I just came across your page for needing to sharpen my décor candles and you've been such a help. Thank you for taking the time
@olesya8737
2 жыл бұрын
The most informative video I've ever watched about making a bubble candle. Thank you so much!
@KIMALONDON
2 жыл бұрын
I'm so glad it was helpful for you! Thanks so much for watching 💛
@KIMALONDON
2 жыл бұрын
I used Kerasoy 4120 wax in this video not 4130 which I meant to say is a container wax! I will go over in the next video how usually rapeseed wax turned out 👀 Thanks for watching! 💛🕯
@Checaruiz
6 ай бұрын
Important tip 🤦🏻♀️ in order to be more efficient on time-work, use a microwave and set it for 3 min., if it’s not completely melted set it again for 1:30 more! Hugs and I hope this works for you as well.
@carmelavicaria7129
Жыл бұрын
Brilliant tutorial thank you so much for sharing, I have just started making candles myself ❤
@MadeInBelize
2 жыл бұрын
Great Job. I like how honest you are. 3:45 I use my stick thermometer to make the hole in my moulds, then push the needle and or wick through. Pretty easy, you should try that.
@roseg6703
2 жыл бұрын
Good trick for stableising tricky candle mould shapes is put it a bowl of sand set it with some sand packed around the mould good to go.
@KIMALONDON
2 жыл бұрын
Great tip! Or even rice? 👀
@aquaticassistantt9581
2 жыл бұрын
I really appreciate you making this video!! It is super helpful
@KIMALONDON
2 жыл бұрын
Thanks soooo much for watching!
@blushbaby6898x
2 жыл бұрын
Amazing to see you again!! I hope you are well xx
@KIMALONDON
2 жыл бұрын
Hey lovely!!! Good to be back! Aww I hope you are all well too! 💛
@tanyamack1481
Жыл бұрын
Thank you for this video. I am trying bubble candles for the first time so this helped. And by the way, you are gorgeout!
@sarahyoung1993
Ай бұрын
Aww thank you for video
@Arigni_Handmade_Products
8 ай бұрын
I did this. But i got some rough surface. Is there any oil to apply in the mould? Pls tel me..
@meysak
2 жыл бұрын
My bubble candles never seem to set on the top properly (so bottom of the mould) I’ve tried leaving it to set longer and I’m making sure I pour at the right temperature, tried putting the mould flat on the bench and ontop of something with the same problem. I’ve not had a problem with any other mould shapes wondering if you have any tips to stop this happening!
@KIMALONDON
2 жыл бұрын
Thats so weird! Never heard of this! Does it set at the bottom (top)? If you have pics, please show! (Facebook, vibely or IG) xx
@Cee_Cee8
2 жыл бұрын
Great video just wondering if you have ever burned a bubble candle I tried to make it but every time I've tried the candle as the candle is burning it drip all over my candle plate. is it meant to do this? id rather it just tunnel down than seep out. any advise you could give would be great. my bubble candle has a 5 inch diameter and I've used tcr 24/14, tcr 21/12 gonna try an eco 0.5 and eco 1 tomorrow. I'm determined to make one for my mum for mother's day hunting running out of time 😬
@remathe-beloved
Жыл бұрын
Thank you so much for how detailed and straight to the point you make your videos. New subscriber here😊 can I ask why you let it reach 80 degrees and then let it cool to 6something?
@tayoajanaku9
Жыл бұрын
Hey Ik this is an old video but how do you get your bottoms to be flat? Mine ALWAYS sink in, I’ve tried heating from a lower temp and also heating my mold too but it still sinks, no matter the mold, the candle sinks.. any tips? Cause yours looks amazing
@whoareu9683
2 жыл бұрын
Heeey, love all the infos in your video. Curious though: did the wick eco2 turn out nicely? Aka the burn time was nice?
@AnkitaDas-ui7vh
2 жыл бұрын
You're so cute ❤🥺 I can feel you. Wish you luck Love from India
@KIMALONDON
2 жыл бұрын
Aw thank you Ankita! 💛
@sams.k.y3920
2 жыл бұрын
what is the best degree to pour soy wax and how many minutes we have to wait so we can add the fregrance????
@aliciamarie3384
Жыл бұрын
What wick do you use for the 4120? If you don't mind me asking
@meekdevaserenitycandles9309
2 жыл бұрын
Those bubble candles came out perfect. What do you put them on to burn them safely?
@KIMALONDON
2 жыл бұрын
Sometimes a glass plate, sometimes a mirrored plate!
@sams.k.y3920
2 жыл бұрын
is the soy wax bearable to stand or it gonna melt by itself and it is better to pour soy wax into glasses or containers
@andreeaflonta1096
2 жыл бұрын
Hello, I really need your help! I have kerasoy 4130 pillar, I bought it because I saw you working with is. Is it me or it's not good? All of my candles are breaking. It's so frustrating. Please help me. I'm sad cuz I bought 20 kg, and it's not working for me...
@chrisellis8045
Жыл бұрын
4130 isn’t pillar wax lol
@kiarahenry3198
2 жыл бұрын
Can i just use just Kerax KeraSoy Pillar Flakes 4120 without mixing any other wax??
@KIMALONDON
2 жыл бұрын
Yes!
@nopasanada2613
2 жыл бұрын
good girl
@delilapipoly
2 жыл бұрын
🔔😍😍
@raniaranoucha4193
Жыл бұрын
Lady ... you're so cute and lovely ... watching u from Algeria 🇩🇿
@stonecandles8665
Жыл бұрын
Great video! We offer coconut wax candles and supplies. Check us out!
@majofalconite4537
Жыл бұрын
Thank you sooo much, this is the most informative video the I've seen/watched. Its worth the watch also 😇😇😇 #newsubscriberhere 😊😊😊
Пікірлер: 38