Burke Makes Stuff'' love your frame I plan on making some soon awesome channel Brother thanks for the share its a Great idea and it will save me some coin ! New sub here for keeps!!💖😱✌🎨🖼
@BurkeMakesStuff
5 жыл бұрын
Foltz Art I’m glad you enjoyed it! Welcome to the crew!
@amgoodw
Жыл бұрын
@BurkeMakesStuff do you think you could make a video on how to make your own frame for canvas paintings? Please advise 🙏 ❤🙏🙏🙏🙏😊💛⭐️🌟
@billcostello8430
Жыл бұрын
My wife does some painting on canvass and I was trying to figure out the best way to frame them, this is definitely the best way I have seen, far better than the idea I had. Thanks for sharing.
@BurkeMakesStuff
Жыл бұрын
I’m glad you found it helpful! Fee free to share it with her painter friends! I’ve had a LOT of artists reach out and say the same.
@Mimi91719
2 ай бұрын
@@BurkeMakesStuff I just found your channel and this is the first video I have watched of yours. I am a 53 year old woman who has been an acrylic artist for almost 30 years now and knowing what I know about the cost of professional framing (😳) was more than enough to compel me to want to make my own frames! My first frame turned out great and I felt good enough about doing the miters on the corners that I decided to get my router out with a rabbet bit to make this next frame a bit more professional. I have only used the router once. Prayerfully, and with the help of your videos, I can make something really nice 🙏🏼 After all of this rambling I really only commented to tell you what a beautiful job you did on that painting!! I used to teach at a wine and canvas studio and I would have never guessed you did it at a paint party! Seriously...that painting is gorgeous!! So thank you for sharing your painting as well as your woodworking skills 😊 I pray you have a blessed rest of your day!
@BurkeMakesStuff
2 ай бұрын
@@Mimi91719 thank you so much! I’m glad you found value in the video!!!
@jayzrat
3 жыл бұрын
I really like your video. Of all the DIY frame tutorials, yours is the best in simplifying the procedures, especially in using tools like the mitre box. All of the other videos explain use the mitre saws and band saws which I do not have. They always say its easy to make your own, but forget that not everyone has these machines available, nor the space for them.
@BurkeMakesStuff
3 жыл бұрын
Absolutely true! That was my motivation for making this one. I’m so glad it helped get you the info you needed!
@BurkeMakesStuff
3 жыл бұрын
Well on a normal day, I’d definitely use my miter saw for this, but I figured that people might not have one, so last minute I switched to the liter box. Glad I could help!
@nmmlo
3 ай бұрын
Awesome! thanks for sharing your tips and craftsmanship. Your video is an inspiration so I cannot wait to try this myself with a cheap but beautiful canvas my wife bought a few days ago.
@BurkeMakesStuff
3 ай бұрын
Awesome! Thank you!
@deonaeddy7749
Жыл бұрын
I've watched lots of videos on this and got confused each time. You explain it so good and thank you. You rock!
@BurkeMakesStuff
Жыл бұрын
Happy to help!
@87easybreezy
9 ай бұрын
Hallelujah!!!! I needed this video!
@BurkeMakesStuff
8 ай бұрын
Glad to help!
@jude1515
8 ай бұрын
Great looking frame.
@BurkeMakesStuff
8 ай бұрын
Ty
@BurkeMakesStuff
8 ай бұрын
Thanks!
@dontaylor1041
Жыл бұрын
Great job on the canvas thank you for adding the extra on the width and the length I had to figure that out for myself, because nobody tells you. My wife and I also glue puzzles to frame so I had to add an extra quarter of an inch on each side at each end it took me a while to figure that out too. Thanks
@aimeemaschhoff7998
2 жыл бұрын
This is absolutely the best tutorial I’ve seen for this. Thank you so much! I need to frame my art and now feel confident doing so.
@BurkeMakesStuff
2 жыл бұрын
I’m so glad!! Rock out!
@ds74878
5 ай бұрын
I don't understand how the painting has space to give the floating effect with the measurements you took. Am I missing something?
