The type of bulbs needed for this project are called ballast bypass LEDs. If you find these bulbs in a big box store you have to buy 10 packs or larger (only two are needed). Go to EBAY to purchase bulbs in smaller quantities. Hope this helps!
@acu112
3 жыл бұрын
it's better to borrow than steal, you just don't tell when you're returning the borrowed item, any way love the creative light bar, looking forward to your next ideas.
@iamher6422
4 жыл бұрын
Eyyy, it’s Billy Joel!!
@elomeli211
4 жыл бұрын
Dead😅😅
@emmettturner9452
Жыл бұрын
I think I would’ve stacked 3x just because. :) Any way to convert these to 12v to run them off the car, M12, 12V Max, etc? I’ve always wanted one that worked with popular power tool batteries AND directly off an automotive/power sport/marine battery AND directly off AC power (It’s easy enough to find a 12v wall adapter). 12v definitely seems to be the way to go.
@ruinunes8251
4 жыл бұрын
Brilliant idea. I would use a connecting block to connect the cable to the pins. So no soldering used and no melting the light. I assume the pins are solid and hard enough so the screws inside the connecting blocks can screw straight into the pins.
@btrswt35
6 жыл бұрын
Believe it or not, I had a similar idea not to long ago. I'm glad to see you made a working light. It gives me more motivation to try it myself.
@ivlark1
6 ай бұрын
Kind of a long shot.. do you think they will work with a 12v source?
@BTL3.0
6 жыл бұрын
thanks for this. u saved me from spending much more then neccessary. just purchased 2 tubes for under $20shipped from ebay. cant wait to start this cool project.
@KelleyMobileDetail
6 жыл бұрын
Brandon what materials r needed
@ernestoalicea4594
6 жыл бұрын
Sweet ,, nice light ... that'll light things up under the hood 👍
@kylandaminick13
7 жыл бұрын
This is an awesome idea! Thank you so much for sharing. I was about to buy a $100 under hood work light.
@soonerjontheconservative636
Жыл бұрын
So how do you wire the electrical wire to the lights. N to N or N to L, That would be helpful to know.
@troy3456789
2 жыл бұрын
They're [the pair of lamps] are not drawing more than 40 watts total (2.8 amps) . You can easily use much thinner wire, such as 20 awg wire.
@joehyundaitech7961
6 жыл бұрын
hi grate video what a grate Idea thanks for this idea and saved a lot of money I subscribed I love the on and off switch very cool
@bayoubiker7834
5 жыл бұрын
well done. thanks
@hillarysucksass92
5 жыл бұрын
great job! well made video!
@michaelschneider4701
3 жыл бұрын
Very cool!
@KelleyMobileDetail
6 жыл бұрын
What materials r needed
@gregprevost7360
6 жыл бұрын
love your ideal what brand of tubes and where did those tubes ?I'm like you ,can't see shit.old age sucks!!
@nathanbennett9025
4 жыл бұрын
Thats bad ass I'm going to make me one
@theSword-
6 жыл бұрын
You should do a "build" video on how to do this because there wasn't any real info. here. Everything is covered up. Maybe take it apart so people can see exactly what you are talking about.
@AERuffy
6 жыл бұрын
He doesn't need to make a build video, solder two wires from a power cord to a LED tube.
@chipdoctorkent
2 жыл бұрын
Harbor freight has a decent one for 35 bucks
@treeroofgrass
7 жыл бұрын
cool!!!
@juliomurillo1543
5 жыл бұрын
Good idea but it's terrible way of doing that it's to big no need for that no cords no extensions use your own battery from your car I can show you how to do better
Пікірлер: 26