That arcade box turned out so perfect. And everything is better miniaturefied! Sweet build, Bob!
@Iliketomakestuff
8 жыл бұрын
Thanks!
@SpecificLove7
8 жыл бұрын
Nice setup
@danielmiskoidea
8 жыл бұрын
I really enjoyed this one,this could be a scroll saw project.
@Iliketomakestuff
8 жыл бұрын
Thanks! Yes, it definitely could. It's also kind of motivated me to figure out the scroll saw :)
@tbucsclw1
8 жыл бұрын
so happy that you are using Kodi, so many add-ons and free movies and TV shows
@BenBrandt22
8 жыл бұрын
Fun build, nice to see that eyeballing and making rough-cut parts can work out just as well as precision stuff. I liked how you built up the internal supports to fit with small pieces.
@andyandnancy
8 жыл бұрын
You are awesome Bob! Between your KZitem channel, and Making It Podcast you are one of my greatest inspirations. Thanks for being there to inspire me!
@Iliketomakestuff
8 жыл бұрын
Wow, thank you so much Andrew!!
@Makebuildmodify
8 жыл бұрын
Wow, I didn't know the electronics were so simple. Great job!
@theantithesis1
8 жыл бұрын
I would recommend putting some vent holes near the top so that the heat has somewhere to go when you're using it. If you're lucky, this will make a natural draft where the warm air goes out the top and draws in air from the gap at the bottom to help keep things cool. Granted ARM processors like on the Pi don't produce as much heat as non-RISC machines, but they do produce some and boxing it up in wood is basically wrapping it in insulation. But, that gap in the back is probably sufficient to keep it from overheating. I don't know. But check it when using it. If it gets a bit too warm, venting the top might be the way to go. I suggest drilling a series of small horizontal holes in the back bevel so it doesn't show and so the holes don't let dust fall into the cabinet. But horizontal holes may restrict air flow too much. Just spitballing here.
@katebasko6632
8 жыл бұрын
I know that I will never make any of these projects but I just love watching him and see what he makes with his high creativity level!
@JonathanRansom
8 жыл бұрын
Nice one, Bob. Great idea for the enclosure.
@Iliketomakestuff
8 жыл бұрын
Thanks!
@cyberteapot3330
8 жыл бұрын
What is this, A media center for ants?
@Iliketomakestuff
8 жыл бұрын
Hahaha :)
@themaconeau
8 жыл бұрын
Why not? They deserve some R and R, too! :)
@MotoMendez
8 жыл бұрын
what is this, an arcade for ants!?
@jebowlin3879
8 жыл бұрын
Glue on tiny buttons and a joy stick and its totaly legit :D
@vampjoseph
5 жыл бұрын
XD
@adamgabbert
8 жыл бұрын
Who's Kodi, and where's the pie? These electronic projects are way over my head
@phil.pinsky
8 жыл бұрын
This is a really cool project. I've been sitting on my RasbPi for about 2 years now. Time to make a media center! As you know, I love the demo footage you used at the end :)
@TheLucos1996
8 жыл бұрын
Best Raspberry case ever made!
@3DPrintingNerd
8 жыл бұрын
Yes! This is EXACTLY what I have been looking for. Dude, thank you!
@Iliketomakestuff
8 жыл бұрын
Sweet! No sweat!
@scottsh21
8 жыл бұрын
Very cool project. Tech. part seems pretty straight forward and easy with the pi.
@RowdyPenguin
8 жыл бұрын
love the excitement you have for working with electronics. Great content Bob!!
@AugusDogus
8 жыл бұрын
A solid state drive drive aye? Haha, keep up the great videos!
@Geeksmithing
8 жыл бұрын
He may have bought it with cash from the ATM Machine too! :D
@Geeksmithing
8 жыл бұрын
haha, good one!
@robahern549
8 жыл бұрын
where he had to use his personal identification number number.
@emintivo
8 жыл бұрын
Great project to do with the kids. Nice job, I really like the way you used the scaled down version of your arcade cabinet. 👍
@MarcSchaefermeyer
8 жыл бұрын
That's one of the sweetest pi cases ever! I don't think you ever said how big your SSD was? I use 2 pi with osmc networked to stream the media. Then take one of these when we use the trailer with a powered USB and 2tb HDD with all of our movies. Love these things! Great build!