@BurkeMakesStuff
4 ай бұрын
Yes, AND I forgot to say something in the video. The measurements INCLUDE the spaces in the math. Hard to explain after the fact, but one of the measurements that deals with the angled cut includes the variance for the space.
@aarontate1861
3 жыл бұрын
I’ve made a few of these now for my paintings, but use pallet wood, no cost for the wood 🪵😁
@BurkeMakesStuff
3 жыл бұрын
Free is perfect!
@thestaz8564
3 жыл бұрын
love the jaws painting :D
@roseolmstead16
4 жыл бұрын
This was incredibly helpful. Thank you!
@themotivationalmuseum
3 жыл бұрын
Kristen's! Hey! So I'm building a museum/gallery in the inner city. I was wondering if you can paint me some original pieces, I can pay $100 a piece for nice size pieces. I'm trying to give back to my community. Let me know.
@kimcavagna2082
Жыл бұрын
I love this tutorial! Thank you so much
@BurkeMakesStuff
Жыл бұрын
Glad I could help!
@ds74878
11 ай бұрын
The painting looks like it belongs in a Wes Anderson movie. Thanks for the video!
@BurkeMakesStuff
11 ай бұрын
My pleasure
@sammykobayashisan
Жыл бұрын
Thank you so much. You just saved me a ton of money!
@BurkeMakesStuff
Жыл бұрын
That’s my goal!
@warrenfernandes9256
4 жыл бұрын
This is a great video. My wife asked me to do a similar project for her paintings. What kind of wood did you use and where did you get it from? I'm a total noob and this will be my first wood working project. Any and all help with a list of materials would be much appreciated. Thanks.
@viviantsai8444
3 жыл бұрын
I’m using pine wood, known as common wood in Home Depot. It’s cheap and light, and durable for indoor use. The type of mounting hardware you’d need would be d-rings and a hanging wire so that you can hang it on the wall.
@kentburk4493
Жыл бұрын
What size was the wood?
@TheNatureExperience1
3 жыл бұрын
I’m looking to make my own! I love this!
@BurkeMakesStuff
3 жыл бұрын
I’m so glad that you found it helpful! Thank you for checking it out!
@1995Benzo
Жыл бұрын
Yo, this was exactly what I needed! Liked and Subbed 🙏
@BurkeMakesStuff
Жыл бұрын
Glad I could help!
@jancie202
8 ай бұрын
Just what i needed!
@BurkeMakesStuff
8 ай бұрын
Glad to help!
@astranger4763
5 жыл бұрын
Nice painting 🖼 10 times better than what I draw
@BurkeMakesStuff
5 жыл бұрын
A Stranger do you paint?
@jayzrat
3 жыл бұрын
You indicated that the frame is 3/4” thick, but how wide? It looks to be 1-1/2”, correct. And for the screws, what size and length. Guessing flatheads?
@BurkeMakesStuff
10 ай бұрын
Yes. I believe it’s 1.5”
@superkel110180
5 жыл бұрын
My cousin made a frame around their mounted flat screen tv. That way it looked more artsy in their room.
@BurkeMakesStuff
5 жыл бұрын
Kelly Soto awesome idea! I just watched a video of a guy taking the tv in his kid’s playroom and building a giant Nintendo switch around it as if the tv screen were the switch screen. Loved it!
@grahamcaspian6293
3 жыл бұрын
pro tip : watch movies at Flixzone. Me and my gf have been using it for watching lots of of movies lately.
@miloroyce2797
3 жыл бұрын
@Graham Caspian Yea, have been using flixzone} for since november myself =)
@jacerayan4457
3 жыл бұрын
@Graham Caspian yup, been watching on flixzone} for since november myself =)
@sebastianmiller9101
3 жыл бұрын
@Graham Caspian definitely, I have been using Flixzone} for years myself =)
@pisastero
3 жыл бұрын
I tried to make this frame, but in the end, found that my painting was just a smidge too big/my frame was a smidge too small. To have that floating look, should you add another 1/8 or 1/4 of an inch to the outside dimension?
