I have a couple of designs. I tried the sliding mat, with a foam bumper in the slot. But experienced the same tear out issues as you showed! Got some great ideas, wish my various mats for mine, were bigger. Thanks Spike
@GolfBusters
Жыл бұрын
I had a little gap with a piece of foam in between and it has worked well so far!
@GolfSimulatorsbySpike
3 ай бұрын
Big tip, wash the exercise mats with dawn to remove mold release. Roughing it up makes the lexel grab even better. Later Spike On the new channel
@scottcrouch4476
Жыл бұрын
Michigan snow golf sounds a little chilly. I'll stick to 40° or warmer. Lol
@machekl
9 ай бұрын
Could you please tell me wich turf do you use on top? Thanks
@brianfleming3424
8 ай бұрын
I used liquid nails heavy duty adhesive tonight and put some power tools on top of it . Hopefully it holds.
@benwilmarth5473
10 ай бұрын
I love it! Thank you so much for posting this. I have hit most strip options on the market today & have found any well constructed divot action strip feels the best for sure. I personally want to hit a driver off a standard tee and don't like the look at address of the tee options that simply sit on the surface (tee's above 1/2" long only). I custom cut a hole into my divot action mat so I could install a short recessed rubber capturing tee where you can insert a real tee into and so far it works great. Curious if you have messed around with that complimentary part of the hitting strip yet?
@patrickmccarthy2736
4 ай бұрын
How did you cut the hole?
@Lefishn
6 ай бұрын
What type turf is that cause I've been looking to get some for the floor between hitting mats and screen. Everything I find is 3-10 square foot
@ez2963
9 ай бұрын
How thick should the surrounding turf be so I match the height of the strip?
@zetrx1
Жыл бұрын
Great video, any idea if this can be used outdoors? Cheers 😀
@GolfBusters
Жыл бұрын
The Mevo+ can the hitting strip would probably work
@me_seeks5695
29 күн бұрын
What turf did you use for dark blue/black "standing/ hitting matt"?
@paulfaulkner7765
Жыл бұрын
Is your hitting strip flush with your turf/carpet. Looks like it would sit 1/4" above if you are using the same hard foam as you have under the rest of your carpet
@GolfBusters
Жыл бұрын
It is very close to flush maybe a smidge higher and yes!
@vinhgolf
Жыл бұрын
Just wondering . Is it possible to build a hitting mat using the gym mat and place the turf over ? Thanks
@GolfBusters
Жыл бұрын
I wouldn’t there would be no give at all and it wouldn’t be super realistic. However it could be done!
@jw2par
Жыл бұрын
What was the totally cost to build?
@Hamilton951
Жыл бұрын
You have to get a 10k, golf in the snow would be so funny
@GolfBusters
Жыл бұрын
Gotta give the people what they want
@CA-ri5lu
Жыл бұрын
Will this work with a 1/2" thick piece of hitting mat instead of turf? Or will that be too thick?
@GolfBusters
Жыл бұрын
I think it could work, I would get the 3/4 soft foam and as long as the hitting mat has some dig as well I think it could be a good combo
@CA-ri5lu
Жыл бұрын
@@GolfBusters Thanks, yeah, I got a budget set up with 4x5 golf mat. I was think maybe just cutting a 1x2 slot in it. Then elevate everything 1". I already ordered the 1x2 polycarbonate, so I guess I'll give it a shot. I've got elbow issues, so hoping the divot setup helps ease the impact.
@adkinsr27
Жыл бұрын
A lot of the turf sites charge a little more for a 5mm pad adhered to the bottom of the turf. Is that what you did? I’m guessing that’s the black layer on the bottom of yours but just wanted to double check with you. Thanks man
@GolfBusters
Жыл бұрын
I did not! I have just the turf and then lay it over top of the inch foam interlocking tiles and carpet tape part of it down.
@adkinsr27
Жыл бұрын
@@GolfBusters niiiiice…even cheaper. I like that
@Marc89000
Жыл бұрын
Would you suggest 1" foam pads or would 1/2" be good enough?
@GolfBusters
Жыл бұрын
For the wall panels or flooring?
@GolfBusters
Жыл бұрын
Ohh sorry looking at the wrong thing. 1 inch for sure
@Marc89000
Жыл бұрын
Yes, I meant flooring. Thanks. Trying to find these things on Canadian Amazon.
@GolfBusters
Жыл бұрын
Yea 3/4 is the lowest I would go but would highly recommend an inch
@sinkingputts
Жыл бұрын
This would create a flier
@nebaseball6
7 ай бұрын
What do you do for for a tee if you want to hit driver?
@GolfBusters
7 ай бұрын
birtees!
@nebaseball6
7 ай бұрын
@@GolfBusters thanks. Is drilling through the plastic an option for lock in tees? Or birtees the best way to go?
@tjrose6845
Жыл бұрын
Any chance you can show how. To make a mat with this insert
@GolfBusters
Жыл бұрын
I have a full video that covers this! Search my channel you’ll find it!
@Enrichener
2 ай бұрын
I got about 6 hits out of mine before it cracked. It was only 1/2" high tho maybe thats why. Cuz the poly was .1 so i dont think it was too thin but idk
@GolfBusters
2 ай бұрын
My guess is the 1/2 inch
@golfer1553golfer
Жыл бұрын
What model is your turf?
@GolfBusters
Жыл бұрын
Off the top of my head ASM25 it’s like 99 cents a square foot
@neilengelbrecht2447
3 ай бұрын
Do you still use this, and does it still last? Not sure if this was your latest video
@GolfBusters
3 ай бұрын
I have a different now! I have a video I released after this that shows how to use it
@intothebreak571
6 ай бұрын
How do you tee up?
@GolfBusters
6 ай бұрын
Birtees!
@zacharymilos392
Жыл бұрын
Do you remember what the exact model/make of turf you got? I clicked the link but it's just their main home page.
@GolfBusters
Жыл бұрын
I believe it was AM25
@GolfBusters
Жыл бұрын
Get the MEVO+ for the lowest possible price using code GOLFBUSTERS10 and our link: flightscopemevo.com/collections/all?sca_ref=2830986.E8wPVjrbwy Note: If the code does not take any money off that means there is a sale going on and you are already receiving the MEVO+ at the lowest possible price. Either way, using our link and the code will guarantee you are getting the MEVO+ at the lowest possible price and it helps support us!
Пікірлер: 50