@Iliketomakestuff
8 жыл бұрын
Great idea! I never thought about taking it on trips! My drive is a 480GB.
@MarcSchaefermeyer
8 жыл бұрын
Yeah I've taken it in the car, camping trailer, houseboat. It's so nice to be able to have movies/music.
@Jay794
8 жыл бұрын
another amazing build Bob!
@russianfirepower5338
8 жыл бұрын
super cool bob, I think you are doing a super good job on your projects
@MattleyIt
8 жыл бұрын
Great jobs and really cool design 👍
@Iliketomakestuff
8 жыл бұрын
Thanks!
@BruceAUlrich
8 жыл бұрын
That turned out great! And it was surprisingly simple.
@Iliketomakestuff
8 жыл бұрын
Thanks! Yeah, way easier than it used to be!
@OmegajimTypeR
8 жыл бұрын
dude, you make me want to buy tools, and start working on something, but I have a problem. I live in a single bedroom apartment with my brother and room is limited. I would like to get the big set up you have, but I know I can't do it. Anyways, can you make a video about a small workshop that I can fit in a closet or a corner in the room, or maybe a video of how to make something awesome with small tools. Thank you, Love your show, and I fell like I'm going to be sub. to you forever!
@Spartakips
8 жыл бұрын
To be totally honest with you, I used to have a garage shop and had to move unexpectedly into a much smaller space, and while it's certainly not as convenient with all the power tools, it's forced me to get creative with how I do things. I'd highly recommend that, if you want to make stuff, just go for it! All you need is a shelf in a closet, or a big fabric tool bag, or even a cardboard box, fill it with some hand tools and a drill or a dremel, or find a local maker space. You'll be surprised at how far that will take you! Tools and space are second to drive and creativity :)
@reforzar
8 жыл бұрын
You should make a shrink/enlarge ray gun next and make it full size! Cool stuff!
@JohnNukem
7 жыл бұрын
That is so cool. I have started doing my own projects at home due to your channel. I will make sure to share you photos of my projects! Thank you for doing your show and inspiring me to do more!
@I3urton
8 жыл бұрын
Now THIS is something I'd really, really like to make myself! Not necessarily in such a fancy case, a relatively flat and subtle box would suffice. I'd like my own with a little more functions tho (blu ray drive and w-lan-stick [if even needed]), just so I'd basically have one device to rule them all.. but yeah. This is really something I'd like to make myself.
@paulharder407
8 жыл бұрын
That's awesome. I love how you just made a smaller version of your arcade. you should 3d print some small joysticks and buttons and glue them on to continue the arcade theme.
@MechNinji
8 жыл бұрын
HEEEEY! You're left handed too!!! 7:20!!! And that media center is amazing! love it!
@Iliketomakestuff
8 жыл бұрын
I am!! :)
@MechNinji
8 жыл бұрын
:D
@vaulimere
8 жыл бұрын
Great build Bob
@danniiii
8 жыл бұрын
i love all of your videos.. i like to watch stuff that you make lol its compelling
@stefanbaas
8 жыл бұрын
Holy pie! This is one hella awesome project! Nice job Bob.
@WRMILLER
4 жыл бұрын
pretty awesome idea! ... imagine adding a portable full size arcade stick for two players. then when you have your mates over or visiting friend you tell em you bring you arcade with lol :D the surprise on there faces when they see this tiny Arcade :D
@MattDiresta
8 жыл бұрын
awesome project !!! i gotta say i was waiting for that side by side pik with the big boy arcade machine!! great work bud.
@panthergod73
8 жыл бұрын
Bob, I work for Allied Electronics/RS and really love your recent Rasperry Pi 3 projects. Would love to know about future RP3 projects.
@DavidBishopinc
8 жыл бұрын
That is super cool Bob. Awesome.
@Iliketomakestuff
8 жыл бұрын
Thanks David!
@norm1124
8 жыл бұрын
Very lovely build, intelligent reuse of your brand elements and as usual: very well done education of all steps. Congratulations!
@eflizotte
8 жыл бұрын
great job bob! this is a great build!!
