for anyone struggling with what he did at 2:25: you need to select one vertex with right click, then select another with shift + rightclick and then press M on your keyboard and select At First. took me a while to figure out so hope this helps someone
@HyenaTheRealest
Жыл бұрын
this confused me even more how the hell did you select with right click 💀
@bal7ha2ar
Жыл бұрын
@@HyenaTheRealest just right click on the vertex you want to select
@jellojellyjaw
Жыл бұрын
do you mean left click?
@bal7ha2ar
Жыл бұрын
@@jellojellyjaw was right click for me
@timytprodigy
Жыл бұрын
@@bal7ha2ar it just set my 3d cursor to the spot i was clicking
@SonicSyndicate13
2 жыл бұрын
Just go ahead
@electro5175
Жыл бұрын
😂
@BizKit167
Жыл бұрын
The amount of times he said that in the video 🤦🏻🤦🏻🤦🏻
@vermylemon
Жыл бұрын
I can’t get through this video now 😭
@lilatvgamers7348
11 ай бұрын
Go ahead mr. Joestar!
@sepben7555
11 ай бұрын
@@lilatvgamers7348Jjba reference 😱
@Grace23142
2 жыл бұрын
for 3:36 just press A in edit mode to select all and then press F to fill in the spaces. No need to do it individually. And you also dont have to link the vertices together by pressing F.
@yes8807
2 жыл бұрын
I see Thanks for the tip
@karolkocon35
2 жыл бұрын
@@yes8807 ot just make one poly and than select one edge and by pressing F fill every poly :D
@rat1170
2 жыл бұрын
OMG THANK YOU SO MUCH, saved me so much time!
@Grace23142
2 жыл бұрын
@@rat1170 No problem. Time is money.
@voidchess934
Жыл бұрын
I mean you are right but if anyone is using it for stuff like Roblox studio you need To do his steps because it will not render properly if you use this trick
@amygillespie9992
2 жыл бұрын
take a shot every time he says 'go ahead' :D loved this tute! tysm!
@bgvideo100
2 жыл бұрын
My eye started twitching around 1:30
@starsown
Жыл бұрын
Hey Kingkade. I just wanted to say that this tutorial literally taught me everything I needed to know to get started with modeling. I have been using Blender for over a year now and I have made tremendous progress. This is literally the only Blender tutorial I have ever watched because it was the only one I needed, everything else I just found out as I ran into problems or a need for a certain tool. I literally recommend this tutorial to every friend I have that develops an interest in modeling. Thank you for uploading this and kickstarting my modeling career.
@graphicnexus8662
Жыл бұрын
I agree. This was honestly all I needed.
@feralferal-qi6yt
11 ай бұрын
Same here. Thanks mate
@_zmister
19 күн бұрын
I used this tut to make a sword from jjk the one toji used and it was perfect i followed the tut and everything thank you so much
@kaipervan
Жыл бұрын
amazing tutorial and really well put together, I got everything on the first go and really didn't have to go back and pause or etc. as a complete beginner this truly helped.
@AniArii
Жыл бұрын
At 6:35 When he says scale with the thing you press E after u have it at the size press and its longer press S the the shape it or R rotate it alittle!!
@jj_peppapig
11 ай бұрын
press e
@JakeDRavioli
Жыл бұрын
This literally helped me through my game design course. Thank you so much.
@Hassaan_Productions
8 ай бұрын
I learnt alot from this tutorial and used the same method to make a 3D dagger. Very informative and simple to follow. Keep it up!
@TheGamingChad.
Жыл бұрын
It's always random unpopular individuals making the best tutorials.
@RBScripterBoy
17 күн бұрын
you fr managed to teach me something in 10 minutes that i have been strugeling on for the past 3 years. Subbed!
@Omnivoid22
6 ай бұрын
2 year old vid has taught me a lot. well done sir
@wxule
9 күн бұрын
guys what do I do? when im clicking I and trying to put another dot(or whatever is it) it simply just disappears. buttons I'm pressing: 1. I 2. (after scaling) enter
@bizaare3607
Жыл бұрын
5:00 how does he make the blade???? I press s & z AND s & x and both of them just make the dull blade bigger.
@Y4N970U
Ай бұрын
4:54 You can hit Shift+Y after pressing G so you scale with both X and Z axis uniformly
@Ooga_OnYT
Ай бұрын
ty, this helped me with making swords for roblox studio :D
@AlonePirate02
Жыл бұрын
Using Blender is so goddamn hard. I'm used to Unity's controls and this is making me literally rage. Thanks for the tutorial tho.
