Teaching me better than my journeymen. I’m a new apprentice and your videos are really helping thanks!
@jpadtv1178
2 жыл бұрын
Glad to hear that im helping out! thanks for your support! make sure you watch all my other videos
@ryanbeckel6912
4 ай бұрын
Wish you had more videos bud. Love from Alaska, refinery insulator.
@Suge_
2 жыл бұрын
This helps a lot. I have a guy at work that taught me the same way you did. But this helps so I can learn at home and remember the steps.
@jpadtv1178
2 жыл бұрын
thank you, the videos will always be here for reference
@gforcekill
2 жыл бұрын
Watched video last night, made couple practice patterns. Went to work and made patern installed tee and fit like glove. Very helpful videos.
@jpadtv1178
2 жыл бұрын
That is awesome man, im happy to hear that! im glad the videos are helping!
@Nolan1a
2 жыл бұрын
Love the videos, your explanations are great and your execution is awesome. Keep up the great work and pump out those videos, ill be sure to recommend anyone learning to check out your channel. I remember a few years ago I never once seen anyone making videos like this. It's a good niche you can dominate.
@jpadtv1178
2 жыл бұрын
thank you so much for the support, ill keep making videos whenever I can for sure!
@chuckwick1606
5 ай бұрын
Thats sweet I've never seen it done this way ! Thanks
@luckgaming9140
Жыл бұрын
So helpful for us young guys
@mattdall1115
Жыл бұрын
Thanks for the english versions.
@haidsyal5021
Жыл бұрын
Thank-you so much brother please keep coming out with more videos & stay positive stay motivated stay goal orientated work hard to achieve greatness 😊❤
@tywitzel7476
Жыл бұрын
There's definitely easier/more efficient ways to do that layout and the pattern for the hole cut
@imperial_dragon2
2 жыл бұрын
Im studyng for my nccer and this channel really freaking helps.. visual learning is better than paper learning.. in my opinion.
@jpadtv1178
2 жыл бұрын
thank you! im glad im helping you out!
@user-py3lv4zi7x
5 ай бұрын
Thank you my friend, no more ordering aluminum 90s for me. Just need my pexto and ill be goring them from now on, thank you for the video
@chuckwick1606
5 ай бұрын
This isn't a gore lol
@Libanfamily
2 жыл бұрын
I am insulator and i learned easer way to do that unequal tee pls post more patter for equal tee and equal later pls and thanks
@jpadtv1178
2 жыл бұрын
Yes there’s easier ways you can do this mainly when you’re learning different ways on the job, I’m just trying to teach everyone the handbook way to learn everything from scratch, I have the other videos in the channel just go to the page and you will see all the other videos
@Libanfamily
2 жыл бұрын
@@jpadtv1178 thanks I really appreciate it how you did this unequal Tee pattern and learned can you please post videos how to do EQUAL LATERAL and UNEQUAL LATERAL and thanks
@danielharmon8849
2 жыл бұрын
love watching your videos and I have learned so much from you. can you please do a video explaining how to make a pattern for a gore for a vessel head please. I'm having issues trying to figure this out.
@jpllopez165
3 ай бұрын
ThAnks bro
@rigobertoesquivel1000
Жыл бұрын
Thanks I’m still learning
@jamesmunden4607
7 ай бұрын
Great video
@dompo8923
2 жыл бұрын
Such a sick video!!
@christianchalifoux5484
2 жыл бұрын
Sweet!! Thanks helped a lot
@phillipsin6102
8 ай бұрын
Good Job
@braxtonbrewer1449
2 жыл бұрын
Hey could you do a video on laterals in the near future?
@jpadtv1178
2 жыл бұрын
Yes I will
@barrybitsui2848
Жыл бұрын
.....so one of the traits we learn as an insulator is observation.....see to that the main is metal already and the measurements came.....