@LivefreeanddiyTv
8 жыл бұрын
great build, you can do so much with a Raspberry Pi, love it 🤓 👍🏼
@fanlou1698
8 жыл бұрын
Hi Bob! Kodi is compatible with some infra red remote command. On my tv I start kodi and use remote controler to navigate on my media files to read !! In fact, when kodi is installed ni keyboard and mouse are needed !! (Only if you use the hdmi cable ). Try it and says us please !!
@jonnycagejonny
8 жыл бұрын
I love this one! Soooo cool! I want to build one even that is don't need it.
@wadefallin
8 жыл бұрын
Very cool Bob! Thanks for sharing. I have marked this video as a favorite, why? I AM GOING TO BUILD THIS
@Iliketomakestuff
8 жыл бұрын
Excellent!
@azyfloof
8 жыл бұрын
Nice idea, Bob! Great end result, too :D If you wanted to use a repurposed TV remote, you could even put an IR receiver module behind that frosted window :)
@SteveGoodenough
8 жыл бұрын
Brilliant arcade enclosure
@AdventureGearGoods
8 жыл бұрын
Love this media center. Totally inspired me to make a miniature jukebox!
@brentbousquet
8 жыл бұрын
I find that taking the guide off the scroll saw works way better. Also I flip the blade around for MDF, not sure why that works but it works with my type of blade.
@Iliketomakestuff
8 жыл бұрын
Interesting to know, thanks!!
@CheveeDodd
8 жыл бұрын
This is awesome. Moving it up a few notches on my project list. :)
@italiancatdad6679
8 жыл бұрын
This is awesome man! From one guitarist to another, have you ever considered a single guitar case or a rack? Keep being awesome man!
@Iliketomakestuff
8 жыл бұрын
Thanks! Well, I've thought about the case, but mine all already have cases, and my space is limited :/
@italiancatdad6679
8 жыл бұрын
I completely understand all my guitars do as well. One day if you get a new guitar you could always give it a shot! Either way man i love your work and wish you the best. :)
@DOCDARKNESSREAL
8 жыл бұрын
Awesome work Bob - Love these hybrid projects :)
@blaknyte
8 жыл бұрын
This is crazy. The timing on your project is ridiculous. A couple days ago I ordered a Pi and that same keyboard to do just this. I was just today looking around for interesting ideas for a case for it. So is this synchronicity or our collective zeitgeist (or some other $2 word). Either way loved the project, keep up the good work.
@Iliketomakestuff
8 жыл бұрын
Awesome!
@allluckyseven
8 жыл бұрын
Seriously beautiful stuff. And great tip on the Pi kit!
@felixfromnebraska8648
8 жыл бұрын
Thanks Bob, I see that you are very handy with this stuff. I imagine your kids love it when you make the smaller stuff. Did you learn this stuff by fooling around or have you had some training in it?
@Iliketomakestuff
8 жыл бұрын
Thanks Felix! I'm just learning as I go!
@AmeeBor
8 жыл бұрын
It's such a cute little machine!!
@damirserban
7 жыл бұрын
seems like you love ancient arcade machines a lot :) bet you loved the Last star fighter !
@stek_customfurn
8 жыл бұрын
Hey Bob, love your videos, I'm from Australia so i had to stay up to get the video. I love making stuff as well and you're videos inspire me, keep making great videos.
@Iliketomakestuff
8 жыл бұрын
Awesome, thanks so much! Get some sleep :)
@Bretts_Builds
8 жыл бұрын
Does it matter which terminals you plug the LED into?
@destroyer8000
3 жыл бұрын
Be ready for a few things if you are looking to build a more elaborate media center keep in mind you will need a lot of storage. If you transcode your media to x264 or x265, the Pi will NOT be able to transcode your media. It’s passamark is around 900 and you need at least 2k of processing power for 1080p. If you DON’T transcode your media, this should be able to do it, but your media will be 10 times larger (literally) on the hard drive. Bigger drives are more spendy. And HDDs that aren’t solid states like he uses in the video are much cheaper but need more power. Just to keep in mind.
@NirvanaWoodWorksbyJanie
8 жыл бұрын
Hey Bob. Love your projects. Question: what kind of spray laquer did you use (7:30-7:35) to seal the spray paint? I was told that you couldn't use spray laquer on spray paint as the lacquer solvents can 'dissolve' the paint 😕. I recently finished a project that I used rust-oleum spray paint (various colors) & I didn't know what to use to seal the paint. I thought about using rust-oleum clear spray paint but my local hardware stores didn't have them in stock, so I left the project without sealing it. Thanks boss! I look forward to hearing from you soon!!
