Hi, i bought the rfid props and when i try to connect a mag lock on the NC pins of the relay, the green light of the relay is flashing and it doesnt open... When a unplug the mag lock, the relay works normally.
@FrightProps
5 жыл бұрын
Hi Michael. You probable need to install a diode. See this doc - www.frightprops.com/faq/content/19/275/en/activating-a-magnetic-lock-from-a-rfid-relay.html
@JamesMiller-us4yx
6 жыл бұрын
Say. Are the little relays necessary between the RFID unit and the Escape Keeper or can you wire the RFID directly into the EK? Thanks, great video by the way!
@andrewcurrier1776
7 жыл бұрын
For resetting the puzzle, do you need to press the reset button or is there a remote button that can be used. I assume with this control board you need to always hit the reset button on the controller to reset the puzzle, but how would that work if you have the controller locked or hidden away in the room?
@FrightProps
7 жыл бұрын
You can install a wired reset button (or use a wireless remote with relays) to reset the puzzle. You could also use the Auto Reset feature of the controller, but the pieces do have to be removed before the unit will reset.
@RussCavenderJustRuss
7 жыл бұрын
I'm using an Escapekeeper in input sequence mode. My mag lock is getting hot and doesn't seem to be as powerful as normal... could this be a amperage problem? I'm using the power supply that came with the EK.
@FrightProps
7 жыл бұрын
Hi Russ, Amperage shouldn't be an issue. It could be a problem with the magnetic lock. Also I have heard of some people experiencing issues if they are not using the lock plate that came withe lock or if the alignment between the lock and the plate is off. Send us an e-mail at sales@frightprops.com if you need further assistance. Thanks!
@mikerichett4683
7 жыл бұрын
Is the sound quality in the video as good as it gets? For example if a CD sound track played would it sound better?
@mattsimmons
7 жыл бұрын
If just wanting a simple action like unlocking a maglock is there a reason to use the EscapeKeeper vs just grounding the maglock through the NC of all the relays?
@FrightProps
7 жыл бұрын
Hi Matt. Yes, the benefit of the EscapeKeeper is you can specify an order that the triggers need to be activated in (as well as many other features). The "bonus footage" at the end of the video shows off some of that and we'll have a video up shortly running through all the capabilities and benefits of using an EscapeKeeper.
@mattsimmons
7 жыл бұрын
Yeah. We just got in an Escape Keeper Jr and 3 of your RFID sensors but now we are wondering if we should use just the 3 RFID sensors to the maglock since we don't care about specific order just that the 3 items are correct, seems to be a waste of the Escape Keeper at that point if we can re-purpose it for something else.
@FrightProps
7 жыл бұрын
Sure, that does make sense. If you don't care about the order, or don't want specific sounds to play when objects are placed (or something like that) you can just wire up through the relays and use the EscapeKeeper somewhere else.
@mattsimmons
7 жыл бұрын
Thanks, making sure I wasn't crazy. And thanks for the great video :)
@christinacampbell1634
6 жыл бұрын
How did you connect the magnetic lock to the escapekeeper?
@marianavm640
7 жыл бұрын
Hi, can you do a video of how to make puzzles for Kids?
Пікірлер: 15