Good video! I also like that multicoloured flashing guitar lamp in the background. Very cute! 😊
@LonelyRocker
Жыл бұрын
I love lamp.... :)
@rjkuser
Жыл бұрын
@@LonelyRocker ha ha !!! excellent use of that quote! ;)
@Papo_Bostero
Жыл бұрын
Thank you for that video, I was looking throughout KZitem for an answer that you answered at the beginning of the video, I have that AXE I/O, audio interface, and the new Tonéx pedal. And from every video I’ve watched, they all made it sound like I needed to buy the separate capture box
@LonelyRocker
Жыл бұрын
Awesome!! Glad you got it sorted and that I was able to help! Cheers....
@Tiger1016.
Жыл бұрын
Great video! This will help with saving time knowing the limits and downfalls of Tone X. It seems that Tone X does not perform well stacking captures of drive pedals then amps. At 7:08 the stacked capture results are noticeably lacking quite a bit of clarity and presence compared to the combined capture. It seems like the Quad Cortex performs much better with the stacking of captures, which makes me wonder about how good Tone X really is. I already own the QC but just bought Tone X for DAW needs, just not sure if it will wind up replacing the QC entirely for me. The time it will take to make advanced captures without a nvidia GPU is a real deterrent, especially when the results can apparently be lackluster and inconsistent at times.
@LonelyRocker
Жыл бұрын
Thanks! the thing about Tonex is it is so new. I have spoken directly to someone on the Dev team and there's so much more coming with the software. I know the QC had issues early on and it continues to improve. Integration in Tonex is a huge priority for them. I t will get WAY better over time. Updates are coming out regularly for it.
@sandrakaminsky7107
Жыл бұрын
Excellent and I too like the flashing guitar lamp. Where did you get it?
@LonelyRocker
Жыл бұрын
:)))))
@brycevaughn8151
3 ай бұрын
I’ve got some captures going and they sound 90% there, but seem to lack some clarity. Any ideas?
@LonelyRocker
3 ай бұрын
It’s just experimentation. Try different gain levels at different stages. Your capture equipment can be a factor. But of trial and error when capturing. Just have fun with it.
@brycevaughn8151
3 ай бұрын
So can you do this without the capture unit? Or is it really needed for the process. Been having an issue capturing the sound I want without it
@LonelyRocker
3 ай бұрын
You need some kind of re-amping box which is basically what this is. Some audio interfaces have built-in re-amping capabilities. A re-amp box takes the guesswork as far as using DI boxes and things like that. Tonex Capture is really ideal for capturing with Tonex though....
@mrllookkyy
3 ай бұрын
hello i have a problem with making a capture stomp i have a fousrite clarett + 4pre. i have connected everything just like in the video and the sound is terrible everything squeaks and crackles. how do i set the routing? i think i have tried everything.... i don't know how to do it.... help...
@LonelyRocker
3 ай бұрын
Uggghhh. Focusrite routing sucks. I have issues with mine too. I now use my Helix as an interface to capture with Tonex. Wish I could offer more help!
@belicakl5242
Жыл бұрын
Very informative video. It was a big help in the hardware setup of my Tone X Capture with my audio interface. It took sometime, mostly because I have a different interface from yours, but I was able to get the modeler setup as well. Again, thanks for the video. I did run into one problem though. I tried modeling a setting of my The Astronomer V2 Reverb, Delay pedal. The capture and AI worked the way it was supposed, but the reverb setting I was recording, did not show up in in the model. It's possible that Tone X doesn't work with reverb or delay pedals. If that isn't the case, I'd like to know what I'm doing wrong.
@LonelyRocker
Жыл бұрын
Glad this helped! TONEX can only capture tone. No reverbs, delays or modulation effects. You can capture distortion, overdrive and fuzz pedals. Hope that helps!
@belicakl5242
Жыл бұрын
It does. Thanks for the info, and for the quick response 😀
@dwarkanathpramanik8545
10 күн бұрын
Sorry if this is a stupid question, but can you capture standalone preamps with the Tonex? I'd really like to capture some of my rack preamps so that I can use the Tonex pedal through a power amp instead of the preamps.
@LonelyRocker
10 күн бұрын
Not stupid at all. Absolutely. You can try capturing it like a pedal. Or try running it through your power amp and capture it like an amp and see what sounds better. Make sure to capture it without a cab. Would love to hear about your results!
@dwarkanathpramanik8545
10 күн бұрын
@@LonelyRocker thank you, that's great. I will try it once I buy the Tonex Capture and let you know how it goes.
@carpediem4413
4 ай бұрын
I captured an OD pedal but how to put the modeled pedal in front of a modeled amp? It seems there is a spot for noise gate & compressor before the amp model in times sw but how to put my pedal capture in front of an existing amp model? Help.
