Finally someone who doesn't have a full shop with every fancy tool at your finger tips!
@dulangaperera7977
Жыл бұрын
Those are the pioneers who making awesome yet valuable things on a KZitem culture❤
@joewiard8006
Жыл бұрын
You earned my Like for the Ren and Stimpy reference that gave me a wave of nostalgia. :D
@whizfizz4663
4 жыл бұрын
Simple and helpful video. Thanks mate
@anita-.
3 жыл бұрын
Very nice!!! Thank you!!!! Love to do wood projects but never tried doing one, little overwhelming!
@robertgarner11
3 жыл бұрын
Thanks for doing it by hand!
@jthreeb
5 жыл бұрын
They turned out nice!
@lizlast7924
4 жыл бұрын
That was awesome and informative
@jstrunck
7 жыл бұрын
Thanks for posting!
@xaviercasey2787
4 жыл бұрын
I found the video helpful, thanks man
@flowerenki9818
2 жыл бұрын
Awesome. Thank you for the video
@Spain42
2 жыл бұрын
Love them! Thanks
@shannonboydjr7682
Жыл бұрын
Thank you for sharing. As far as the bark coming off, after they’re glued and finished like you showed, some epoxy resin will probably help so that no more bark comes off later
@eddyx420
Жыл бұрын
Would the epoxy resin go around rings or used as glue on the inside of the bark?
@EyupSureThang
4 жыл бұрын
Why rub with steel wool after spraying the sealer..? I was curious what the reason was for this final step....I bought some little branch type coasters, going to try your project idea. Great video.
@EricOsaer
Жыл бұрын
I really appreciate this content because I've been looking for a way how to do it without a bunch of fancy power tools right now I have some fast drying polyurethane and I'm using a brush but I'm wondering how long should I let the Polyurethane dry for I don't have a spray can
@heyyou4023
3 жыл бұрын
I saved the tree limbs from yesterday's tree trimming. I started to slice them today because that 12" log would take forever to dry. Moist wood is difficult to cut. I found the best way to handsaw it was to use a simple miter box, the cheapest one. I used a hacksaw for metal at 24 tpi. It was much easier to use this blade to cut moist wood as compared with the saw that came with the miter box (push saw) or a pull saw. The miter box helped to stabilize the wood from getting away and made for positioning the wood much easier. I cut 3 wet coasters today. I'm not strong, being
@emostorm7
4 жыл бұрын
Ren and Stempie throwback nice! Lol
@rosiekarger697
Жыл бұрын
TY for sharing couldn’t make it any easier😊
@jpeaston477
2 жыл бұрын
Awesome Ren & Stimpy reference!! LOL!!!
@CedarworkshopNet
8 жыл бұрын
Oh yeah, I remember that song... "Log, log, its short, its brown, its wood!"
@emostorm7
4 жыл бұрын
It's big it's heavy it's wood
@raidrums
3 жыл бұрын
as soon as u said it i remembered ren n stimpy lol liked n subscribed thats all it took 😆😆😆😆
@alj521
3 жыл бұрын
was nice coasting thru video
@2logj
3 ай бұрын
thanks.can we used boiled linseed oil instead of Tung oil? best wishes
@VitosFix
3 жыл бұрын
Awesome!
@wesleycollins1092
2 жыл бұрын
If you wanted to create a design on them, at what step would you do it?
@LH-fx7dn
3 жыл бұрын
Can you use any type of tree?
@jakethev
4 жыл бұрын
love the ren and spimpy reference
@LH-fx7dn
3 жыл бұрын
Is there something other then Tung oil I can use
@barthchris1
8 жыл бұрын
Nice! I tried the same thing a while ago but the wood cracked after it was finished because the branch looked dry but obviously wasn't quite dry enough. I did the project over but this time before I sliced the branch I put it in the oven on a low temp for about 4 hrs. Dont remember the temp but it was just below 212F, poor mans wood kiln, just do it when the wife's not home. Came out perfect with no cracks. Something to think about.
@jabariulises3404
2 жыл бұрын
@Carmelo Lennon yea, been watching on instaflixxer for years myself :D
@georgejaxxon481
2 жыл бұрын
@Carmelo Lennon Definitely, been using instaflixxer for years myself :)
@ChildishGambeaner
2 жыл бұрын
@@georgejaxxon481 liar
@ChildishGambeaner
2 жыл бұрын
@@jabariulises3404 you both made your profiles at the same time you can't fool me
@tisi4635
Ай бұрын
nice job. but could you please also explain how to sell these wooden drink coasters? where can we sell and for what price per piece? thank you.
@surbhibansal1940
3 жыл бұрын
How to dry these wooden slice?? Without drying it will break.
