습니다.. 카본원사에 에폭시를 1회만 올려주고(붓질을 최대한 결방향으로) 경화후 건프라에 쓰는 무광클리어를 올려주니 육안상으로나 질감 측면에서 순정파츠와 매우 유사한 결과물을 얻었습니다. 기회가 되시면 제대로된 솜씨 한번 보여주세요. ^^
@ECOLAPStudio
4 жыл бұрын
안녕하세요!! 이 전에 말씀하는 것 도전하셨군요!! 대단하십니다. 저도 용준님과 비슷한 방법으로 구상을 하고 있습니다. 저도 도전해봐야하는데 요즘 본업 때문에 시간을 쪼개기가 쉽지가 않습니다ㅠ 조만간 도전해보겠습니다! 좋은 정보 감사합니다~ ^^
@MindDezign
4 жыл бұрын
WOW............... WHY ?????? Which took longer, making them. Or editing this video ( which is well done !) Why on Earth would you do this much work and spend so much money in materials alone. For two strips of carbon covered by a sticker. Would had been far better to carbon wrap the entire kick plate and vacuum bagged it.
You're just adding weight. Which defeats the whole purpose of carbon fibre...
@jmcadvertising
4 жыл бұрын
ediannn..muasooookkk..👍
@황태환-u9k
3 жыл бұрын
좋은정보감사합니다 혹시 지금쓰신 카본원단 종류와 구입처 좀 알수있을까요?
@XavierAncarno
4 жыл бұрын
Love how you toss shit constantly
@ECOLAPStudio
4 жыл бұрын
Hello, Buddy! I'm going to make a fun and informative video. Stay tuned for the next video! Thank you for watching.
@금은방이선생
4 жыл бұрын
우와!! 기다리던 영상이 업로드!!! 천명축하드려요🙋♀️
@ECOLAPStudio
4 жыл бұрын
감사합니다!! 5개월이라는 기나긴 시간이었습니다ㅋㅋ 앞으로 더 열심히 하겠습니다. 금은방이선생 화이팅! 에코랩 스튜디오 화이팅~ ^^
@jakefriesenjake
4 жыл бұрын
False title. It should of read : DIY carbon fiber "inserts" with logo, taped to stock door sils. Looks great tho....
@Andy-Andeee
4 жыл бұрын
False Comment. It should read: Awesome DIY, thanks!
@ukracer7593
4 жыл бұрын
So basically you bought some door sills and replaced the aluminium logo with a bit of carbon fibre and a vinyl sticker? Not really making a carbon fibre door sill now is it?
@syakuyumiko2012
4 жыл бұрын
すごいです。
@b1ejc
4 жыл бұрын
Unlock iphone > youtube app > subscriptions > Eco-lap studio video appears.... SMASH THAT PLAY BUTTON!! awesome video, clean content and you make it look so easy!!! Cant wait for next video
@ECOLAPStudio
4 жыл бұрын
Hello, Buddy! I really realy appreciate. I got a lot of power in your comment. I will work harder and make videos. Thank you. Please look forward to the next video!
@토마토체리
4 жыл бұрын
국산차중에도 저런식으로된차들 가능할수도있겠군요
@ECOLAPStudio
4 жыл бұрын
안녕하세요~ 비슷한 형태라면 어떤 것이든 가능합니다 ^^ 시청해주셔서 감사합니다.
@gjkrisa
4 жыл бұрын
Are you using gas heat because the electric heat gun blows to much air?
@ECOLAPStudio
4 жыл бұрын
Hello, Buddy! That's right The electric heat gun is too strong. And it is too hot, which can damage carbon and epoxy resin.
@gjkrisa
4 жыл бұрын
@@ECOLAPStudio right on didn't know it could hurt the carbon I used a hot air gun recently on some reason and though it was pretty cool how it removed the bubbles that are to small to show on camera but definitely would hurt the clear look.
@mlinecomposites1
4 жыл бұрын
Gregory Krisa OMG 😱 Bro it does not damage carbon fiber with a heat gun, it might over cure the resin. Carbon fiber is created to withstand up to 2000 degrees of heat!! How in the world is a heat gun going to damage the carbon🤦🏾♂️
@dwk163
4 жыл бұрын
뭔가 마음이 안정되네연.. 좋아요 박고 튑니다
@kitestandel8659
4 жыл бұрын
can you make captain America shield using carbon fibre?
Great work, but instead of the double-sided tape, use Panel bond. It will be permanent.
