As a tip, your stamp would stamp much better if you were to put a thin layer of foam (craft foam would work) between the wood and your rubber stamp. Alternatively, you can place some foam under the paper or a stack of paper to give it some padding when stamping with the one you already mounted. Rubber stamps on wood blocks need a little bit of give/padding to get good impressions.
@mncustom-made-barblafond6825
Жыл бұрын
Great tip thanks!
@angeladandridge2824
2 жыл бұрын
Patrice not sure why you could not near me saying to " Mirror your Image ". But this is the video that has convinced me to buy the X-Tool...thanks for helping me spend my money. Stamping tip: apply the ink to the stamp, this helps keep the ink from getting on the edges or cut the excess way. Now I'm off the buy a X-tool. Thanks again for all you do!
@CraftableThings
2 жыл бұрын
Hey Angela!!! SMH! I wasn't listening. 😂 Thanks for the tips. I think that you will love the xTool. If you have FB, I would suggest joining this FB group: facebook.com/groups/378358767386789
@angeladandridge2824
2 жыл бұрын
@@CraftableThingsThanks and I just request to join the FB group.
@user-qy9rg3nt2l
Жыл бұрын
Thank you for the video. I was actually using the magnets under the honeycomb as feet, since I thought it needed the space for airflow. Now I can actually index my wood stock without fail. The more videos I watch, the better. Subbed.
@737mechanic
2 жыл бұрын
Love the fact that you goofed up and laughed about it. Cute.
@CraftableThings
2 жыл бұрын
Laughter makes everything better, right? 💕 thanks for watching!
@nancygreen2102
Жыл бұрын
You made my day , I didn’t even know I could make these which will be a game changer but I’m so glad you didn’t edit out your mistake with the mirroring !🙂
@CraftableThings
Жыл бұрын
Thanks for watching! 💕
@julieberry7718
Жыл бұрын
Great instructional video. Thank you for showing the mistakes. I find that very helpful and informative as I am new to laser tools. Looking forward to watching more of your videos.
@pieperbishop451
2 жыл бұрын
So my thought on why it didn't stamp in the middle, you need to make sure that you apply glue evenly over the entire stamp. Looks good, made me giggle that you didn't reverse the image. I was yelling at the video though. hehehe
@CraftableThings
2 жыл бұрын
Thanks for the tip & Thanks for trying to tell me that I forgot to reverse it! 😂 I don't listen 💕
@cjauchius1957
3 ай бұрын
@@CraftableThings I don't listen lol ! Me either.
@createinspain
Жыл бұрын
Lol, as soon as I saw the design being done..oh well, we all goof up sometimes! Another stamping tip for you, a piece of craft foam under your paper might make it stamp ok...but it does need to be a deeper engrave. I have made Polymer stamps at home for years using a UV polymer and a lamp but I'd be tempted to laser cut them if I wanted to make a load of them.
@PaintByMonster
Жыл бұрын
I LOVE LOVE LOVE that you did not remember to flip the image! bless you, friend! i subscribed!
@butterflyj685
Жыл бұрын
Thank you for the video! Is the Xtool D1 you showed in this video a 10W or 20W? I'm trying to decided which one to get for making my stamps.
@joannc-joannscreations
2 жыл бұрын
Patrice I was yelling at the video saying mirror it. 🤣🤣🤣
@CraftableThings
2 жыл бұрын
Thanks for trying to tell me. You know I'm a hot mess.
@joannc-joannscreations
2 жыл бұрын
@@CraftableThings your not a hot mess you got a lot on you plate and I still love you 🥰
@morganmccolery1644
Ай бұрын
How did you invert the image on laserbox? I've been trying and can't figure it out. Help please, lol
@jstewartslaboratory
Жыл бұрын
Not me wanting to make a stamp and absolutely NOT needing it lol. Congrats Brian!
@mncustom-made-barblafond6825
Жыл бұрын
Ooo now that my laser came I will need to try this!
@TheBestUni
2 жыл бұрын
It still amazing
@CraftableThings
2 жыл бұрын
thanks, boo!!! 💕💕💕
@CherelleDanae
2 жыл бұрын
Do you have the link for the stamp kit you bought? I don’t see it listed in the description! Been wanting to try to make my own stamps!
@TheJ3Production
9 ай бұрын
The most important thing in this video is how you invert the image, and its now shown....
@fjordhestfarm8667
Жыл бұрын
Omg the whole time I'm like MIRROR IT!!! 😂
@CraftableThings
Жыл бұрын
😂
@BionicBuilds
5 ай бұрын
This was a helpful video. Thanks for making it. I can't find any mention of the LED wattage. I've got a 5w D1. Do you think that will work, but with more passes? I'd buy the material from xtool with your affiliate link, but can't find the link or code. Thanks again.
@zeldamitchell1176
Жыл бұрын
Could you explain how you inverted the image in x-tool creative pace?
@ssnoyes
8 ай бұрын
Draw a shape (in this case, a rectangle) around it, select both the shape and the image, Combine -> Subtract.
@mncustom-made-barblafond6825
2 жыл бұрын
Hehehe not mirrored. Exactly the thing I would do. End product looks great. I think your ink pad is a tad dry.
@CraftableThings
2 жыл бұрын
Hey Barb 💕💕! 😂😂😂 Just a hot mess! I just opened that ink pad. It's worst than my old pad.
@casswms
Жыл бұрын
I have to subscribe! You are having fun and using your xtool. I am struggling and kind of dislike it at this point. I spent alot of money on this tool and I have been disappointed. Hopefully I can learn from you.