@peggyrowe4354
5 жыл бұрын
my son and I cut down a bunch of volunteer trees in the yard, and this is what I was thinking about making for Christmas presents. I don't have a table saw, just a chain saw, hack saw, and a skill saw. My problem so far has been getting them flat, and not thicker on one side
@lunagragg2627
4 жыл бұрын
I’ve found using a 2x4 stop, making a “sacrificial” first cut, and cutting on a slight angle helped get a uniform thickness.
@kitiaraumathar
Жыл бұрын
Thank you!
@jimmyfarrow6486
Жыл бұрын
A Ren and Stimpy reference. Have a like.
@erikpettersen8360
7 ай бұрын
Is the branch dried already or is it fresh cut branch
@saqibhaq8511
3 жыл бұрын
Can you please advise if they cracked over time? Usually when wood dries cracks appear , happened to my candle stands made from branches of maple
@rmi2548
Жыл бұрын
it wont ever crack of you use the correct sealent. it will always crack if unsealed or sealed incorrectly
@jstewart627
Жыл бұрын
4:25 most viewers are missing this part!
@lauralaforge558
5 жыл бұрын
Hello, I wanted to save a slice from each of our Christmas tree stumps. I bought an electric miter saw. I am new to electric tools and apparently don't quite understand safety yet. I couldn't really figure out how to clamp the short (5-6") stump to the base. Stupidly, I attempted it twice and was rewarded with massive kickback. I found your video by searching how to cut a Christmas tree stump into slices safely. You say this would be easier with an electric saw. How would you do this safely?
@marscodez6773
3 жыл бұрын
Clamp a piece of 2x4 to the left side of the saw place the stump up against the 2x4. Clamp another 2x4 on the right so it presses everything together with the stump in the middle where you want your cut.
@lauralaforge558
3 жыл бұрын
Mars Codez Thank you for the response... I still have my unsliced stumps :) Wouldn't that be putting pressure on both ends of the stump? I thought in general you're only supposed to have something on one side so the cutoff doesn't bind, if that's the right term?
@pablos2184
6 жыл бұрын
Can you remember where you got that miter saw and how much it was?
@williamcordova6737
6 жыл бұрын
Efren Moreno you can find it at any hardware store.
@aleksanderrui3418
2 жыл бұрын
I liked it much better lighter then the color of darker
@mastergolucky
4 жыл бұрын
I was expecting to learn how to make a rollercoaster 😂
@fondasharkey-wyatt9944
Жыл бұрын
Recently had an ice storm where many branches came down. So now I have plenty of wood to try making coasters with.
@JusBidniss
4 жыл бұрын
What rolls down stairs Alone or in pairs, Rolls over your neighbor's dog? What's great for a snack, And fits on your back? It's log, log, log. It's log, log, It's big, it's heavy, it's wood. It's log, log, it's better than bad, it's good. Everyone wants a log. You're gonna love it, log. Come on and get your log. Everyone needs a log, log, log, log. "LOG FROM BLAMMO!"
@KaizoGC161
2 жыл бұрын
Nice reference lol
@scrotiemcboogerballs4967
2 жыл бұрын
Won't they just crack?
@starsackaney4996
7 жыл бұрын
Hey I haven't heard that song in a while!! And btw, love the way you continue the rustic boho theme; drinking from a jar!! Hey if it works, why not, right?! Thanks dude, nice DIY =D L - Cheerio
@Makify1
7 жыл бұрын
I'm glad you liked the video.
@devonwalker4780
5 жыл бұрын
waht tools do you need?
@jjasaty8500
7 жыл бұрын
what the name of this wood??? please tell me):
@Makify1
7 жыл бұрын
It is a branch from a Silver Maple tree.
@raishadabdul5171
3 жыл бұрын
whats the steel wool for?
@Makify1
3 жыл бұрын
It's like very fine sandpaper. It gives a very smooth finish.
@cuponnery5914
5 ай бұрын
Simple exsacly what in looking for
@MattyBoi1814
3 жыл бұрын
I used a chopsaw 🙏
@rajeshkrtewari2543
Жыл бұрын
🌟🌟🌟🌟🌟
@jimbob.2299
5 жыл бұрын
two words... Band Saw
@TheMigraineGuy
6 жыл бұрын
#RenNStimpy
@greatnationnow
6 жыл бұрын
Why, why, why did you suggest baking soda and water? I just ruined half the slices I spent the day cutting with this step! They are all gray and ugly now, instead of a nice golden brown! Was trying to do a craft for a birthday tomorrow, but now I have to go find another matching limb to drag out of the woods in the morning. So bummed!
@sweettooth5737
6 жыл бұрын
greatnationnow Notice that he said to test on scrap piece. Different woods yield different results...
@chickenpermission3279
6 жыл бұрын
TastyCritters some people don't have a brain. Don't do their own research and don't listen.
Пікірлер: 75