How to make an ornithopter, a rubber band type flying machine that flies by flapping its wings.
This video was made possible in part by these Patreon supporters:
Jonathan Rieke
James Padden
Juliusz Wojtyga
Support RimstarOrg on Patreon www.patreon.com/user?u=680159
or make a one-time donation at rimstar.org/donate_support_rim...
Subscribe so that you don't miss new videos as they come out kzitem.info...
For the super sport rubber, I bought it on ebay.com but don't see it there anymore. I think that ultimately it came from here www.faimodelsupply.com/produc... . Alternatively, search on google.com for "fai tan super sport rubber".
Go to the main channel page here / rimstarorg
Step 0. Introduction 0:00
Step 1. Making the fuselage 0:22
Step 2. The two tubes for the wings to pivot on 0:47
Step 3. Making the tube for the crank and front rubberband hook 1:04
Step 4. Strengthening the front of the fuselage with cotton thread and glue 1:35
Step 5. Making the tail frame 1:43
Step 6. Making the rear motor hook 2:37
Step 7. Attaching the tail and rear motor hook 2:53
Step 8. Making the wing spars 3:03
Step 9. Making the crank and front motor hook 3:41
Step 10. Smoothing the ends of the hooks 4:36
Step 11. Making the connecting rods 4:42
Step 12. Making stoppers 4:55
Step 13. Attaching the wing spars and connecting rods 5:04
Step 14. Different types of tail and wing coverings 5:37
Step 15. Removing the folds in the tissue 5:51
Step 16. Marking and cutting the wing covering 5:59
Step 17. Marking and cutting the tail covering 6:28
Step 18. Attaching the tail and wing coverings 6:30
Step 19. Adding grease/lubrication 6:58
Step 20. Adjusting the tail angle 7:08
Step 21. Using office/household rubberbands 7:14
Step 22. Using special rubber (1/8" tan super sport rubber) 7:26
Step 23. Lubricating the rubber 7:34
Step 24. Winding and attaching the rubber 7:39
Step 25. How to fly it and adjust the tail 8:08
Step 26. Have fun! 8:22
On www.ornithopter.org/software.s... you can find a software tool called FlapDesign for designing the crank, connecting rods and wing spars that helps a lot if you're going to design your own.
See also:
Ornithopter - Rubber Band Wing Flapping Flying Machine
• Ornithopter - Rubber B...
How Ion Propulsion, Lifters and Ionocrafts Work
• How Ion Propulsion, Li...
Hand-Cranked Laser - TEA Laser Powered by Wimshurst Machine
• Hand-Cranked Laser - T...
Follow behind-the-scenes on:
Twitter twitter.com/#!/RimStarz
Google+ plus.google.com/1163951251362...
Facebook / rimstarorg
rimstar.org
Thanks to the Make613 gang at Makerspace North for all their support and in particular to Darcy (inventorartist.com) for his help with the rubber bands.
A Darker Heart - music by audionautix.com
Негізгі бет Ғылым және технология How to Make an Ornithopter (Rubber band type)
Пікірлер: 791