@BurkeMakesStuff
3 жыл бұрын
You could, but that should happen automatically if you follow what I did in the video, because when I have you add the thickness of the framing material, we then cut it at a 45 degree angle. Doing that should add about 1/8 of an inch. Because the addition of the thickness would be if we were cutting it at a 90 degree angle. But if it didn’t work for you, def add a bit.
@j.little4235
Жыл бұрын
I was wondering how you ended up with that slight gap. Now it makes sense.
@samalmonte8060
4 жыл бұрын
This is Genius! I want to do this for my all my canvas painting because do far framing artwork for my family as a gift is getting more and more expensive as they keep asking for bigger pieces. My last commercial floating frame was a 30x40 canvas and it was $200. Would you add a list of the materials you used in the video description?. Thanks!!
@xx_naasson_xx
4 жыл бұрын
I was hoping he'd list the materials too, but he only lists the tools used to make the video. Lol
@BurkeMakesStuff
3 жыл бұрын
No problem! Glad to save you the money!!!! I’m all about keeping profits as high as you can!
@calisnake62
3 жыл бұрын
Can you share links to purchase the strap with the angles?
@BurkeMakesStuff
Жыл бұрын
Hi! The video description has JUST been updated to include all of the items used in this video. I'm sorry for not having them up before. Here is the one for the Band Clamp: amzn.to/44Y6Uvl
@ronnieorchid499
2 жыл бұрын
This was a great video. Thanks!
@BurkeMakesStuff
2 жыл бұрын
I’m so glad you found value in it!
@pinkywittingslow4055
2 жыл бұрын
Fantastic! Thank you!
@BurkeMakesStuff
2 жыл бұрын
You’re welcome
@TRICO-WANDER
3 жыл бұрын
You have a small gap around the painting creating the floating effect - did you allow for that gap in your measurements? Or did that appear after measuring accurately the specific dimensions of the painting? Cheers, great video 👍
@BurkeMakesStuff
3 жыл бұрын
I left the gap BECAUSE of the floating effect. Lol
@TRICO-WANDER
3 жыл бұрын
@@BurkeMakesStuff thats cool, but doesn't really answer the question 🤣 when you were measuring up did you add on an extra 5mm each side or something?
@BurkeMakesStuff
3 жыл бұрын
@@TRICO-WANDER yes and no. It was planned for, but not added. This may be a liittle hard to explain in writing. When I explained that to get the outside measurement for the frame, you add the thickness of the wood that’s accurate if we made 90 degree cuts, but we used the miterbox to make 45 degree cuts instead. That 45 degree cuts is slightly longer than the thickness of the wood simply because they are 45 degree cuts. That difference is what shows up in the final product as the gap around the painting. It’s hard to explain, but as long as people are trying to make a floating frame, and follow what I did in the video, it comes out right. 😆
@keithhollingsworth4989
Жыл бұрын
The 45 degree cut doesn’t alter the thickness of the wood! 🤦♂️
@blakeduris2347
Жыл бұрын
Imma use this for my project, I’d say tho paint the edges haha
@blakeduris2347
Жыл бұрын
Thank you for the tutorial
@BurkeMakesStuff
Жыл бұрын
You’re extremely welcome
@dsrcvideos
7 ай бұрын
Love the frame! How much space do you allow between the artwork and the frame? And do you add that to the overall dimensions eg. 21 1/2” becomes 21 3/4”?
@BurkeMakesStuff
7 ай бұрын
the space is factored into the measurements i give in the video. i didn't explain that very clearly, but it all works out.
@comepaintwithme6575
4 жыл бұрын
Thank you so much this was so helpful ♥︎:)
@BurkeMakesStuff
4 жыл бұрын
I’m glad it helped!
@kimcavagna2082
Жыл бұрын
Where do you buy a clamp set up like that to hold the boards in place after glueing?
@BurkeMakesStuff
Жыл бұрын
Home Depot. It’s called a band clamp. Love it!
