You did a great job. But, yes but. Etsy sells the stars in all sizes, and Amazon has a template for the stars to make the placement easier. They what I do. Oh one question. What size did you make the coffee n holder strip?
@natureboyricflair8555
3 жыл бұрын
You shoulda inlaid the stars 😜 😂😂
@CarolinaCraftsman
3 жыл бұрын
Ha! I’d still be working on it!
@TedH71
8 ай бұрын
Great video. Several things I wanted to point out. If you get a laser, you don't have to hassle with hand cutting the stars therefore saving your hands (carpal tunnel syndrome). I have a laser which works for me right now. I know I need a bigger one but have to pay off the smaller one. Please try to wear a dust mask when sanding and cutting wood. Working repeatedly with wood and being exposed to the dust can and frequently causes health issues. I also wear goggles because I'm deaf and don't want to lose what vision I have to something that randomly flies out to hit my face but I wear my face mask at all times. I discovered that I had health problems after working as a cnc operator cutting fiberglass and wood that was going to be turned into lightweight aircraft cabinetry. Severe sinus infections plus pneumonia once.....repeatedly. My doctor said I had an allergy so I was going to change jobs but my company got bought out for the assets and everyone was laid off. I had to wear a mask at work after being diagnosed with the allergy.
@denbartley2745
5 жыл бұрын
Good content please consider getting rid of the bad music. It’s distracting what you’re trying to show.
@CarolinaCraftsman
5 жыл бұрын
Thank you for watching!
@ofsoundmind2687
4 жыл бұрын
Holy shit man, I was in 1/94 with you! How can I get in contact with you man? I been starting woodworking and would be awesome to catch up!!!
@CarolinaCraftsman
4 жыл бұрын
Hey man! How you been? I was going to say hit me up on Facebook but you already did that lol
@l8ndadgmail
2 жыл бұрын
Tried the link for the plans but it is dead. Did you change links?
@hagpound
4 жыл бұрын
My goodness, the time involved for this. Both for the flag and the video editing.
@CarolinaCraftsman
4 жыл бұрын
Yes, it was a big project and took quite a while! Thanks for watching!
@124bucket
4 жыл бұрын
you can buy those stars at church house woodworks for about $3
@CarolinaCraftsman
4 жыл бұрын
Oh cool, I didn’t know about that company and just checked them out, thanks for the tip!
@furiousfurby
4 жыл бұрын
I use Dwood.net for some of my stars and depending on the size of your flag build he has a placing template for the stars.
@americanrusticworks981
3 жыл бұрын
Beautiful work!!! I make flags all the time and this gives me motivation to make one with exotic hardwoods for my living room!! Great video!
@CarolinaCraftsman
3 жыл бұрын
Thank you very much!
@mikelittle9143
4 жыл бұрын
I'm not sure which was better, your flag or video editing? Nice job all around!
@CarolinaCraftsman
4 жыл бұрын
Thank you!! I’m going to go with both were better so it’s a draw!
@egorbiletskiy2950
3 жыл бұрын
I have checked many woodworking plan sites. I think the instructions from Woodprix are the best.
@johncline3033
4 жыл бұрын
Great job, thanks for the hard work and not making us listen to electronic music!!!
@CarolinaCraftsman
4 жыл бұрын
Haha thanks for watching!
@willnichols5516
4 жыл бұрын
Um, you know you can buy pre-cut stars right?
@CarolinaCraftsman
4 жыл бұрын
Yes, but they aren’t the right size and where’s the fun in that?!
@furiousfurby
4 жыл бұрын
Beautiful work. I build scorched flags myself. Unfortunately, in San Antonio I’m limited to Lowe’s for my lumber and it’s either select pine, red oak, poplar or alder wood.
@CarolinaCraftsman
4 жыл бұрын
Thank you very much! I had to drive an hour and a half each way to get the wood for this lol, but it’s so much nicer working with good wood so it’s worth it
@TedH71
8 ай бұрын
You may have to look for speciality wood stores. They're in almost every town.
@macsgarage1014
3 жыл бұрын
Impressive!!! I went to your website but before i fill up some of my info i just want to ask how much for it. I just want straight to the point. Thanks!
@sergiothehandyman
5 жыл бұрын
Looks awesome, thank you for sharing.
@CarolinaCraftsman
5 жыл бұрын
Thank you very much!
@relwoodmusic3630
3 жыл бұрын
That looks amazing! I doubt I have the meticulous patience to cut out all those stars, but yours came out great.
@veterancustomwoodworx9858
2 жыл бұрын
Great job. But damn. Cutting the stars is crazy
@ThatCleanMT
3 жыл бұрын
Could have gone without the annoying music.
@Pogi_Konjo
2 жыл бұрын
How much would something like this go for?
@kentharris7427
4 жыл бұрын
If you make more then one flag you can get a CNC Router starting at $300. Your time is worth more than that.
@CarolinaCraftsman
4 жыл бұрын
They have $300 CNCs now?! Who’s selling them that cheap?
For $50 more you can get one with a Laser engraver
@CarolinaCraftsman
4 жыл бұрын
Oh wow, that looks pretty awesome. Thanks for the tip, I’ll definitely check it out!
@markarsenault14
3 жыл бұрын
OK video on what to do but without dimensions it is kind of useless.
@TylerWilliams-nk6gq
4 жыл бұрын
Just curious do the shelves stay very well with just glue?
@polynesianpineapple4358
4 жыл бұрын
Would like to buy one
@CarolinaCraftsman
4 жыл бұрын
Hi! Can you go to my website and fill out the request a quote form? Here is the link: www.carolinacraftsman.net/design-your-piece-1 Thank you for your interest!
@meaneydanielp
4 жыл бұрын
Nice work dude 👍👍
@CarolinaCraftsman
4 жыл бұрын
Thank you!!
@SFCLEast369
2 жыл бұрын
Absolutely gorgeous, great job
@CarterMedic8230
5 жыл бұрын
Great video
@CarolinaCraftsman
5 жыл бұрын
Thank you very much!
@egibbons76
4 жыл бұрын
What are the dimensions?
@CarolinaCraftsman
4 жыл бұрын
It’s 36” wide and 19 3/32” tall
@cyclemadness
4 жыл бұрын
What are the dimensions of the star? Looking at ordering the stars.
@CarolinaCraftsman
4 жыл бұрын
About 2 1/4” diameter
@josephgallick9213
Жыл бұрын
@@CarolinaCraftsman no there not that size would not fit on that size of a flag . they r probably one inch diameter
@chrisbaron6967
Жыл бұрын
I want this!
@mathewshoyt1763
4 жыл бұрын
awesome!
@CarolinaCraftsman
4 жыл бұрын
Thank you!
@kevinspringer8981
5 жыл бұрын
Awesome
@CarolinaCraftsman
5 жыл бұрын
Thank you!
@challengecoinstands1042
3 жыл бұрын
Shop envy!
@dunrob13
4 жыл бұрын
Glad to see no cnc, I build fully by hand and its always better👍 🇺🇸
@CarolinaCraftsman
4 жыл бұрын
Thanks for watching! I agree, handmade is more personal
Пікірлер: 62