@maxgatrell2056
7 жыл бұрын
Brilliant vid, definitely food for thought.
@italiancatdad6679
7 жыл бұрын
Hey Bob, what grit sanding block would you recommend getting a matte black finish off some wood? It's a very thin coat. I used an orbital sander to get most of it off but some parts of the wood curve and bend and need a hand sanding method. And to touch up and smooth the surface for re primer (which would also be what i use the block for). Thank you for the time and your hard work. Keep being awesome man!
@Iliketomakestuff
7 жыл бұрын
I tend towards 100 grit for most general use. It's not too rough but still does some removal.
@RemiDupont
6 жыл бұрын
Woa nice! It's a mini-me for the big one lol. Btw strange how your shirt matches perfectly your eyes colors. (at 0:03)
@themushintrader2836
7 жыл бұрын
Great build! Did you use Raspian for the media center? Or it has a player for the movies on the HD?
@joshclark44
7 жыл бұрын
you should have had a mini screen for the pi as the arcade screen. even if it's far too small for input you could still make it do cool animations in the background like a real arcade booth
@GraphiteSamurai
7 жыл бұрын
Bob!!!! I didn't like this video...I Loved it!! excellent that you covered both building and tech with the Raspberry Pi! Fun project , these are great ideas for me to share with my sons. Thanks so much!
@borzelmakes8478
8 жыл бұрын
Love it! I really like how it looks like your big arcade! :)
@keithboaz9065
8 жыл бұрын
Just one more thing I want to do with Pi now. I'll have quite a few of those once the projects begin.
@Hubbmade
8 жыл бұрын
Great! I love watching your work as always. Thanks Bob.
@Iliketomakestuff
8 жыл бұрын
Thanks!
@11rmax95
8 жыл бұрын
Awesome video! You make it look so easy haha
@Dosbomber
8 жыл бұрын
I've already added a few things from your Amazon shortcuts to my wishlist, but the one thing I'd really like to know more about is that awesome wooden handle on your exacto knife. Is that something you made yourself?
@Dosbomber
8 жыл бұрын
Nevermind... found the Kiwi.
@theguyver6397
8 жыл бұрын
Awesome idea!
@niklasxl
8 жыл бұрын
You can also use control over hdmi and control kodi with the remote for your tv. Works great for me (raspberry b+) :D
@Iliketomakestuff
8 жыл бұрын
Oh, good point! I'd forgotten about that. I guess it depends on if the TV supports that protocol. Surely most of them do by now.
@niklasxl
8 жыл бұрын
yeah, my tv just showed a message that control is active when i started my raspberry pi with kodi
@laughingcheeze8566
8 жыл бұрын
That SSD kit looks awesome, I just wish companies would migrate to Type C already! Death to Micro USB.
@MakingStuffco
8 жыл бұрын
This is a great project!
@eformance
8 жыл бұрын
The WD Pi Drive is a slick drive for the Pi too.
@erniedouglas123
8 жыл бұрын
Great build Bob! That Kingston SSD will work off the power of the raspberry pi? I know you said more than one would need another power source but one doesn't?
@Iliketomakestuff
8 жыл бұрын
Nope, one seemed to be powered just fine. I ran it for a long time and didn't see any issues. I doubt it would support any more than that, but looking at the necessary amperage per drive would help figure that out.
@dylanborchert8156
8 жыл бұрын
Hey, I did this before it's amazing!!! You can put it on retro pie too!!
@nhc8030
8 жыл бұрын
Hey Bob, I was going to make some foam props, but when I went to Lowes, the EVA floor mats were $18! Is that how expensive they are for you?
@Iliketomakestuff
8 жыл бұрын
I only buy it from Harbor Freight. Do you have one of those local to you? A pack of 4 mats is $9.99, and sometimes $5.99 on sale)
@nhc8030
8 жыл бұрын
I think one is like 30 - 40 mins away from me! I am really interested in prop making so I'll check it out! Thanks! One more question: Do you have a specific time that you do live streams on twitch?