@amgoodw
Жыл бұрын
Can you post the links to the tools you used to make the frame so I could order the tools for myself, your help would be greatly appreciated ⭐️🌟✨️😊🙏😀
@BurkeMakesStuff
Жыл бұрын
Hi! The video description has JUST been updated to include all of the items used in this video. I'm sorry for not having them up before. Here is the one for the Band Clamp: amzn.to/44Y6Uvl
@amgoodw
Жыл бұрын
@@BurkeMakesStuff brilliant many thanks 😊 ⭐️✨️🌟😊😊👍🙌
@jamesfox3478
Жыл бұрын
Hey Burke. I love your vids and I’m an artist and I am going by your DIY float frame but I have a problem I’m using an old frame for a 16 x 20 painting I have finished. But the 20 x 16 canvas same brand I’m using as a template. Doesn’t seem to fit. Is the canvas off? Should I only go off measurements from the canvas that is going to accept that particular frame. Any help on this I would really appreciate it thank you very much!
@BurkeMakesStuff
Жыл бұрын
Hey man. Do you mean based on the frame I made?
@bethstageart
8 ай бұрын
Must include expansion gaps in your measurements
@BurkeMakesStuff
8 ай бұрын
For the frame? No. There won’t be any expansion… but if you mean for the gap itself, that is included in the fact that the way I explain the diagonal cuts, it that creates the gap, though I didn’t discuss it, it’s factored in.
@rozhalldotcom
Жыл бұрын
This is a great video - thanks for posting. Especially liked the strap clamp! Didn't even know such thing existed!
It’s called a band clamp. You can get them at any hardware or big box store. Love em!
@DR-tv9lg
2 жыл бұрын
Hi. I love this method. Seems doable but wondering if you think gluing it would be enough for a larger frame? Do you think it would hold up with the additional weight? For a 36" x 48" canvas?
@monalee7687
Жыл бұрын
I was wondering the same thing. Did you try this method on a big canvas? How did it go?
@BurkeMakesStuff
Жыл бұрын
Try it. I really don't know. depends on the wood, how accurate the cuts are. Its
@johnnormandie694
2 жыл бұрын
If you made the frame exact and then why is the painting floating? It would be tight therefore you probably should make the frame 3/8 of an inch larger than the painting?
@BurkeMakesStuff
2 жыл бұрын
Actually the math to make it bigger to “float” is already factored into the cuts I talk you through. No need to add
@frederir7
2 жыл бұрын
Nice frame! My wife asked me to make something like this and your video will save the day. Can you help me understand the measurements to make it "float" inside the frame? It looks like you cut the width, for example, to 17.5". If the pic is 16" wide and the frame sides are .75" (so 17.5" total), how is there still room to float? Seems like it'd be a tight fit. Thanks for the help!
@ChiomaObiako
Жыл бұрын
What kind of wood did you use to make the frame?
@BurkeMakesStuff
11 ай бұрын
I think it’s just pine for this one, but I’ve done them with poplar and walnut often.
@jimdimitrios1
2 жыл бұрын
why am i overthinking my frames? i glue them, run finishing nails into them also. your right, glue should be good, its not really a functional object. maybe i am being overcritical, but the gaps on the miteres really bother me. are they really noticable to you, or am i being overly critical? ive been spending hours making frames, sanding, filling, etc. thx for video
@BurkeMakesStuff
2 жыл бұрын
Miters are I Portent only if the error is noticeable. I’ve been to plenty of art museums where the frames are atrocious, so I’m not overly concerned, as long as they match up pretty well. You can also use wood filler after they are made to make them 100%, if it really drives you nuts
@jimdimitrios1
2 жыл бұрын
@@BurkeMakesStuff thx!
@Bethdeditter
Жыл бұрын
Nice and simple than you
@BurkeMakesStuff
Жыл бұрын
You’re very welcome!
@cricketkajunoon
2 жыл бұрын
Hello, I want to try this but the canvas I have is just a canvas itself. It’s not on the frame. How can I create a frame for the canvas alone? Thanks
@BurkeMakesStuff
2 жыл бұрын
Not sure. But there MUST be a video on it out there somewhere.