@LonelyRocker
4 ай бұрын
In TONEX you can’t build signal chains. But you can in Amplitube. You can add your TONEX tone models in Amplitube and stack them any way you want. If you are using the TONEX plugin in a DAW just stack plugins. PEDAL IN ONE, AMP IN ANOTHER ETC. Hope that helps.
@definitelyjin-gitaxias4071
2 ай бұрын
@@LonelyRocker is there a way to export that model back to tonex? so you can have the pedal + amp sound?
@emach07
11 ай бұрын
Man, I put 8-9 hours into it trying to do my first capture tonight (and this morning). Just ripping my hair out and finally had to give up. Updated all my drivers, might be a Scarlett 18i20 issue unless I got a defective Tonex Capture box. During the level check the built in sound demos you can't even hear now and when I strum my guitar you can see the levels go up and down even though I turned off the "Live" button. At first it worked and I also heard all the weird noises during the first capture (which failed with an error when trying to continue) but that stopped happening after the second third attempt and never came back. I can hear all my strumming and check the levels that way but still no matter what I do all I get when trying to capture is “Error while processing training files. Training will now stop.” Totally bummed out. waited so long to get all the acquired stuff to try this capture stuff. Guess I got a long road ahead of me. Spent too much money and don't feel like reselling all this stuff 😖 I love the pedal itself, but !@#$%!
@LonelyRocker
11 ай бұрын
Hang in there buddy!! I've learned there are external factors that can affect this experience. My audio interface turned out to be a huge problem because the routing was messed up. Once it's all set it's a lot of fun. Hope you sort it out!!!
@emach07
11 ай бұрын
@@LonelyRocker Thanks so much for that encouragement. I'm back at it again today. I noticed the Focusrite drivers are now 8-23-2023 instead of 2020 even though I check a hundred times yesterday and there were no updates lol but nothing else has changed unfortunately. I'm betting it's something within the Focusrite interface. I'm using the Tonex mostly as a distortion/overdrive pedal to drive my Marshall and the tone I'm getting is even better than what I had although super close. But can't wait to clone some of my pedals I have laying around that won't fit on my pedal board. Just using a tweaked factory preset right now First time using the Focusrite as well so that doesn't help 😖 Thanks so much Dan. Love your channel, love your guitar playing, and your passion for playing, tone, and gear. I'll post the solution if and when I find it. RocK on my friend 🙂
@emach07
11 ай бұрын
Holy Hallelujah!!! I finally got it to work!! You were right. It was a routing issue. I would have bet the farm it was the Tonex software. The routing on this Scarlett 18i20 is fricking weird at least to a dummy like me. I had the guitar plugged into input 1. And the output for that routed to output 3 and output 3 going into the capture box etc., etc. I had output/line out 3 set for Analogue input 1. Seemed like the thing to do as that's what input I had the guitar plugged in to. I finally reset it to factory settings and played around a little and found that it worked. I guess the default routing settings for the outputs are "playback" Once output 3 was set to "playback" everything worked!! But the capture is about 50% lower in volume. I even tried the capture level settings to where it clipped but the results still did not get any louder. So after storing it into the Tonex pedal I turned the internal volume for the patch up to 10, and it then matched the captured pedal's output volume. I had to tweak the gain a little but that's it! After that I could not tell the difference. There's a slight little microscopic difference in feel when you're playing it seems but then on some occasions, I wasn't sure lolol it's that fricking close!
@LonelyRocker
11 ай бұрын
Glad you got it figured out! Yeah. That Focusrite software is whack. I tried the Axe IO and capturing was seamless. I like Focusrite interfaces. I have a clarett. But their software is terrible. Have fun!
@cowbell2121
7 ай бұрын
@@emach07 Hi - I have the same setup 18i20 and the Tonex Capture hardware - trying to do my first capture I am getting stuck on "levels check step 2" - no sound! I also chose output 3. I have tried changing it to playback, analogue and every other option but still no sound. Any advise or help appreciated!
@davidlambert5123
Жыл бұрын
I have a couple pedals that I run into the front of my 5150 III. I have a Friedman BE-OD, & my trust old Boss SD-1. I am a very old school real amp player when I just play, but I do have an Axefx I use only for recording. What I am curious about is how the modeled stomp boxes are in front of a real amp using the Tonex pedal (no cabs or other amp captures of course) I was thinking about getting a REV G4 pedal at some point, but if the ToneX pedal can capture something like that to hit the front end of my real amp, I’d probably just get a ToneX pedal. Does it need to be exact, not really, but the compact pedal board size of the Tonex is what is really peaking my interest. I’d love to have a bunch of captured stomp boxes ready at the click of a button. I run my effects in the effects loop, so this would be just going in between my guitar & amp input. Any thoughts on this kind of setup? Also, could it capture a preamp (Marshall JMP-1, ADA MP1 etc) & then be used as a preamp into the power section of a real amp’s effects return? Loved my old JMP-1 back in the day..