@ysbelbella6674
2 жыл бұрын
I use laserbox. How do you mirror the image?
@chrisciraldo4935
11 ай бұрын
If you learn from Others mistakes their mistakes where part of the educational process
@UNBIASEDLLC
2 жыл бұрын
Congratulations Ryan
@dandee28
Жыл бұрын
i love your channel! i just came across and it has so many cool things to learn
@cassandrareed5959
2 жыл бұрын
Still came out good even though you forgot to mirror 😅
@welcometoanewlo1618
Жыл бұрын
omg I thought you meant 'mirror' when you reverse the +/- on the engraving, then I had to watch the whole video to see the omg at 12:45 haaaaa done the same thing 100x
@KissingCats
6 ай бұрын
12:47 😂 i was waiting for it 🫶
@dakarichrissy
2 жыл бұрын
I use double sided tape for my stamps
@CraftableThings
2 жыл бұрын
thanks for the tip, Chrissy1
@dakarichrissy
2 жыл бұрын
@@CraftableThings anytime.
@starlabunkley8483
2 жыл бұрын
Congratulations Brian
@taniarobledodiaz5374
2 жыл бұрын
How to do the technique of inverting everything?
@CraftableThings
2 жыл бұрын
which design software do you use?
@taniarobledodiaz5374
2 жыл бұрын
Canva for design, and laserbox basic for make
@TheBestUni
2 жыл бұрын
Yessss
@walterhynson2898
Жыл бұрын
STOP using the laser without forced fan exhaust or YOU WILL PAY WITH YOUR LUNGS MASK or NOT.
@blackbeton3923
2 ай бұрын
Everything, is off, disorganized et not prepared 😅, but I enjoyed this video though, nice energy 👍🏻👍🏾
@MKCraftsandFamily
2 жыл бұрын
I so need to get some stamp stuff!! The XTool is so awesome!!
@CraftableThings
2 жыл бұрын
I know that you'll do waaaaay better than me 😂😂😂💕💕
@cratlyecommercepvtltd711
8 ай бұрын
Can we import this in india
@jackiebodner8452
Жыл бұрын
Thank you for making this video. Love the stamp you made. Any chance you could share the settings guide? My xtool sample pack didn't have one included and they don't have it on the website. When I call the help line, I get voice mail...grrr.
@monarnyc
Жыл бұрын
You are truly talented
@LucyLu70
2 жыл бұрын
Congratulations Brian 🎉
@rosanne7804
2 жыл бұрын
Congratulations Brian Kidd! 🎉 @Patrice, so you think two passes was equate for the stamp or will you do three?
@CraftableThings
2 жыл бұрын
Hey Rosanne! I’ll do three for the next one…my mind is set on three.
@captainkiddoregon
2 жыл бұрын
I caught this video not long after it was posted. I haven't received a confirmation yet so I am not 100% sure that I am the Brian that won. Hopefully so. When she first said Brian... I was like what did she say? Then she said my last name and then I thought uhhhh could that really be me. Then my name came up on the screen. But it is still a possibility it is another Brian.
@rosanne7804
2 жыл бұрын
@@captainkiddoregon I thought Patrice @Craftable Things said there were only 12 eligible winners. I can’t imagine there being two people named Brian Kidd in a group of 12 people. Good luck!
@captainkiddoregon
2 жыл бұрын
Sorry for the late reply. I want thank Patrice and xTool again. Everything has been sorted out and I received my refund for the whole order. This is probably the best drawing I ever won. Laze on!
@TheBestUni
2 жыл бұрын
Who u know
@CraftableThings
2 жыл бұрын
💕💕
@MsNeneDesigns
2 жыл бұрын
Is the xtool on the same level as the glow forge?
@CraftableThings
2 жыл бұрын
they are different types of lasers. The Glowforge is more powerful and the xTool has the rotary attachment, which can't be done with the GF.
@fjordhestfarm8667
Жыл бұрын
Also what is the thickness of that rubber?
@franchastermcwilliams3611
2 жыл бұрын
I’m stuck in the room with Covid I can’t play with my M1 🥺 just waiting of craft and talk
@CraftableThings
2 жыл бұрын
💕💕💕
@netwrkops
Жыл бұрын
You got me wanted to spend money ma’am
@UNBIASEDLLC
2 жыл бұрын
Hey Queen
@CraftableThings
2 жыл бұрын
Hey Queen 💕💕💕
@TR-lk2ts
2 жыл бұрын
The discount code is not working
@silviagarza8328
2 жыл бұрын
How long will the discount be available?
@chrisciraldo4935
11 ай бұрын
Why not just engrave the wood with your laser with the file
@MsNeneDesigns
2 жыл бұрын
Hello craftable things an group
@CraftableThings
2 жыл бұрын
Hey Ms. NeNe!!!
@zingme1965
Жыл бұрын
Press down harder.
@TshirtChick
2 жыл бұрын
👀
@CraftableThings
2 жыл бұрын
💕💕💕💕
@eddisonbahaw504
2 жыл бұрын
Looks easy enough to use but I want to make stamps as a business and that wait time is kind of long, is there another model than can do it faster?
@marilynwong9784
Жыл бұрын
Did you ever find a faster way to make rubber stamps?
@eddisonbahaw504
Жыл бұрын
@@marilynwong9784 yeah I bought an Aeon Mira 7 co2
@jvjv7085
2 жыл бұрын
💕
@CraftableThings
2 жыл бұрын
Thanks for watching! JV JV
@chrisciraldo4935
11 ай бұрын
Your y axis doesn’t sound good at all sounds like it’s binding
Пікірлер: 90