@BurkeMakesStuff
2 жыл бұрын
Not sure. But there MUST be a video on it out there somewhere.
@cricketkajunoon
2 жыл бұрын
@@BurkeMakesStuff thanks
@rduff1999
2 жыл бұрын
Cricket you would need to mount the canvas to a backer board of Masonite or thin birch plywood. Seal ALL sides and edges with Golden's GAC 100. Two coats min, then using a pva acid free glue attach the canvas. Then you can use the floating frame.
@jackiemarren8387
3 жыл бұрын
I am wondering where in the canvas you put the screws?..Did you attach something to the canvas first?
@BurkeMakesStuff
3 жыл бұрын
The canvas already is on a “stretcher” it how the canvas is mounted when you buy it. The added pieces to the frame I made were screwed directly into the “stretcher” portion.
@jackiemarren8387
3 жыл бұрын
@@BurkeMakesStuff For canvasses not on a stretcher(but stuck on to board ) what would you suggest?
@BurkeMakesStuff
3 жыл бұрын
@@jackiemarren8387 if two board is thick, this process should still work fine. If the board is thin however, it won’t because there’s nowhere to be able to use screws without going through the board. In that case, I’d make the main frame the same way, but instead of attaching the secondary pieces to the main frame, I’d cut what’s called a rabbet into the backside of each of the 4 sides of the frame before attaching them. I’d make it so that when put together the rabbet around the back of the frame would be the size (sliiiiightly larger actually) than the board with the canvas. Then insert tot board, and use what are called metal “points” to keep the board in place. This is very hard to explain in words, but I hope It helps
@jackiemarren8387
3 жыл бұрын
@@BurkeMakesStuff I have an idea what you mean. I checked out what a rabet is. Thanks a lot for your help. !
@jackiemarren8387
3 жыл бұрын
A rabbet
@jackiwannapaint
Жыл бұрын
yes but if the canvas is 16 x 20 and the inside dimensions of thr frame is 16 by 20 that leaves zero clearance between frame and canvas and eliminates the "floating" effect--the fractional space between frame and canvas--no?
@BurkeMakesStuff
11 ай бұрын
Have addressed this in other posts. The spacing is built in, based on the angle of the cuts. I explain it in depth somewhere in this thread.
@AdemKae
6 ай бұрын
I love that you've repurposed the hand weight with a new role rather it staring at you from afar 😂💀
@tigizarts1105
2 жыл бұрын
Please what's the name of the clamps you used?
@BurkeMakesStuff
2 жыл бұрын
It’s called a “band clamp.”
@kbdefay
2 жыл бұрын
What was your source for the clamping band?
@BurkeMakesStuff
Жыл бұрын
Home Depot. You can get them at any hardware store, or online. This one is good. amzn.to/3FJyqBR
@M.Shepardbee
3 жыл бұрын
Measure corner to corner (x) to see if its square.
@BurkeMakesStuff
3 жыл бұрын
Yup. I do that instinctually! What do you make?
@amandapanda45
3 жыл бұрын
What size wood do you use?
@BurkeMakesStuff
3 жыл бұрын
I believe it was 1.5”x.75”
@beckytaul4355
4 жыл бұрын
Thank you what is the clamp called
@BurkeMakesStuff
4 жыл бұрын
Becky Taul that one is the DEWALT 15 ft. 1000 lbs. Band Camp with nylon strap.
@survivinglife101
4 жыл бұрын
What type of wood do you buy from Home Depot?
@BurkeMakesStuff
4 жыл бұрын
As little as possible. Lol. The issue with ANY wood from Home Depot is quality. Make sure to check EVERY PIECE you want o get from them because I’d say roughly 60% have issues even in the more expensive, “better quality” stuff.
@survivinglife101
4 жыл бұрын
Burke Makes Stuff thanks for your reply, so where do I get quality wood?
@BurkeMakesStuff
4 жыл бұрын
BoyMeetsGyal local suppliers. Hit the internet and look in your area. Where are you located?