@ashleyhubert7971
Жыл бұрын
Can you do a video of you making the unequal tee from just the insulation
@RS-ld6jf
Жыл бұрын
I like your job mate and send me more videos
@peterparsons7652
2 жыл бұрын
Awesome, keep up the good work
@Freeliving85
Жыл бұрын
Hi do you have more pipe fitting with formula please
@haidsyal5021
Жыл бұрын
I don't know any insulation jokes but I'm doing "Asbestos" I can 😅
@jpllopez165
3 ай бұрын
Can u do metal out a 45 degree
@ronaldonegrete369
Жыл бұрын
Hey jpadtv or anyone here on minute 6:25 when he said half of the big pipe is 31 which is 15.5 he said he set he’s dividers to it but it doesn’t look like 7 3/4 on his ruler
@barryobongo8833
Жыл бұрын
my best guess is he's using centimeters edit: I think he just mixed up some numbers. he should be taking the circumference and dividing by pi to find the diameter, then halving the diameter to set his dividers.
@barryobongo8833
Жыл бұрын
edit 2: I think the circumference ruler he uses has the calculations done on one side of the ruler already
@tonyramkissoon2086
2 жыл бұрын
Great video..can you do fabrication for domed heads
@tanikatoliver598
2 жыл бұрын
Can you do a video on how to do lateral or roof drain piping
@Yjdjdjfjfjc
2 жыл бұрын
Saludos desde México amigo, esperamos el de Español
@jpadtv1178
2 жыл бұрын
Claro que si hay viene!
@dannyshea6647
2 жыл бұрын
When you first got the circumference and you split it in half to 10-5/8. What was the measurement on the ruler? The dividers didn't look to be spread at 10". Im still learning how a circumference ruler works and I'm learning on my own.
@paulkeavy8550
2 жыл бұрын
Circumference is converted into diameter,so he's using half the diameter(across the center of pipe) across the pipe
@user-mk8hu7yt7y
Жыл бұрын
Take the circumference and divide by pi (3.14)
@haidsyal5021
Жыл бұрын
I was literally gonna ask the same thing until I scrolled down cause I new someone thought the same lol cheers
@joemacdonald1220
5 ай бұрын
The measurement is half the diameter.
@lance2890
Жыл бұрын
Do a stove pipe 90
@raizesdosertaopescafauna2695
2 жыл бұрын
Amigo, teria como colocar opção de legenda em português. Seus vídeos são ótimos, parabéns !
@jpadtv1178
2 жыл бұрын
Muchas gracias!
@infamousorca7394
2 жыл бұрын
Basically you only need the radius of small and big pipe to make the pattern, right?
@jpadtv1178
2 жыл бұрын
Yes thats one way to do it without having the circumference ruler. you can do it with the radius of the pipes
@rizals1613
Жыл бұрын
I dont understand .. can u give example calculation ?
@shuth776
Жыл бұрын
What if u are going from big to small
@josephhernandez6859
2 жыл бұрын
Is it the same steps if you only have the radius of the pipes?
@chiquillosherif
2 жыл бұрын
He is using the radius, which would be the top number on his circumference ruler.
@ElBelico_704
2 жыл бұрын
On foam glass si lo roba un chingo
@jpadtv1178
2 жыл бұрын
Si cada material es un poco diferente con las medidas
@RowdeBoy
Жыл бұрын
Yo bro you don’t post any new videos anymore ?
@matthewburk472
2 жыл бұрын
Does anyone know how to cut the metal for a new insulated pipe that is larger then the existing pipe that it T's into....I had to replace the insulation on a pipe with 18 inch circumference (after the foam glass was installed). The pipe T'ed into a pipe that already had the metal with a 14 inch circumfrence.
@matthewburk472
2 жыл бұрын
Basically the opposite of this video (reverse the pipe sizes)
@Jacobfernandezg
2 жыл бұрын
What if both my pipe size are bigger than what my compase can go up to?
@jpadtv1178
2 жыл бұрын
You’ll have to invest on bigger dividers or make your own out of a piece of string with a nail and a pencil
@vuqtx2591
2 жыл бұрын
Where did you buy that ruler?
@luisjim2lab285
2 жыл бұрын
Hola 👋 buen video tendrás correo electrónico quisiera saber si le has puesto láminas de metal a fans ?
@jpadtv1178
2 жыл бұрын
si jpadtvofficial@gmail.com
@plebe2353
2 жыл бұрын
Porfavor podria aser el pero de la tee pero en una parte no en dos
@estebangomez9132
2 жыл бұрын
Hey buddy where do you purchase that Circumference roller?
@jpadtv1178
2 жыл бұрын
any insulation or sheetmetal supplier should have it, its made by Lufkin so i think amazon or the official lufkin website.
Пікірлер: 73