@thomas.234
4 жыл бұрын
J’adore vos vidéos ! Très bon travail ! Je suis débutant dans le domaine et ça m’aide beaucoup ! Merci 💪🏻
@cf1799
4 жыл бұрын
Are they for sale and if so how much $
@ECOLAPStudio
4 жыл бұрын
Hello, Buddy! I am not a carbon fiber seller. I study carbon fiber myself and do various tests. My knowledge may not be perfect, but I would like to share my knowledge with many people.
@JoseFlores-uy2nx
4 жыл бұрын
This reminds me Alcatraz, so much work to get it done..
@iuliantall997
4 жыл бұрын
KZitem should implement a haha reaction! This reminds me of How to Basic's videos, only the fact that you don't use eggs 😁
@vilawyer9388
4 жыл бұрын
V.L.0771 🤓👌 nice video ... 🤔Thanks
@이슈-l3j
3 жыл бұрын
히팅건인지 저거 구매처좀 알수잇을까요?
@Cliffracer46
4 жыл бұрын
Amazing! Good job. Will do the same to my bmw
@ECOLAPStudio
4 жыл бұрын
Hello, Buddy! I hope your work goes well. If you have any questions, please comment or email me. I will tell you what I know. Thank you for watching.
@yocchi9829
4 жыл бұрын
いちいち雑なの笑う
@Andili76
2 жыл бұрын
Your Videos are really good, thx 4 sharing!
@punkuk1979
3 жыл бұрын
Do let the first top coat cure before laying down the second?
@joomong67
4 жыл бұрын
금손~!!!!
@djremotion2
4 жыл бұрын
Visual carbon is cancer of the time. It needs to be structrural.
@MadelnOahu
3 жыл бұрын
I need scissors like that. They on Amazon?
@llRaZzLeDaZzLell
4 жыл бұрын
Can you wrap your entire car carbon?
@ECOLAPStudio
4 жыл бұрын
Hello, Buddy! I can't make the entire car carbon fiber. It need a large space to do that, but I'm working at home. T.T
@christophoroslivadiotis1703
4 жыл бұрын
Yo from where are you buying the carbon fiber cloth? BTW excellent job
@ECOLAPStudio
4 жыл бұрын
Hello, Buddy! I bought materials from a Korean online shop. However, Korean online shops do not ship overseas. So I'm going to show you an online shop in the UK. Maybe you can find what you want. www.easycomposites.co.uk/
@dinamicpictures9516
3 жыл бұрын
After using the brush with which it is rinsed and allowed to dry?
@bogue2077
4 жыл бұрын
영상이 조용하다보니 잠이 솔솔오네요..ㅋㅋ
@TheFicosa69
4 жыл бұрын
Grande... fai veramente dei bei lavori, complimenti
@_janjaowtf
4 жыл бұрын
Wow very well
@tomspalding8977
4 жыл бұрын
A good one for you to do with your beamer would be the seat backs and seat base plastics in carbon!
Hello, Buddy! Thank you for your comment. Please look forward to next video. I will make fun and informative video. Thank you for watching.
@jinback3790
4 жыл бұрын
정말 대박!!! 사용하시는 제료 그리고 섞는 비율등 조금더 디테일하게 영상 만들어주심 좋을것 같습니다
@jagergerg9771
4 жыл бұрын
Holy shit that looks great
@서시우-n3w
4 жыл бұрын
저두 m4 인데 가지고 싶어요
@GoToKeN1234
4 жыл бұрын
物を作る人で、道具を雑に扱う人はキライ
@bessekhaeriah2038
4 жыл бұрын
hello wanna ask.. Is it necessary to wait epoxy resin to get tacky first before stick carbon fiber cloth? Because what i see in your video after you put epoxy resin on the glass you directly just stick carbon cloth
@ECOLAPStudio
4 жыл бұрын
Hello, Buddy! Don't wait for it to be sticky. Apply epoxy resin to the glass plate and immediately layer the carbon fiber cloth. It is most important to remove the air bubble using a brush.
@TraficMusic
4 жыл бұрын
i love the "how to basic" vibe, great carbon work too !
@jakubrysz3287
4 жыл бұрын
i thounght about same HOW TO BASIC and thats so funny and educational
@bigbear1845
4 жыл бұрын
기가 막히네요
@98976h
4 жыл бұрын
how much hp it gives you that logo?
@justmusic63
3 жыл бұрын
Un lien pour trouver la fibre, l’époxy etc ?