@survivinglife101
4 жыл бұрын
Burke Makes Stuff wow I didn’t consider other alternatives to Home Depot or Lowe’s , I’m in Cincinnati, OH
@BurkeMakesStuff
4 жыл бұрын
@@survivinglife101 i don't know they cincinnati market, but i haven't been to a corner of our country where you couldn't find good lumber if you look. check out keywords like "saw mill" "sawyer" "wood mill" in your area. good luck. hope this helps.
@lesd2633
3 жыл бұрын
Nice frame. Hideous painting. Lol!
@BurkeMakesStuff
3 жыл бұрын
I’ve actually had quite a few people reach out asking if I made prints. Lol
@CRaKCed_ceTAceAN
2 жыл бұрын
Moby Dick
@BurkeMakesStuff
2 жыл бұрын
True
@pineappletop8751
5 жыл бұрын
Thank you I have so many canvases that need frames. This is by far the best DIY canvas frame video I’ve seen. I think I can give this a go!! Thank you! 😊
@BurkeMakesStuff
5 жыл бұрын
Pineapple Top outstanding! When you do, send me a pic! To BurkeMakesStuff@gmail.com
@pineappletop8751
5 жыл бұрын
Burke Makes Stuff ok I will do! I’m looking at getting set up. I need clamps! Can you please tell me the name of the clamp that wraps around the frame with the corners please? That is the bomb. I’m in Australia so I’m looking online! Thank you.
@BurkeMakesStuff
5 жыл бұрын
Pineapple Top it’s called a band clamp. The one I use is by Dewalt. It’s like $20 at Home Depot. I use it all the time!!!!
@emanisunday
3 жыл бұрын
Thank you so much! You made things easy and explained everything very well! I'm a beginner, and I now have the confidence to go make my own frame. I also love how you used tools that I already have.
@mackrmi8799
4 жыл бұрын
I have been looking for a simple yet cool looking frame and a doable one. This is exactly the one! Thanks!👍
@Rumade
3 жыл бұрын
What's this? A woodworking project on KZitem that doesn't rely on a huge amount of power tools and a massive fully stocked workshop! Where have you been my whole life? 😅 I sold a painting today and have been toying with the idea of framing it before handover. This project looks so accessible that I just might have to.
@BurkeMakesStuff
3 жыл бұрын
Lol! You’d be surprised how often I hear that! Glad I could help!
@thelawrence71
3 жыл бұрын
Awesome explanation. Haven’t read all the comments so sorry if someone asked and you answered but what is the clamp system strap you used for the frame?
@BurkeMakesStuff
Жыл бұрын
No worries. Hi! The video description has JUST been updated to include all of the items used in this video. I'm sorry for not having them up before. Here is the one for the Band Clamp: amzn.to/44Y6Uvl
@pgm5693
3 жыл бұрын
Great vid!!I will be making a few frames using this as reference.Beats paying out 200 for custom framing.Cheers.P
@KimberlyBAdams
2 жыл бұрын
This is the 7th video I've watched on building a floating frame and just have a manual miter box and saw so thank you!!! Love this video and will subscribe for sure
@BurkeMakesStuff
2 жыл бұрын
Yaaaaay!
@uniquestraveling4626
Жыл бұрын
One of the best tutorials I've watched. You make it look simple that I would even wanna do it by myself for all my paintings! Thank you so much!
@BurkeMakesStuff
Жыл бұрын
I’m just glad to help! It’s really simple. You can totally do it yourself!
@suzanneramsay574
4 ай бұрын
What wood are you using?
@angelmazzoni2509
3 жыл бұрын
Thanks for sharing, . I’ll see if my husband will do this for my paintings!
@riannar4394
3 жыл бұрын
Brilliant!! Good step by step process. Thanks I'm going to try this myself
@LeahSRaras
Ай бұрын
What kind of wood did you use and the dimensions please and thank you!
@BurkeMakesStuff
Ай бұрын
The dimensions of the wood used are 3/4” x 1 1/2”. I think this is just pine or poplar, but species of wood is totally up to you. You local lumberyard, craft store or hardware store like Home Depot will be able to help you find what you need! Have fun!
