Hi Cassie I’m loving your videos and tutorials and I was wondering what it is you use between the acrylic rounds when you send them, looks like tissue paper but I’m not sure. Many thanks
@CassieCouncil
Жыл бұрын
Thank you Tracy! It’s parchment paper! I cut it down to 4x4 inch squares ❤️
@Ashley-zc5en
Жыл бұрын
When you paint - do you do multiple coats when you paint the whole round? If I do one or two, it looks good unless I hold it up to light and then you can see the brush strokes. Not sure If I should keep going until it is totally opaque? Also, if you get some paint on the edges...do you go back and scrape it off? Thank you for teaching! Your videos are so enjoyable.
@CassieCouncil
Жыл бұрын
Thank you so much! ❤️ I usually do 2 coats! I also use really good, thick paint and that helps a lot too! I use the brands Folkart and Valspar. For the paint on the edges, I just use my fingernail or a sharp edge of scissors to gently knock off any paint there! I hope this helps!
@Ashley-zc5en
Жыл бұрын
@Cassie Council Thank you! I ended up just binging your videos yesterday and learned so much. Your videos are so relaxing. I really enjoy watching your process!
@Trending_Wor16
2 жыл бұрын
Do you recommend making sample acrylic signs or use pictures of similar items to market what your business will sell?
@CassieCouncil
2 жыл бұрын
Hi Nicolette! I would say to always make sample items if you can! It gives you practice at making that item and then you can take beautiful photos that will be original to your shop only! Thank you for watching! ❤️
@valentinamarsden9981
Жыл бұрын
Thank you! Going to do it for a friend! Do you not have to seal the paint at the back?
@CassieCouncil
Жыл бұрын
Thank you! I hope it turns out great! Yes, you can seal with Polycrylic!
@afrozamaster949
9 ай бұрын
hey there could you please advice me on how to bring both the words together using the attach button on the bottom right because when I try doing it ,it doesn't merge.
@CassieCouncil
9 ай бұрын
Hello! Try using the weld tool ❤️
@heatherrock6020
Жыл бұрын
Does the vinyl go on the painted side, or the other side? Thanks
@CassieCouncil
Жыл бұрын
Hi Heather! The paint goes on the back side and the vinyl goes on the front! I hope this helps! ❤️
@heatherrock6020
Жыл бұрын
Thank you!
@nemizejeftha7775
Жыл бұрын
Do you sticker the vinyl directly.on the painted side or the side at the back (where u removed the protective layer)
@CassieCouncil
Жыл бұрын
I apply the vinyl to the unpainted side (the back)!
@phoebericafort525
Жыл бұрын
What type of vaspar paint did u buy?
@CassieCouncil
Жыл бұрын
I bought the Valspar paint sample in the color Hopsack!
@KellyStevens-yv5jn
Жыл бұрын
Hi, what do you seal the paint with?
@CassieCouncil
Жыл бұрын
Hello! I use Polycrylic!
@robynjinkins8314
2 жыл бұрын
Beautiful! Do you recommend adding a coating to the paint to keep it from scratching? I love these so much!
@CassieCouncil
2 жыл бұрын
Hi Robyn! You can totally add a thin coat of polycrylic to the back to keep the paint from scratching! Thank you so much for watching! ❤️
@robynjinkins8314
2 жыл бұрын
@@CassieCouncil thank you! 🤗❤️
@moniquekalook
Жыл бұрын
@@CassieCouncil Hello!! do you think mod podge would work the same also?
@CassieCouncil
Жыл бұрын
It might! I’ve never used Mod Podge before, but I have seen others use it! It’s definitely worth a try!
@melodievaillant3155
2 жыл бұрын
Which transfer tape do you use?
@CassieCouncil
2 жыл бұрын
Hi! Here is the link! amzn.to/3yJQwAr
@imanitraylor2093
Жыл бұрын
Thank you for the video. Approximately what width and height did you make your fonts?
@CassieCouncil
Жыл бұрын
Of course! Most of them are a little less than 3 inches (width) by a 1.5 inches (height). It really does depend on the length of the words though!
@sarahestill8835
Ай бұрын
Did you mix the paint into the modge podge?
@CassieCouncil
Ай бұрын
Hi! No, always layer them and let the paint fully dry before applying the clear coat! I use polycyclic!
@jenniferdudley5443
Жыл бұрын
Cassie you have inspired me to try my hand at using acrylic blank.! Thanks so much for this fantastic video!
@CassieCouncil
Жыл бұрын
That’s amazing! Congratulations! Of course! ❤️
@apz232
10 ай бұрын
Can you only use acrylic paint?
