Love it, If you let your resin set for about 10 minutes the bubbles will come to the top then just hit the top of your cup w your torch. glass half full website for your sand and glass
@crazyglasslady
Жыл бұрын
Yes now I actually let it sit for 10-15 min but it took me awhile to figure that out. I have never hit it with a torch before I pour it. will have to try that.
@christineelsass4284
2 жыл бұрын
Your videos are so informative. I appreciate your attention to detail. It is possible to make a video on the entire process you use for tumbling the glass. Duration in the tumbler and type of grit? I’m ready to buy your recommended tumbler but unsure on the process.
@KMF3
2 жыл бұрын
She has a video on that
@crazyglasslady
2 жыл бұрын
Yes I think I may have it incorporated into some other videos, but i have been thinking of doing one entirely dedicated to that, so yes I will.
@christineelsass4284
2 жыл бұрын
You are so very kind, thank you!
@sandynuber1509
Жыл бұрын
Another beautiful art project. ❤
@crazyglasslady
Жыл бұрын
Thank you! 😊
@usherl250
2 жыл бұрын
So pretty, I love glass on resin
@crazyglasslady
2 жыл бұрын
Thank you!
@KMF3
2 жыл бұрын
Another beautiful one
@crazyglasslady
2 жыл бұрын
Thank you!
@shurlanelsonmcmanus5697
2 жыл бұрын
You are so creative! Always love what you do.
@crazyglasslady
2 жыл бұрын
Thank you!
@lynnmacdonald4800
2 жыл бұрын
This is so lovely!!
@crazyglasslady
2 жыл бұрын
Thank you! You said you do mosaics , have you ever done glass on glass mosaics, or what kind do you do? I am just fascinated with the amount of work that must go into the mosaics where every square inch is covered with glass or tile.
@d_caff3491
2 жыл бұрын
❤️
@mywifetheartist
9 ай бұрын
This is so cool. I seen your video you demonstrated the tumbler, but I don’t understand why you did this.
@crazyglasslady
9 ай бұрын
So you’re saying you don’t understand why I tumbled the glass? When you break glass the edges are sharp if someone touches it, they could slash their fingers. So if you tumble it it takes the sharp edges off the longer you tumble it the softer and more around the edges become. So it just depends on how you want your glass to look. I have recently found out that you can tumble glass in just water for 1 to 3 hours to remove the edges and you won’t end up with a frosted look like Seaglass or faux Seaglass.
@anitadepa3041
Жыл бұрын
Love watching your videos. Can you elaborate on your tumbling glass method? What grit, how long? Thanks a million Linda!
@crazyglasslady
Жыл бұрын
Yes did you watch my glass tumbling video I go into detail about it! here is the video: kzitem.info/news/bejne/xYOn03-oi5mpoGk
@rachellarsen939
2 жыл бұрын
Beautiful 😍
@crazyglasslady
2 жыл бұрын
Thank you!😀
@TheGreyFortress
2 жыл бұрын
I love your videos. You're going to cost me money because I know I'm going to buy a rock tumbler! I have so many art supplies I'll never live long enough to use them! Love your show and what a beautiful piece of work this one was💚💙💜
@crazyglasslady
2 жыл бұрын
WOW thank you so much! So over 3 years ago I donated all my crafting stuff to Girl Scouts because it was supplies I knew I wouldn't use again and I really didn't know anything about glass at that time. Then I bought a rock tumbler and another and another and another. I just fell in love with it. Now I have this entire room filled with crafting supplies again. LOL You will have to let me know what you make with your 1st tumbled glass.
@macsshack4623
2 жыл бұрын
I just tumbled my first batch of faux sea glass! I can’t wait to do another batch! Crazy glass lady.....you are inspiring us! Thank you!
@crazyglasslady
2 жыл бұрын
That's wonderful would love to see what you make!@@macsshack4623
@darleneniper8495
Жыл бұрын
I love your projects what size grit do you use in your tumbler
@crazyglasslady
Жыл бұрын
I usually use 35 because it smooths the glass faster.
@pam1557
2 жыл бұрын
I love your videos! Love the way you take your time to explain your process. Wouldn’t mod podge work the same?
@crazyglasslady
2 жыл бұрын
Mod Podge would probably hold the glass down especially if you first put a layer down then poured it over it. Mod podge works like Elmers Glue. I don't think it would put a protective layer over the sharp glass and it would not be as glossy but would have some gloss to it. Now the vase part is quite heavy, so you would have to make sure that it had enough surface touching the canvas to be able to be held with the glue or full strength Mod Podge. I hope that helps.
@familyusage3284
2 жыл бұрын
Please explain why you need a tumbler please thanks
@crazyglasslady
2 жыл бұрын
A tumbler smoothes the sharp edges of glass and makes it easier and safer to work with.
@dally4905
Жыл бұрын
Cannot find the video of your glass breaking box, looks like a pretty good size box could you give me your dimensions of your box ? Did someone make it for you?
@crazyglasslady
Жыл бұрын
My husband made it for me and it’s about 2’ x 3’
@crazyglasslady
Жыл бұрын
kzitem.info/news/bejne/xYOn03-oi5mpoGk
@TheGreyFortress
2 жыл бұрын
If you go to dollartree.com and type in sea glass you can order 24 packs of those beautiful little glass pieces. The only downside is you have to order 24 packs but in this case I think that's good!
@crazyglasslady
2 жыл бұрын
Yes that is the chunky sea glass I’m not sure if it stays that color if you tumble it if you wanna break it up and make it smaller or not I forget
Пікірлер: 52