@Jonrocks7
17 күн бұрын
I think sea of thieves needed this video when they made a sword i worked hard to get CROOKED
@frankfrisk4219
2 жыл бұрын
6:38 how did he make more vertices? EDIT: He pressed E to extrude the vertices
@danielandrade7675
2 жыл бұрын
thank you very much, I spent 15 minutes clicking on various things but it wasn't, I went to the comments and found yours, it helped me a lot, man, you are a god, what a relief!
@bingpous
Жыл бұрын
Thank you
@thenuub8159
Жыл бұрын
thank you
@cuxioo
Жыл бұрын
How did he like pull it to make it smaller or bigger?
@danniyoo
Жыл бұрын
This helped me a lot, basically starting my 3d modelling career here 😊
@taneltee4982
5 ай бұрын
idk why but i just ''love'' the tutorials where people do something that they dont tell in the video how to do
@scottsedor9155
2 ай бұрын
Thanks for making this tutorial. I'm new to Blender, and I found this to be very helpful.
@dookie7299
2 жыл бұрын
Thank you so much. This will work for any sword/ weapon i wanna make. Very helpful!
@theboys6927
Жыл бұрын
Great tutorial. really helped me with my modeling skills in blender (8/10)
@JackBuilds-iu1lg
14 күн бұрын
oh my days this is good vid
@RETROGRADIYA
2 жыл бұрын
Awesome Guide ! i`am simple begginer blender user - and I understood everything the first time , You a good teacher thank you)
@smokybacon395
Жыл бұрын
How do you get the Vertice on the sword image
@rubyinsta108
Жыл бұрын
I bet his favorite word is let's go ahead
@m0ggyP
7 ай бұрын
this vid is epic
@DevinOfBacon
Жыл бұрын
"Go ahead and- Go ahead and- Go ahead and- Go ahead and- Go ahead and- Go ahead and- Go ahead and- Go ahead and- Go ahead and- Go ahead and- Go ahead and- Go ahead and- Go ahead and- Go ahead and- Go ahead and- Go ahead and- Go ahead and- Go ahead and-" - Kingkade 3D, 2021
@strangersun7721
2 ай бұрын
I just went ahead and made the sword. Thanks for the video!
@user-uu9fu8xh2e
2 жыл бұрын
Nice tutor, but if exit tab and create new meshes in object mode it can be easier and you can pick texture from blenderkit on every part
@Trisodin529
2 жыл бұрын
Very good tutorial, this saved me lots of time, thanks.
@rllyshyguy8766
3 ай бұрын
i keep having a problem with the extrude part, if i extrude to the right , the model becomes empty on the left side
@noblejesse
Жыл бұрын
Thank you, I tried this a few days ago but gave up, trying again it was very easy! now I just have to find out how to colour it 😁
@brandonwalker5970
Жыл бұрын
keep in mind there is so many more things you will have to do to this sword if you want to export it to unity..ONLY IF YOU USE SMOOTH SHADING it messes up the backface culling and shadow transparency once exported to unity..even if you bake the uvmap the issue will remain.if you DONT use smooth shading then you will have no issues whatsoever so as long as you have done everything else right.
@sebaaag441
Жыл бұрын
how do i reverse smooth shading
@m___motion5976
Жыл бұрын
Shade flat maybe? Or try a remesh modifier,
@brandonwalker5970
Жыл бұрын
Just an update so I figured out my issue..forgot to solidify lol
@zudethofficial9579
Жыл бұрын
Shade auto smooth and mark your sharp edges the auto shade and sharp marks are normal data and will be stored in the fbx file and the game engine will utilize these this is also why you triangulate your model before you export to game engine so you know how it will look first and can make changes
@PhoenixAscension554
9 ай бұрын
@@zudethofficial9579 4 months ago but this is for others, its a good habit to select all your parts once you are done, and go into edit mode, press A, now you should have selected every single part of your model but in edit mode with every face selected nothing left out, then shift + N to recalculate normals, don't use inside. this will help with the exporting process.
@IndianaFeve
3 ай бұрын
10:00 the ''normals'' setting is no longer there -_-
@crowandraven2133
Жыл бұрын
Thank you very much for making this so idiot proof that I won't have any issues. Honestly I wish more tutorials are done in this way, than what you see everywhere else.
@tonynk1705
Жыл бұрын
i have an issue with doing the loop cut, it doesn't do it on the whole blade it only does it on the top of the part of the blade pls help
@-TBH-
7 ай бұрын
You probably have extra vertices or edges hiding on top of one another. Really sneaky stuff. That was my issue at least. Just try moving your vertices around where the loop cut stops by manually clicking on them (and not box selecting). Or delete all your edges and start over like I did, which fixed it. There's probably a better way of doing it floating around the Internet though. Just leaving this out here for those who need help.