@KathyBrooksArt
2 жыл бұрын
Really enjoyed this. Great to see it done with only simple saws and mitre box. I don't have electric saws. Do have nice Irwin Japanese pull saw and a mitre box, so will give this a try. Many thanks!
@BurkeMakesStuff
2 жыл бұрын
While Urwin is usually sold quality, if you want to kick it up a notch, check out Suizan Japanese pull saws. My absolute favorite!
@RosinskyJoannis
9 ай бұрын
What about the wood you used? Can you give us a link for that too? Great video!
@BurkeMakesStuff
8 ай бұрын
I got the wood from a big box store. Didn’t order it, sorry.
@brianobegi4882
4 жыл бұрын
Wooow!! I wish I they taught this in college
@BurkeMakesStuff
4 жыл бұрын
Why?
@lemmehollaratya9443
6 ай бұрын
Hey man! Thanks for the video. Where did you source the wood may I ask?
@BurkeMakesStuff
6 ай бұрын
Big box store. Just make sure not to grab any old piece. Take a look through them. Most are crsp, but there’s some good in there if you look
@lemmehollaratya9443
6 ай бұрын
@@BurkeMakesStuff thanks for the info man :)
@edwards8630
2 жыл бұрын
What kind of wood and thickness of it do you use?
@BurkeMakesStuff
2 жыл бұрын
I believe those were 1x2, but honestly it was so long ago, I’m not 100% certain
@doppelsauger1334
4 ай бұрын
Thanks so much for this video Sadly im not talented to paint my own but i found someone does amazing paintings and i just purchased two 32x48 inch paitings and was trying figure out best way go about framing them ill be trying this method thanks!
@BurkeMakesStuff
3 ай бұрын
Outstanding!
@ashleybutcher2840
29 күн бұрын
Just watched a bunch of videos on how to make my own floating frame and this one is the simplest so far and requires the least amount of tools. Thank you.
@BurkeMakesStuff
29 күн бұрын
Glad I could help!
@mandycovington7606
Жыл бұрын
This video is brilliant - thank you! I am doing a series of oil paintings and was worried about the cost of getting them framed. Now I realise that I can actually do it myself! It was seeing you make it with hand tools that sold it to me because I thought you needed a machine to cut a mitre. Thank you.
@BurkeMakesStuff
Жыл бұрын
Glad it was helpful! You can absolutely do it yourself for a fraction of the cost!
@tim1250
Жыл бұрын
Nice job. I love the fact that you didn't use any "finishing nails". I have a finishing nail gun but not having nails showing on the outside of the frame is awesome.
@BurkeMakesStuff
Жыл бұрын
I agree. Easy to throw a brad nail in, but cleaner look without it. Also it really doesn’t need the nail as this isn’t holding any weight, just hanging on a wall.
@jessicaf6358
3 ай бұрын
The painting is AMAZING, and the frame is perfect for it, too. Great job on all counts!
@BurkeMakesStuff
3 ай бұрын
Thanks so much!
@michaelbedell6523
2 жыл бұрын
Thanks for determining the frame dimensions simplified for us weekend warriors. Great job and presentation
@BurkeMakesStuff
2 жыл бұрын
I’m glad you found value in it!
@taylorlink6311
Жыл бұрын
Hi! This is a great video thanks! I’m wondering, any tips for a warped canvas?
@BurkeMakesStuff
Жыл бұрын
I’m glad you enjoyed it! I’ve never worked with a warped canvas before. I know that often frames (not this one) are made with “keys” that are used to tighten the canvas in the frame. Maybe look into that? Or you could reach out to a conservator for advice.
@angframervlogger3499
3 жыл бұрын
thank you for sharing on my video
@BurkeMakesStuff
Жыл бұрын
what?
@TheArtofPianoism-cr2pc
28 күн бұрын
Shouldn’t you first make a smaller frame onto which the canvas is stretched and attached to and then show how to make an actual frame into which the smaller frame fits?
