A Question on Beaded Sheets Printed Fabric Templates
@DazDroAnimations
Ай бұрын
This might be better than doing a full Deadpool mask because the mouth can move
@Thrashdirtbikes
Ай бұрын
Although that is cool you don’t really get the full Deadpool look with it
@DazDroAnimations
Ай бұрын
@@Thrashdirtbikes I think it’s his face shape, they should have something attached to you face the copys the movements of your jaw onto an extended part of the mask to keep shape
@christianmccauley7340
Ай бұрын
Yeah but you need a Giga chin to make it look normal, which is always the issue
@DazDroAnimations
Ай бұрын
@@christianmccauley7340 I have the giga chin 🗿
@dr.iron_bat_prime2.0
4 ай бұрын
That’s actually cool and creative, I would really like to see a full look and tutorial on your Deadpool suit.
@nickalaniz1509
2 ай бұрын
Where did you get the fabric?
@Mewingvenom
Ай бұрын
My guess is jo-Anne’s or hobby lobby. They have pretty much all of your fabric needs
@emm1893
2 ай бұрын
Awesome video and super creative to build off of someone else's template like this! Do the seams have to be double top stitches or do you think it would work just with the first zigzag stitch?
@CaptainCosplay
2 ай бұрын
The regular zigzag stitch will definitely still work, but you’ll have to figure out what to do with the seam allowance, as it may show through when stretched over the shell.
@DumPixels
2 ай бұрын
@@CaptainCosplayWhat fabric did you use
@thethreemusketeers7711
Ай бұрын
Can you give me the link to the mesh eyes you used
@CaptainCosplay
Ай бұрын
I have another video on my channel going over how I chose the material for the eyes. I don’t have a specific product I can link, so I recommend giving it a watch!
@ag.r4544
3 ай бұрын
hola , una ultima consulta en que porcentaje lo imprimo ya que es una sola hoja , al 100% ?? . gracias
@CaptainCosplay
3 ай бұрын
You’ll want to print it in Poster mode, so that it breaks up into multiple sheets when printed. 100% fits my head (24 inches) plus the face shell on top.
@ELv839
27 күн бұрын
Hi, I was wondering how thick is the foam you used for the half shell? Can you tell me in millimetres pls? Thanks
@CaptainCosplay
27 күн бұрын
I used 5mm foam!
@ELv839
27 күн бұрын
@@CaptainCosplay thanks, also does the face shell feel comfortable when the fabric is pulled over it? Like does it feel bulky or anything?
@CartonArteYProps
3 ай бұрын
Hola . En qué tamaño de hoja lo imprimo las plantillas
@CaptainCosplay
3 ай бұрын
US Letter, 8.5x11. But regardless of paper size, make sure you’re paying attention to the scale percentage when you print.
@ELv839
13 күн бұрын
wait so do i print the halfshell template 5% smaller or normal size?
@CaptainCosplay
9 күн бұрын
It’s dependent on your head measurement, and how you would scale the pattern based on Greg’s recommendations (included with the template). So if his guidelines recommend 100% for your head size, I would print it at 95% to make a half shell. My head is 24 inches, and I used 105% for the full, and normal (100%) for the half.
@ELv839
9 күн бұрын
@@CaptainCosplay and say if my face shell is 95%, do i print the fabric at 100%?
@haleyperkins2180
10 күн бұрын
what type of foam are you using?
@CaptainCosplay
9 күн бұрын
5mm Eva foam
@marcomaluf
2 ай бұрын
How thick is the foam?
@ELv839
27 күн бұрын
I think it might be 5mm but I don't really know
@marcomaluf
26 күн бұрын
@@ELv839 Thank you! 🙏
@ELv839
26 күн бұрын
@@marcomaluf no problem
@mosqueira
2 ай бұрын
Hola, cual es el material que usas para hacer el faceshell? porcierto buen video
@Day9294_
2 ай бұрын
Se llama Eva foam
@jeffstark4488
24 күн бұрын
❗❗What about template Sizing? Please reply ❗❗
@CaptainCosplay
9 күн бұрын
Greg’s template includes a guide for sizing, and you can follow my recommendation about shrinking it by 5% for the half shell. Simply match the scale of the fabric pattern to the scale you choose for the foam pattern.
@Dudepool.Official
8 күн бұрын
Awesome Job Trail.. keep up the great content ❤🖤✊
@LeonielSoriano
Ай бұрын
Did you actually stick the fabric on the shell? If so, what did you use? Thanks!
@CaptainCosplay
Ай бұрын
I did not, I wanted the fabric mask to be removable. If you want to glue yours, I recommend a spray adhesive of some kind!
@_MandoCalrissian
Ай бұрын
@@CaptainCosplaywhat fabric
@ieatricemc14
Ай бұрын
do you think it'd be possible to do like a 3/4, where the shell goes down to the jaw, but don't cover the mouth? that way it avoids the extremely prominent cheekbones?
@ieatricemc14
Ай бұрын
similar to Batman's cowl, minus the chin strap, that way you can still see your mouth moving
@CaptainCosplay
Ай бұрын
Possibly! You’d still run the risk of the fabric stretching over that edge and revealing the line. It seems to simply be a challenge of using EVA foam, but the only way to find out would be to try it!
@judeephraimherradura7054
4 ай бұрын
do you have the templates for the face shell?
@CaptainCosplay
4 ай бұрын
You can find them on Greg Enriquez’s channel. He’ll have a link to his Etsy store. I put a link to his tutorial in the description.
@laminate31
Ай бұрын
The templates are free btw I’m making a mask from his template
@judeephraimherradura7054
Ай бұрын
@@laminate31 thanks man👍
@tresordelamer
Ай бұрын
this is really good! how comfortable is breathing? i ordered a lady deadpool costume and i'm a little concerned about airflow in the mask.
@hugooctaviowestmiller4347
2 ай бұрын
nice video.
@AbrakadaBaris
Ай бұрын
Like your dedication and time you put in this mask, but tbh it looks very goofy
Пікірлер: 49