@noshanetoussaint4749
7 ай бұрын
This tut IS SO USEFULL i subbed to u straight away and put on all notifications
@thesharpeinator
2 ай бұрын
I cannot get loop cut to work. It keeps going horizontal instead of vertical
@user-bm7kp3ef5q
6 ай бұрын
W mans ty of tutorial now I can successfully start my roblox job and you earned yourself a new subscriber
@v0xzplayz20
2 жыл бұрын
BRO tysm this helpend 100% now i know how to make a sword for my game u are a very good youtuber ty for the help:))
@justrad7637
Жыл бұрын
10:28 how did u smoothen it , i dont see that option anywhere
@derpysnakemusic3676
Жыл бұрын
Bevel tool appears in edit mode.
@thefaultygamer97
Жыл бұрын
Amazing content, only problem I had was that I could not see the buttons you pressed for the majority of the video.
@Hovarcraft
7 ай бұрын
Thank you so much 10/10 tutorial tbh
@catsoberno7416
Жыл бұрын
One day I came cried about how hard it was then today I came back and made the blade and stopped. A step closer to become better at blending
@DissoRoblox
4 ай бұрын
i made a shovel with this.
@Joe_334
Жыл бұрын
I will never have to ask for permission. I will just go ahead.
@spookythunder.
3 ай бұрын
Lol
@Dat_MrBlack
2 жыл бұрын
how did you still have 72 subs? this tutorial is amazing and you deserved more
@V1ZUALWARL0CK
Жыл бұрын
im stuck around 4:25 because it wont go down the middle of the blade i just created. if someone can help me out asap let me know please, im really trying my best to get around this shitty user experience im having the first time using this program.
@V1ZUALWARL0CK
Жыл бұрын
if i could just have someone make this sword for me i would, i really hate the interface and the controls so far ill be honest, but i gotta get used to it. i just want to make mods for blade and sorcery, i have so many ideas to create.
@timytprodigy
Жыл бұрын
i can totally relate with you, i cant help but this was a year ago which means it was a older version, maybe thats why
@CasterRational
Жыл бұрын
Fr same
@Mega_Master
Жыл бұрын
Thank you so much for this tutorial this helped so much
@holospade30
7 ай бұрын
Uh slight porblem. When I press S and then X on my blade, it just makes it look deformed.
@TheAbortionWhoLived
2 жыл бұрын
Outstanding, but let us now see if it can withstand... the kill test!
@Nubbley
2 жыл бұрын
can you do a follow up video on how to texture this specific sword? i followed your instructions, completed my first sword, and now im trying to texture it and its just not working.
@mariuscomorasu6026
7 ай бұрын
6:33 White on white didn't made it easy to read so could anyone tell me what he used to make the handle larger?
@jacobgoff4752
2 жыл бұрын
This tutorial is awesome! Keep up the great work! Adult learner here learning Blender. Thank you for helping the community learn the program! I subscribed!
@moo_berry
Жыл бұрын
super helpful, thank you!
@itzebuddy8762
6 ай бұрын
this video was amazing
@insertnickname-qv2iy
Ай бұрын
how did bro move camera up when he hold middle mouse button which make your camera rotate around model bruh, ty for not explaining that thing
@prostihrsecke7308
2 жыл бұрын
very nice and simple tutorial keep it up bro liked!
@Loads100
Жыл бұрын
Awesome vid u earned urself a new subscriber
@ssstickman6183
Жыл бұрын
Which blender version is this?
@jamesbiggums8723
2 жыл бұрын
Very good tutorial. I am sharing this with my friends.
@kerozenn-0
3 ай бұрын
i think he wants us to go ahead
@mrak_khan2922
28 күн бұрын
6:59 what button does he use to change the size of the thingys
@SonuKumar-fm3jn
2 жыл бұрын
👍thanks, it was easy and effective.
@Demise035
Жыл бұрын
how do you make the vertices straight mine sometimes stick out or in
@fatman5706
2 жыл бұрын
Wow looks nice and that was fast.
@mooshu96
9 ай бұрын
really helpeddd, ty
@MOADMAXO
3 күн бұрын
Ty so much
@MrbluezV
6 ай бұрын
at 2min 6 sec how those he make it so a line and when i click E it only goes straight but as for his he can bend it im lost:(
@that1evilchicken
5 ай бұрын
It’s good but OH MY GOD YOU GO SO FAST
@Fluxxzye
5 ай бұрын
i had to re watch 3 times... but still bro amazing tut i just didnt know how to do it properly
@Foxsquadyt1
Ай бұрын
i hate a question do you have to like connect each part at the end
@aksway5303
Жыл бұрын
Whenever I try to do the loop cut it never goes in a straight line down the blade? I need help
@KLIPS666
Жыл бұрын
when you select the loop cut do not move your mouse at all and just click left mouse click and it should automatically be in the middle
@krislawcy
2 жыл бұрын
Oh, I goodly want to hear so!