@LonelyRocker
Жыл бұрын
TONEX captures pedals really nicely but it’s hard to say how well it would work for you. Like the amps it’s a single instance capture so you would capture the pedal multiple times with different settings and then the TONEX pedal tweaks take over. Like anything you need to get your hands on it to know for sure but I’ve found it quite effective using it that way.
@davidlambert5123
Жыл бұрын
@@LonelyRocker Thanks!! I have tried the Tonex CS plug in, & for an amp sim, it is great..even compared to my Axefx 3. I’ve A/B them, & it is great! I absolutely love that plate reverb!!! I’m going to be getting the pedal when I can. That makes sense about how the pedals would be captured, & I expected that. I’m an old school metal player, so everything to Eleven…hahaha who needs a clean channel anyway? Thanks is for the info! It is nice that the Tonex CS is free, so you can at least try the software…you can even try the other models out in demo. (Limited, with a hiss) so on the recording side of things you can really get an idea how the sounds will be. Plus with the full software being included , this is a great deal! Just waiting for them to come off from backorder.
@christianpizzigoni
9 ай бұрын
Hi! Great video! Do you ever try the model of pedas in real amp? I bought a tonex pedal and I would like to profile some pedals (lead channel of Jad & Frèer a valve hi gain pedal, my old plexidrive from wampler and the eruption od by colombo audio) and use only the tonex in front of my real Plexi MKII. Did you test this tipe of setting? Regards
@LonelyRocker
9 ай бұрын
Thanks!! And absolutely! I did try that and it's a great way to load up different pedals on your board. You can capture multiple instances of your pedals in different configurations and use the onboard dials to make tweaks as you need.
@djdrums
10 ай бұрын
Thanks for the vid! Q: Is it possible to 'Capture' multiple pedals individually and create a usable preset of them in series? Or alternatively, 'Capture' multiple pedals simultaneously in series to use as a preset. (My goal is simplify my guitarists 20 pedals into something manageable and many of the 'sounds' he uses are using multiple pedals at once. This is a live situation and not looking to get rid of his Mesa MIV or do any amp modeling.)
@LonelyRocker
10 ай бұрын
My pleasure! With Tonex you can't really create full presets. You can capture a pedal, pedal and amp or pedal amp and cab. For recording it works well with Amplitube for the rest of your signal chain, but for live Tonex could work great with another multi-effects pedal. On it's own it just offers reverb but no other effects, other than compression and EQ. Hope that helps!
@flashpadxxx
Жыл бұрын
Can u capture also an amp with a Fuzz before?
@LonelyRocker
Жыл бұрын
Absolutely. You can capture a Pedal, a Pedal and Amp or a Pedal, Amp and Cab....The TONEX Software makes it easy to do all 3 types...
@jedn6488
Жыл бұрын
So could you copy the new Evh sde3000 Left and right then use it in amplitube with tonex amp?
@LonelyRocker
Жыл бұрын
No delay pedals. Just tone pedals like distortion, OD, boost, fuzz and things like that.
@jedn6488
Жыл бұрын
@@LonelyRocker bummer. Thank you.
@mauroassoni8138
Жыл бұрын
Hi, good video! I wanted to ask why you can't use the profiles of individual tonex pedals in amplitube? in fact I cannot put a tonex pedal in the position of the pedals in the signal chain but only in the slot of the amps. I don't understand the choice of ik multimedia who herself made hundreds of stomp profiles but in fact unusable in amplitube! great revolution, let's hope that some holy user profiles the Cornish pedals or the famous 2290
@LonelyRocker
Жыл бұрын
Thank you. The simplest answer is Tonex development is still very early. I’ve been in direct contact with the Tonex team. More and more features will be added and this will soon be easier. It’s coming! For now, you can load a pedal into a Tonex amp slot in Amplitube. Just run multiple instances of Amplitube and put the amp second. Hope this helps!
@mauroassoni8138
Жыл бұрын
@@LonelyRocker sorry I didn't understand, how can I use pedal profiles now? now it inserts them instead of the amp and the sound is all wrong
@LonelyRocker
Жыл бұрын
@@mauroassoni8138 Use multiple amplitube plugins. Use the first one for a pedal only and then run a second amplitube plugin and load your amp. This is a workaround only for now. It will get better...
@mauroassoni8138
Жыл бұрын
@@LonelyRocker ah ok yes, but can I do it (and if so how) even if I use amplitube as a DAW? In fact I only use amplitube with its multitracks
@LonelyRocker
Жыл бұрын
@@mauroassoni8138 If you mean the standalone Amplitube app that's a problem. There is no way to load a Tonex pedal just yet. It will come in an update, I just don't know when...
Пікірлер: 50