@Whyeezy
3 жыл бұрын
엠퍼포먼스스티커는 어디서 구매하셨을까요? 퀄리티가 좋네요 ㅜ
@ECOLAPStudio
3 жыл бұрын
안녕하세요. 스티커는 3색 로고는 실사출력 나머지 글씨 부분은 시트지입니다. 지인분 소개로 스티커 주문해서 사용했습니다.
@Super6ix06
4 жыл бұрын
Love that I can learn something and get a laugh out at times..I will be trying this. Good job.
@robertortega32
4 жыл бұрын
Nice job
@DavidVadeby
4 жыл бұрын
Looks sick! Would be great tho if you could link all the items and products used!
@ECOLAPStudio
4 жыл бұрын
Hello, Buddy! I'm buying carbon fiber and epoxy resin from online shop in South Korea. However, Korean online shops do not ship overseas. So I introduce you UK online shop. Maybe you can find what you want. I hope you helpful. www.easycomposites.co.uk
@sungillestlee63
4 жыл бұрын
손재주가 대단하시네요!!
@pku0412
4 жыл бұрын
장비도 몇가지 더 사용하시고 완성도가 점점 높아지네요.👍
@ECOLAPStudio
4 жыл бұрын
안녕하세요!! 아직 많이 부족합니다. 이 놈의 카본이 하면 할 수록 욕심도 많이나고 참 묘한 매력을 가진 거 같습니다ㅋㅋ 앞으로 더 열심히 카본, 그리고 영상 만들겠습니다. 좋게 봐주셔서 감사합니다~^^
@용짱-c6u
4 жыл бұрын
내것도 해주삼
@ivanrvaltierra
3 жыл бұрын
Mejor lo compro en Aliexpress 🤣
@shafkatshehzad8464
4 жыл бұрын
pls help... i read that as ''IMPERFORMANCE''
@shukryghany
2 жыл бұрын
Hi there. Love your videos! I learnt a lot from you. Thank you for the awesome tutorials. I have a question though. How do you clean the remaining epoxy on the acrylic/glass board after you take the thing out? A scraper?
@grb318
4 жыл бұрын
4к ????
@전진-q5b
4 жыл бұрын
전 c쿠페인데 제 차로 머 해보고 싶으신거 있으시다면 머든 협조하고 싶어요 ㅠㅠㅠ
@ramonangeldelaguilaruiz4029
4 жыл бұрын
Why not making the full sill ?
@gjkrisa
4 жыл бұрын
Is it possible to just use the uv resin to add a bubble look to the carbon piece or does it thin out too much when dries?
@ECOLAPStudio
4 жыл бұрын
Hello, Buddy! The epoxy resins I use are products that can easily remove air bubbles. I've been trying to get rid of air bubbles, and I haven't tried making air bubbles. Making an air bubble can be done by mixing a high viscosity epoxy resin and curing it at a temperature. This is my guess.
@gjkrisa
4 жыл бұрын
@@ECOLAPStudio bubble or dome look
@msamurai2k
4 жыл бұрын
wow
@canteenpapi3040
3 жыл бұрын
This is one of the sexiest carbon fiber DIYs ive ever seen! Please make a list of all the products you used in this video please!! i want to do this too
@hawks008
4 жыл бұрын
도대체 뭐 하시는 양반이실까 ㅋㅋㅋ 손재주도 보통이 아니시고 작업 도구도 전문가 수준이고 평범한 직장인이라고 얘기하시는데 좋은말로 할때 솔직히 정체를 얘기안하시믄 잡으러 갑니다잉 ㅋㅋㅋ
@ECOLAPStudio
4 жыл бұрын
안녕하세요. 그냥 자동차와 카본 그리고 DIY를 좋아하는 사람입니다. 장비욕심이 있어서 이것저것 장비들이 매우 늘어나고 있네요;;;;
@hwh2178
3 жыл бұрын
이거 판매도하시나요?
@marcialkutschera8974
3 жыл бұрын
@Eco-Lap Studio - How do you clean the glass plate the best after use ?
@ECOLAPStudio
3 жыл бұрын
Hello friend That is simple. The fully cured carbon fiber will release very cleanly from the glass plate. And you can wipe it with acetone. But, if some epoxy resin remains, it can be removed by blade of utility knife.
@kenfldude
4 жыл бұрын
Nice work!
@syahrixky3927
4 жыл бұрын
Please become my housemate
@cesarcarazocalderon7136
3 жыл бұрын
Hi, friend !! I follow your channel and I love it !! One question, to get a matte finish, how do I do it? Thank you very much and greetings from Jerez la Frontera. Spain
Пікірлер: 318