@christianpronk9773
2 жыл бұрын
Thank you for creating tNice tutorials playlist in soft soft, just starting out in soft production and there is so much to learn
@user-ev5lh1eg3q
Жыл бұрын
hear is the sword script tool = script.Parent debounce = nil function Attack() if debounce == nil then local anim = tool:WaitForChild("Animation") local humanoid = script.Parent.Parnt:WaitForChild("Humanoid:) local animTrack = humanoid:LoadAnimation(anim) animTrack:Play() debounce = true wait(0.9) debounce = nil end end tool.Activated:Connect(Attack) tool.Handle.Blade.Touched:Connect(function(hit) local player = game.Players:GetPlayerFromCharacter(hit.Parent) if player and debounce == true then player.Character:WaitForChild("Humanoid").Health -= 3 end end)
@jj_peppapig
11 ай бұрын
what does this do?
@PhoenixAscension554
9 ай бұрын
@@jj_peppapig a weird script that makes your tool deal damage if someone touches the blade. no animations so...
@MasterWarrior557
2 жыл бұрын
Helped me so much . Tysm.
@BANANA-nh7gm
2 жыл бұрын
Im having trouble at 4:35, whenever i try to place the line it just becomes a tiny dot . Any help would be usefull ty
@peterbigone9908
Жыл бұрын
same
@GoldiePlays69420Gp
Жыл бұрын
i am really struggling with these tutorials idk why i do have like terrible adhd and i have autism holding me back but im atleast somewhat medicated for the adhd right now idk it may be because ive been up all night tryna learn stuff cause i wanna make a roblox game
@Foxsquadyt1
Ай бұрын
quick question how can i curve the handle?
@parrissatchison6273
2 жыл бұрын
Bro help please, “At First” isn’t appearing when I do merge vertices
@yeah-8492
2 жыл бұрын
Click a dot, left-shift click another dot. Then , it should be there
@danielb.2873
Жыл бұрын
Nice tutorial. Go ahead.
@TheRealLighterYT17
8 ай бұрын
Ok i made the sword and everything but question, how do you put the cylinder were you want it, as the hilt? its just spawning right above the blade for me and i cant move it
@TheRealLighterYT17
8 ай бұрын
oh nevermind i found out how to move it lol, im kinda like REALLY REALLY REALLY new at this, infact its my first time on blender and i think it turned out pretty darn good ty for the help!
@SenorCoconut10
4 ай бұрын
4:41 for some reason it wont do the whole blade for me and some parts won’t select
@0zyxk
3 ай бұрын
did you find out how to fix it
@jonnapedersen8977
4 ай бұрын
i am going to train an AI to delete "you're just gonna just go ahead and" from blender tutorials and it will be the first good thing AI has ever done
@spacycornot
Ай бұрын
Somehow i cant select vertix
@gionottoli272
2 жыл бұрын
Amazing tutorial. However, how were you able to scale and add at the same time?
@starskull8587
2 жыл бұрын
this helpful asf thank u
@Feaze-
2 жыл бұрын
nice tutorial but does anyone know how to select more dots after you have already selected the first 2 at 1:29
@Feaze-
2 жыл бұрын
:edit i know now but how do i drag the small orange dot to the tip now?
@jaydenradtke9584
Жыл бұрын
Struggling with this as well
@icy5510
Жыл бұрын
same i dont know how to
@jellojellyjaw
Жыл бұрын
Shift+Leftclick
@jellojellyjaw
Жыл бұрын
@@Feaze- you take the dot and press G then drag your cursor without clicking anything to the tip of the blade. Hope this helped
@ThrillerXero
7 ай бұрын
Can you show us how to texture the model?
@rabbox4513
Жыл бұрын
take a shot every time he says "go ahead"
@berriboi1903
2 жыл бұрын
hey uh, im trying to create a sword with an empty spot within it, how can i do that? whenever i reach the F part, it just gets filled in with the hole in some part too.
@aura9145
2 жыл бұрын
build around it or negate
@berriboi1903
2 жыл бұрын
@@aura9145 thanks
@aura9145
2 жыл бұрын
@@berriboi1903 welcome
@bjarkebuskbjerg743
Жыл бұрын
10 mins of "go ahead"
@miguelbatista8183
9 ай бұрын
when i try to scale the line in the midle to sharpen it it bugs and acts as i am moving it
@mr.shielder8318
Жыл бұрын
underrated
@scrollwithme9357
2 жыл бұрын
Ultimate TIKTOK Dance Compilation! Best TikTok Dances trends of 2022! 💃 - KZitem
@venom_fruit771
Жыл бұрын
How do I make the plat sit straight it moves the reference around but not the plat
Пікірлер: 358