@BurkeMakesStuff
27 күн бұрын
Nope
@alejandrochiriboga
9 ай бұрын
Thanks for sharing Burke! What is the type/size or wood you are using in the video, and where can we find it? Also, what sort of clear coat you use? 🙏🏼
@BurkeMakesStuff
5 ай бұрын
Unsure. This went up years ago. I believe they were 1 1/2” x 1/2” but I’m not sure
@paultrottier4893
Жыл бұрын
A floating frame should be very thin all around when looking straight at the picture..This is way to thick for the size of the painting.I am a professional framer
@BurkeMakesStuff
Жыл бұрын
Thank you for your opinion.
@CrescentMoon566
2 ай бұрын
This is the best best best tutorial so far
@BurkeMakesStuff
2 ай бұрын
Thank you! I hope you find it of value!
@daniellee8830
5 жыл бұрын
Originality is key. I really liked the painting. Looked like something out of a Jaws movie.
@coloredcaboosecreations
9 ай бұрын
This video is exactly what I was looking for ! thanks for sharing ❤
@BurkeMakesStuff
9 ай бұрын
Glad it was helpful!
@robira1313
Жыл бұрын
I'm hoping you invested in a miter saw by now! Other than that - nice video!
@BurkeMakesStuff
Жыл бұрын
I did. A looooong time back actually.
@berbarmoumen1847
3 жыл бұрын
Merci beaucoup Monsieur, vraiment formidable!
@BurkeMakesStuff
3 жыл бұрын
j'espère que cela a été utile
@themotivationalmuseum
3 жыл бұрын
Can you paint me some canvas paintings $100 a piece? For nice size?
@notanetbanger
Жыл бұрын
The butter knives are driving me crazy 😩
@BurkeMakesStuff
Жыл бұрын
Against toast?
@silverlanswoodworking
11 ай бұрын
I just have to say how much i always refer to this video for frames :) Keep up the great work!
@BurkeMakesStuff
11 ай бұрын
Outstanding! Glad to help!
@drennane1
Жыл бұрын
Love it, I can do this!!
@BurkeMakesStuff
Жыл бұрын
You absolutely can!!!
@eliananaples8482
2 жыл бұрын
Hi Burke, I do have the same canvas mesure, so I will use your video. But what type off wood you are using love the color , and thickness , did you purchase in Home Depot or Lowes, Thank you
@BurkeMakesStuff
Жыл бұрын
I believe it is maple.
@tamararagerart2344
Жыл бұрын
Hi Burke, what type of wood do you recommend? Would poplar be a good choice? Or should I use a harder wood? Thank you in advance for your guidance.
@BurkeMakesStuff
Жыл бұрын
“Best choice” is relative. As long as you’re building them for an indoor, temp regulated space, for the most part just choose the wood that you like the look of. These were done in Maple I believe, but I’ve used everything from poplar to walnut. It’s all good!
@MagpieSkies
3 жыл бұрын
When measuring the for the cuts, are you measuring from the long end (outside edge) of the cut to long end? Or short end (inside edge) to short edge?
@BurkeMakesStuff
3 жыл бұрын
To be 💯, I don’t remember, however if you do it as I did it in the video it factors in the measurement for the spacing to Make it “float.”
@kjen124
3 жыл бұрын
Thank you thank you thank you! Life saver this morning! I was thinking it was going to be so complicated, this is great
@BurkeMakesStuff
3 жыл бұрын
Outstanding. Glad I could help!
@xx_naasson_xx
4 жыл бұрын
Great video, thanks! 👍 How did you finish off the back for hanging?
@BurkeMakesStuff
4 жыл бұрын
I believe I used one of those bars with the teeth that you get from Ook. Google em. Great hanging hardware. Along with that I put a small get pad along the bottom just out of site to compensate for the space the hardware takes up.
@itawad
Жыл бұрын
Great simple video. Thank you, will follow your tips
@BurkeMakesStuff
Жыл бұрын
Glad it was helpful!
@anitaesquer7425
3 жыл бұрын
That was about the best explanation of building a frame I have seen.
@BurkeMakesStuff
3 жыл бұрын
Thank you. I try to keep is simple and concise… usually
Пікірлер: 281