@CassieCouncil
10 ай бұрын
I've only used acrylic paint, but I'm sure other types of paint are worth a try as well!
@tasleemshah9012
Жыл бұрын
Which setting did you cut on?
@CassieCouncil
Жыл бұрын
I use the permanent vinyl setting ❤️
@xionglm87
Жыл бұрын
Do you need to seal the paint in the back from chipping?
@CassieCouncil
Жыл бұрын
Yes! I seal with Polycrylic!
@xionglm87
Жыл бұрын
How do you seal it without it getting streaky? Do you only seal the paint side?
@CassieCouncil
Жыл бұрын
@xionglm87 yes! Only seal the painted side!
@xionglm87
Жыл бұрын
@@CassieCouncil ok thanks! How do you seal it without showing streak lines?
@jennr591
3 ай бұрын
Hi Cassie! I just found your videos and this is SO helpful, you have no idea. Do you have any other videos up where you paint the full side? I've been struggling with this with (a) making a mess and (2) not getting a full gloss effect and wondering if you had anything up already that I might have missed. Thank you!
@CassieCouncil
2 ай бұрын
Thank you so much! I do have a few work with me videos where I paint the entire side! My most recent video does have a set where I paint the entire side if you'd like to check it out! ❤️
@sukijones6956
Жыл бұрын
Hi Cassie, are these intended for use when photographing the baby at each of the monthly milestones? If so, how or where would you suggest they be displayed? Thank you!
@CassieCouncil
Жыл бұрын
Hello! Yes, they are intended to be used as photo props for baby photos each month! They can also be used during pregnancy to document month by month! ❤️ I’ve seen most people just lay them next to the baby and take a photo or have the baby hold it!
@missychase627
Жыл бұрын
Hello! Do you skip sealing the painted surface? Is it not necessary?
@CassieCouncil
Жыл бұрын
Hello! Yes, I seal with Polycrylic! ❤️
@emimari4184
Жыл бұрын
Hi! I currently bought a cricut maker and i wanted to know what blade did you use
@CassieCouncil
Жыл бұрын
Hello! I use the premium fine point blade! It’s just the regular blade that comes with the cricut!
@jessicaort3ga
Жыл бұрын
Hi loved this tutorial! you explained everything so well, I'm going to start off by making little circle keychains. Just had a quick question did you pay for those fonts separately? I have Cricut design space and can't find those fonts. and I loved them!
@CassieCouncil
Жыл бұрын
Thank you so much! I use Creative Fabrica for all of my fonts! I pay a monthly fee to access their site! I have a discount link for them in the description box if you'd like to check them out too!
@GoodVibesbyadelie
Жыл бұрын
tysm
@RebeccaBancarz
9 ай бұрын
Hello I followed all of the instructions but once I attached all of the numbers and months and clicked make it, it’s saying that my image is too large and to either continue with a larger mat or cancel, but I tried following all of the measurements for the fonts correctly. Do you know why it’s doing that? Thank you
@CassieCouncil
9 ай бұрын
Hi! You may need to move each of them closer together and click "attach" so that they will all stay in place when you're going to send it to the Cricut to cut. I put mine super close together to save on vinyl and it helps me cut more at one time! I hope this helps!
@RebeccaBancarz
8 ай бұрын
@@CassieCouncil thank you! I ended up figuring it out, I put them all in a square shape and then erased the square just to know how much space I have!
@hyun8282
2 жыл бұрын
Oh.. very good .🌻👍
@manetteb.8198
Жыл бұрын
How do you avoid it being see through after painting? And how to not see the steak of the paint brush?
@CassieCouncil
Жыл бұрын
I use high quality paint and do 2 coats! The brands I use are Folkart and Valspar! ❤️
@pamelasmallwood5722
Жыл бұрын
@@CassieCouncildid you use a flat, satin or semi-gloss paint?
@RebeccaBancarz
9 ай бұрын
Hello :) was that just one coat of paint?
@CassieCouncil
9 ай бұрын
Hi! I typically just do one coat of paint but sometimes if I am using a thinner paint, I will go back and do a second coat so that the brush strokes are not peeking through!
@RebeccaBancarz
8 ай бұрын
@@CassieCouncil thank you 🤍
@annpatt2273
Жыл бұрын
hi can I use spray clear coat on the back?
@CassieCouncil
Жыл бұрын
Hi Ann, I’ve never tried the spray clear coat but I’ve heard it’s great to try!
Пікірлер: 66