Bro I liked the Efforts taken for explaining that indirectly helped me Understand the Code
@slfishworld6043
Жыл бұрын
සුපිරි බන් 😍😍❤️
@Codecode707
11 ай бұрын
What a nice toturial bro keep it up , how about pant car watering robot bro? . Using arduino water pump and others its moves when swith on and water plant target has low and dry soil using soil mosture hope you notice me bro
@RobotLk
11 ай бұрын
Ok I will try
@Codecode707
11 ай бұрын
I know you can bro , ill just wait and feel excited for your next upload bro that meant that🥰
@Codecode707
9 ай бұрын
Where is it now bro
@travel.skorea2527
11 ай бұрын
The sensor is working but car is not working the battery is fully charged 3.7V
@RobotLk
11 ай бұрын
Does the motor drive have the 2pin mini connecter?
@beyondusee8740
11 ай бұрын
Hi brother I have done everything as you said but I have used 12v motor, whenever the ultrasonic sensor detects obstacle it stops, and it is not moving, could you say what's the reason?
@malekkh-ww6bj
6 ай бұрын
Hello plz reply i have timline to complete the project ; Obstacle avoidance + Bluetooth control i wrote the code and everything but the problem is the hc-05 module keeps powering off after 5 seconds of pairing and i am using 2*3,7 lion battery why its not working? thanks bro
@AngelLlamocca
Ай бұрын
Hello, I have a question brother, the robot worked well but when it does not find any object, it spins around and does not move forward.
@AngelLlamocca
Ай бұрын
Help brother please
@gamingmind7868
14 күн бұрын
@@AngelLlamoccaBrother he told that if it is spinning then just change the connections of the wires as he told in the video
@SomaRoy-pb2ie
10 ай бұрын
Bro, I have connected the sensor with the 5v of the arduino . Now there is no 5v to connect the servo motor. Where will I connect it? And do we have to make any changes in the code?
@phineaslausa8929
10 ай бұрын
the code is just makingthe servo motor spin, it is not moving. any thoughts about the code?
@BushraNadeem-d1x
Ай бұрын
Hello Broo my DC motors are working but the servo and ultrasonic sensor is not working can you please help me cause I have to submit it for the model making
@ashirvadlokesh1038
Ай бұрын
hello ma no way i found youre comment
@RobotLk
Ай бұрын
The ultrasonic sensor is damaged or not connected properly. The ultrasonic sensor affects the operation of the servo motor.
@sandrasnair
5 ай бұрын
Should we use 2 or 3 lithium ion batteries??
@RobotLk
5 ай бұрын
Use two batteries
@anirudhyadas4214
3 ай бұрын
Our Car Is Working But Sometime It's Not obstacle avoid. What is the solution?
@RobotLk
3 ай бұрын
That's normal, You can increase the distance of the sensor with the code
@nirajanolivlogs7647
Жыл бұрын
make remote controlled car using l293d ND NODe 8266
@itsfact5541
5 ай бұрын
Dont have 5 volt pin in my arduino I have 3.7 volt for ultra sonic sensor in my arduino uno italian version, it will work?
@RobotLk
5 ай бұрын
Connect the GND of the ultrasonic to the GND of the Arduino board, and connect the VCC pin of the ultrasonic sensor to the 5V out of the L298n motor drive.
@itsfact5541
5 ай бұрын
@@RobotLk where should i canaect the encho pin?
@sk___creations1754
6 ай бұрын
Brother i completed all the connections and i connected the battery without coading, but as i connect it the smoke comes form Arduino 🥺
@RobotLk
6 ай бұрын
What is the voltage of the connected battery?
@queenofmojoo1480
5 ай бұрын
The servo motor output latch is not spinning but sound is coming what to do
@RobotLk
5 ай бұрын
A problem of power. Are you using a 9v battery? Use both 18650 li ion batteries
@sounderguru3683
7 ай бұрын
Bro i connect the battery then the holder was heated and l298n motor driver also heated?
@RobotLk
7 ай бұрын
There may be a problem with the motor drive.
@urnonexistentlol.
3 ай бұрын
bro please my motors are the same as urs however they do not have wires on them what do i do??
@RobotLk
3 ай бұрын
Solder the wires in your motors as I have soldered the wires in the motors I show
@urnonexistentlol.
3 ай бұрын
@@RobotLk ok thank u so much
@sambanay4218
3 ай бұрын
why mine gust keeps spinning
@itsfact5541
5 ай бұрын
Can i use arduino uno italian version?