@Iliketomakestuff
8 жыл бұрын
Parity Cuber Yes! Every Wed at 11am eastern time
@nhc8030
8 жыл бұрын
Awesome!
@rmswimmerman3561
8 жыл бұрын
What kind of CA glue do you use. I noticed that you use it a lot, so it must be good.
@killenmyful
8 жыл бұрын
Id recommend a heatsink on that Soc chip.
@RSpudieD
8 жыл бұрын
now that looks so cool!
@lawrencesze1725
8 жыл бұрын
awesome idea!
@angelkcrez2305
8 жыл бұрын
i think you should make an expandable table! that would be a great challenge! 😎
@BC-bf1fq
8 жыл бұрын
Good stuff - I'm thinking I may want to make one of these.
@samin8ter
8 жыл бұрын
King of making random stuff.
@gretafinz6486
8 жыл бұрын
Thanks, Bob. I think I'm actually going to do this one.
@Iliketomakestuff
8 жыл бұрын
Excellent!
@Turner00
8 жыл бұрын
Yo Bob, SSD stands for Solid State Drive. No need to say SSD Drive. Anyway, keep up the good work!
@Iliketomakestuff
8 жыл бұрын
yeah, yeah. I know. :)
@enhydralutra
8 жыл бұрын
For a cheap media center, that's not bad, but 240 gigs isn't going to get you very far. That's about 50 movies or around 200 television shows at 1080p, far less at 4K. Not to mention that just having a media center is not as much of utility as it could be. You can build a FreeNAS server for next to nothing (sometimes even using an old computer) and add a few server-grade hard drives (which are dirt cheap, even at higher capacities). It will take a bit more setup, but you'll have a Plex server for all your media, a way to download media, a way to stream media while you're away from your home, and a way to backup important data automatically from any computer or device on your network.
@robertoakley2296
8 жыл бұрын
Hey mate I really enjoy watching you make things but could you be able to 3d print a giant infinity gauntlet or show how to make a wearable one that you can make with items from the dollar store or something like that
@JanikPilz
4 жыл бұрын
Could you sell the Digital Plans how to build it? That would be realy nice, because i want to make something like that but i realy don't have the time and money to build the "big/true arcade cabinet"
@marry19900124
8 жыл бұрын
can you teach how to make canvas stand (somehow similar to Bob Ross)with table and a place for the bucket but so that it can also be portable and so that I can close it when I don't use it since I live in a tiny apartment?
@DieserMany
8 жыл бұрын
That's a very cool project, I would like tto do something similar, but I would need a new TV and money for a large SSD xD Still great stuff again, really like your videos :D
@FredMcIntyre
8 жыл бұрын
Really awesome!
@johnbudd617
8 жыл бұрын
very cool i like this and I'm making it right now
@DJn00b94
8 жыл бұрын
"Comes with really nice USB enclosure" seconds later, mini USB 2.0. Good job Kingston, good job...
@alsanova
8 жыл бұрын
0:01 - Oh wait.... Did you just shrunk it?! You build a massive arcade and now it's sitting on the workshop?! O_o Great vid btw :)
@GeneralBoboDK
8 жыл бұрын
Fantastic idea! :) Good work as usual...!
@Iliketomakestuff
8 жыл бұрын
Thanks!
@aleushah
8 жыл бұрын
Really nice project, it's a great case for a Raspberry Pi. What's the name of the skin you have in Kodi? it looks good.
@Iliketomakestuff
8 жыл бұрын
It's the default that comes with OSMC (the os I installed)
@aleushah
8 жыл бұрын
Thanks! I installed OpenElec and the default one is Confluence. I'll check it out
@IIGrayfoxII
8 жыл бұрын
How well does it handle high bit rate H.264 or H.265?
@ceeeeeeeeeeeeeeeeee
8 жыл бұрын
Rasperries cant hardware decode h.265
@BennyDeBock
8 жыл бұрын
Hi bob, first of all let me say i absolutely love your videos :) second is how do you come up with all those projects and how did you pay for those machines like the band saw?
@Iliketomakestuff
8 жыл бұрын
Thanks so much! The projects just come to mind here and there. The machines are paid for by working really hard for years and saving money up to buy them.
Пікірлер: 348