Thank you so much, this helped me out a lot! Liked and subbed👌
@retroworksarcade323
Жыл бұрын
Glad it helped you out! Thanks for subscribing!!
@fabulousasia9848
2 жыл бұрын
Nice tips!
@retroworksarcade323
2 жыл бұрын
thank you! I'm glad they helped.
@derpmellow2
3 ай бұрын
4lb spring makes my carpel tunnel flare, stock ones are 2lbs i find thats best, but i do upgrade them to nicer 2lb springs because they are like 1$
@KeithKillingly
2 ай бұрын
I got a 6lb spring and think I made a mistake lol. I thought it’s what I used to use. 3 games and my hand is fried
@derpmellow2
2 ай бұрын
@@KeithKillingly 2lb is def better then 6 lol, i think like 2.5-3 pounds would be sweet spot, but 4 was for sure to much, and 2 is for sure to little
@AvnerRosenstein-ULTRA-LXV
11 ай бұрын
The problem with adding different springs to the stock arcade1up sticks is good luck getting them out if you want to use the same springs in a new sanwa lol. I did this with my arcade1up sticks and honestly I didn't think it was that much better. Bought genuine Sanwa sticks instead and when I decided to take the 6lb springs back out of the stock sticks...it was impossible. I had no trouble putting the 6lb springs in the stock sticks but so much trouble taking them back out that I actually broke them in pieces to get the springs out. They're way more durable than what people think. Sanwa's are so much easier to deal with regardless. The little pin that holds the actuator on in Sanwa's are bigger and easier to remove/install than the Stock Arcade1up sticks. The stock Arcade1up pin's suck bad!
@ingarni654
2 ай бұрын
excelente video , la verdad si me falta un resorte mas fuerte y mas jugado teken 8 , la bolita es diminuta y para rematar el resorte pierde resistencia tan fácil que al estar haciendo movimientos que sueles hacer ya no se siente esa resistencia a como era nuevo , saludos desde México
@darth-umbrex
Жыл бұрын
After trying out a 2lb spring I would love a 1.5lb spring right in the middle.
@wiggygfe
9 ай бұрын
Just give the stock spring a bit of a stretch, works a treat.
@RedRanger2001
2 жыл бұрын
Some people just buy either the LS-33 or the LS-55 spring and put it inside the JLF spring...
@retroworksarcade323
2 жыл бұрын
Good tip.
@MichaelHarto
Жыл бұрын
4 lbs is too strong, it's going to wear down your pivot and silicone grease fast. 1.5 - 2 lbs is better.
@user-me7wp8zo3e
8 ай бұрын
Bullshit, the pivot takes ages to.wear
@dragborn926
5 ай бұрын
You can get titanium pivot
@MichaelHarto
5 ай бұрын
@@dragborn926 it's even worse, the force of the spring will wear down the pivot housing. You want your pivot to be softer than the house, when friction happens the pivot material will wear out slowly.
@dragborn926
5 ай бұрын
@@MichaelHarto use titanium and silicone grease. Many people swear by this
@dragborn926
5 ай бұрын
The force of the spring reduces over time with use
@wahidulsagor8884
4 ай бұрын
so if i want to loose the joystick handle than what can do?
@alvinkim1305
2 жыл бұрын
Did they have different tension springs in the very first Fighting game arcade cabinets?
@retroworksarcade323
2 жыл бұрын
I'm not exactly sure when these different tension springs came out for Sanwas but maybe they did.
@nobodytonobodysbusiness
Жыл бұрын
@@retroworksarcade323 From what I understand, no - people learned to play on a JLF or an LS-32. The spring swapping came much later on when the home market for sticks took off.
@lazyboy1042
2 жыл бұрын
Is 4lb spring more reliable than 2lb
@TexasHollowEarth
2 жыл бұрын
Yes. All springs become softer after getting broken-in. 4lb springs feel nice after breaking-in. 1 & 2 lbs get too loose for my liking. I prefer an American-style stick, feel.
@ignignxkt
Ай бұрын
What's your website? Can't find you.
@retroworksarcade323
Ай бұрын
So sorry, I have to set that up. I do not have a website yet, but you can find me on Instagram under the same name "retroworkskustoms"...🙂
@ignignxkt
Ай бұрын
@@retroworksarcade323 Alright thanks, I'm not on instagram.
@ahra_1970
Жыл бұрын
Ha ha ,no good for wade dash ,for tekken.
@PharoahsKingdom
Жыл бұрын
That's what Korean levers are for...
@reng.2588
9 ай бұрын
@@PharoahsKingdomsprings and grommets work differently though. This 4 lbs one is hella stiffer than a grommet
@SlickRick4EVER
2 жыл бұрын
Not to be THAT guy, but you called the restrictor gate an actuator at the end. Letting that pass, you did a great job!
@rh6368
2 жыл бұрын
I'm so glad you were able to that pass, I bet it means so much to him that you could take time out of your day to correct his minor slip.
@SlickRick4EVER
2 жыл бұрын
@@rh6368 - what troll’s snott did you get out from?
Пікірлер: 35