@RobotLk
5 ай бұрын
Yes
@head_hunter7856
11 ай бұрын
bro my one is not working ne side wheel is going forward and other side is going backward i dont know my servo is also not working its only turning one side
@SomaRoy-pb2ie
10 ай бұрын
The side going backward... Interchange that side wires on the l298n motor driver. If out1 has red and out2 black, make out1 black and out2 red.
@trekkingmohan7184
10 ай бұрын
New ping library is not found... Its not downloading... Can u please help me to complete my project...
@RobotLk
10 ай бұрын
There is a link to download the newping library below the code on the website.
@RobotLk
10 ай бұрын
This video shows how to add kzitem.info/news/bejne/kY6VuWt4pX2WYIIsi=phku-r9c-3MJtg66
@Money_Gamess
10 ай бұрын
Is it possible to program arduino from a phone?
@RobotLk
10 ай бұрын
Yes, it is possible
@enjoyr3046
7 ай бұрын
Sensor working but car not moving bro what can do bro please
@RobotLk
7 ай бұрын
What batteries are used?
@sambanay4218
3 ай бұрын
bro check your motor driver the enA and anB should be connected to each other
@raveeshanirandi1329
6 ай бұрын
Okata bluetooth modular ekak hai karanna barda
@RobotLk
6 ай бұрын
Mekata ba.eka wenama hadanna ona. Bluetooth Control car hadana video channel eke thiyenawa
@kuttiproductions
Жыл бұрын
6,7,8 වසරේ හොදම යාලුවා මතකද උබට.😁❤️
@RobotLk
Жыл бұрын
Na bn, අයේශ් ❤️
@RobotLk
Жыл бұрын
KZitem channel ekak karanawada,
@kuttiproductions
Жыл бұрын
ou bn krnwa, shape ake
@IDP95
8 ай бұрын
I cant open link
@RobotLk
8 ай бұрын
An update on the website. Download the code and diagram from this link drive.google.com/drive/folders/1wozM3SPN-hYxvvB6o3apKNM7Bxq-s0aR
@ShashidharRudraganti
7 ай бұрын
Bro the code is not working
@RobotLk
7 ай бұрын
what's the problem
@ShashidharRudraganti
7 ай бұрын
Bro it solved thanku bro
@RobotLk
7 ай бұрын
Welcome
@Money_Gamess
10 ай бұрын
I got an error in the code
@RobotLk
10 ай бұрын
Add newping library
@Money_Gamess
10 ай бұрын
can you do it yourself please?
@debabratadas9762
5 ай бұрын
the project is infeasible, the 4 volt hubby motor will take more than 12 volt in output, and you are just giving 9 volt in supply.
@RobotLk
5 ай бұрын
9v battery cannot be used. You can use rechargebale 9v battery. 9v battery amperage is not enough. Many people who have built using 9v battery have commented that it does not work properly.
@debabratadas9762
5 ай бұрын
@@RobotLk even if you will use 12 volt li-ion battery, it will still not suffice the voltage requirements. The output rating of 4 motor is more than 12, also you have to give power to servo and sensor. And you are using l298 instead of l293d
@SKGAMING_299
11 ай бұрын
Bro sensor working properly but car not moving please help me bro
@RobotLk
11 ай бұрын
Must be a voltage problem.use two 3.7v li ion battery
sensor working but car not moving pls reply for this problem😔😔😔😔
@RobotLk
7 ай бұрын
What batteries are used?
@enjoyr3046
7 ай бұрын
7.4v battery @@RobotLk
@K98B67
7 ай бұрын
bro motor not moving
@RobotLk
7 ай бұрын
What batteries are used?
@sounderguru3683
7 ай бұрын
The sensor is working but the car not moved
@RobotLk
7 ай бұрын
9v battery is used?
@enjoyr3046
7 ай бұрын
7.4v battery bro @@RobotLk
@knightk7222
8 ай бұрын
Hi bro 1stly please respond to my query Ive used (L293D. Motor driver) Everything is fine I'm using 2 ×3.7 v cells but sensor is working but motor is not working please help i can give you my mail id if you want to respond
@RobotLk
8 ай бұрын
If l293d motor shield is used, the arduino code must be completely changed. I am using a l298n motor drive. The code I used and the circuit diagram do not match the obstacle avoiding robot made using the l293d motor shield.
Пікірлер: 82