I will share this video to my group of over 10,000 sublimation members. You created a great tutorial. 😍🔥👏
@BarbaraRogers65
4 ай бұрын
Thank you, these are so cute. I have some blanks and have had them for awhile so I need to try these.
@marlettaengland1513
9 ай бұрын
Love this. You just solved a gift idea for a ‘hard to buy for friend’. Love your videos.
@AngieHolden
9 ай бұрын
Thanks so much! 😊
@rolandechabot6341
Жыл бұрын
I’ve been making these as well and I add a small dot at the top and bottom of my image to mark where the center is so it lines up perfectly on both sides. Works perfectly!
@AngieHolden
Жыл бұрын
Great idea!
@Bentleyx3
Жыл бұрын
You’re a great teacher! I’ve been binge watching your videos and I have learned so much from you! Thank you!!
@AngieHolden
Жыл бұрын
I'm so glad!
@MdRohomot-s9p
21 күн бұрын
S
@bobbidonley5158
Жыл бұрын
I am so happy you did this! I have been wanting to do this but have been hesitant x now with instructions I can!
@sasse57
Жыл бұрын
I have been making these for a while now. So much fun and designs are endless!
@sherriepatrick6713
Жыл бұрын
How much do you sell for?
@sasse57
Жыл бұрын
@@sherriepatrick6713 $20.00 each
@Bristolgrl
Жыл бұрын
As usual, you share quality projects! If I need to learn something, I first go to your channel! ❤️❤️❤️
@elizabethcoppin6138
5 ай бұрын
Thank you so much I am now going to try one of these spinners Thanks again YOU ROCK
@AngieHolden
5 ай бұрын
Have fun!
@patriciajohnson3060
Жыл бұрын
They turned out beautifully❤it’s the time to press some of these out!!
@fatimarazon8407
Жыл бұрын
Never seen this before, neat idea!
@AngieHolden
Жыл бұрын
I love these blanks!
@friskundertale617
Жыл бұрын
Thank you so much for this video. Just made a spinner and LOVE it!!!!!!!!
@AngieHolden
Жыл бұрын
Yay! So glad!
@aliciafoor7
Жыл бұрын
hi angie i missed the camp for campers for sublimation but i did get jennifer makers sub cook book and i love all u guys stuff its great and i hope to get more inspired by you both thanks again alicia foor
@AngieHolden
Жыл бұрын
So happy you are here!
@valeriepanzarella921
Жыл бұрын
Hi Angie!! I just ordered your Sub Organization Binder….thanks for the GREAT DEAL!! I have everything I need to sublimate - just haven’t taken the plunge yet!! Don’t know why I’m nervous about it…..I’ve done crafting and sewing most of my life! 😊 These wines spinners are adorable - I can’t believe you found blanks to sub on!!!
@AngieHolden
Жыл бұрын
Yes! I love these blanks!! Be sure to join us for sublimation camp in May! Free tickets at sublimationcamp.com !
@josuss175
Ай бұрын
Angie, these are so pretty. I can't wait to make one. I had a design I found in DS and it's a print then cut, size is 8 in. It won't print because it's too large and there is file print size limitations in DS. Is there a work around for that in DS? When you find something in DS that someone did I figured it would be ready to go. But its too big. It's a Sunflower wind spinner in DS. I will try yours too but I own a pack of 6 so I thought I'd make them all different. Thanks for any help you can give.
@AngieHolden
Ай бұрын
You are not going to be able to print large enough in design space. I just used another program to print.
@vickiel914
Жыл бұрын
Those turned out cute!
@LisaVornhagen
Жыл бұрын
That's really cool! I love wind spinners!
@terriherrmann338
Жыл бұрын
These are so cute! I ordered some and going to give it a try. Thanks for the great directions!
@AngieHolden
Жыл бұрын
Glad you like them!
@helenduquette7386
Жыл бұрын
Fantastic tutorial Angie. Thank you so much ❤
@AngieHolden
Жыл бұрын
Glad it was helpful!
@FredFiorito
4 ай бұрын
Thanks for your instructions. My final wind spinners are vibrant , but have a little haze on them that you can see when tilting them against the light. Yours look crystal clear. Do you have any advice?
@AngieHolden
4 ай бұрын
It could be the brand? You might also make sure you got the protective film off.
@elainaailes1535
Жыл бұрын
I have been wanting to do wind spinners, love the way they look and work. Thank you for an awesome video! I was worried about the bending of the rings, but you're video made it straight forward to follow! Thanks again!!🥰
@AngieHolden
Жыл бұрын
I was worried about that as well but it was super easy!
@maribethbieber1209
Жыл бұрын
And I can’t get the template to work for larger size prints I use the yellow letter size Thank you Maribeth
@maribethbieber1209
Жыл бұрын
I had it working with the template after a month I wanted to make the spinners. We use to put the size in on the right under the layers and it won’t come up to put the size in
@ehodge54
Жыл бұрын
Thanks Angie for your easy to follow video. I mistakenly bout the 10" spinner not realizing I can't printer wider than 8.5". I'm going to order these smaller ones soon.
@AngieHolden
Жыл бұрын
You can piece together your print and try it since you already have them!
@pattyobrien7822
Жыл бұрын
I did the same thing!! Going to try piecing.
@NannaCathy
Жыл бұрын
You could also use Infusible Ink (they are 12” sheets) to form an outer frame and cut the center to place your sublimated design.
@ChaoticBliss23
11 ай бұрын
Do you have a video on how to do this? I too bought 10" spinners not realizing the 2800 only goes to 8.5x14. :( @@AngieHolden
@amg73185
6 ай бұрын
I followed your video but for some reason I'm getting bleeding on the other side. Do you know what would cause that
@juliasnider5905
Жыл бұрын
I too have been wanting to make these 😊 Thank you Angie for a great tutorial! ❤
@AngieHolden
Жыл бұрын
Go for it!
@824evelyn
10 ай бұрын
@@AngieHolden
@funisgood1872
5 ай бұрын
If I may...what size is the inside circle that you put your picture on? Love your videos, have learned so much stuff. Who says you can't teach an old dog new tricks...lol have a great day everyone.
@AngieHolden
5 ай бұрын
I measured the inside surface on the wind spinner and made it about that size.
@joannbishop5816
Жыл бұрын
Love these! Need to try!
@barbcunnius3904
Жыл бұрын
Beautiful love them
@AngieHolden
Жыл бұрын
Thank you! 😊
@carollewis1644
Жыл бұрын
Thank you for the video. I wanted to ask you if you would do a short video on how to sublimate photo in the center of the wind spinner. Also, if you are concerned about the UVA rays, Krylon makes a clear spray that protects items placed outdoors from fading, etc. I use it all of the time and it really works.
@AngieHolden
Жыл бұрын
I did a photo in this video? Not sure what else I would say about doing a photo.
@tammytoth5874
Жыл бұрын
SO COOL!! Added to my Birthday Wish List 😊
@AngieHolden
Жыл бұрын
Have fun!
@emeraldjdesigns
Жыл бұрын
I love this video! It was so informative. I do have one question, if you don’t have a firmer mat, can you just double over a thick towel and use that? The only night I have right now is the easy press one. I would’ve never thought about needing a firmer mat for something like this, thank you for that tip!
@AngieHolden
Жыл бұрын
I would think that would work!
@juliebadger6493
Жыл бұрын
Thank you sooooo much for this excellent tutorial! Just did my first sublimation wind spinner following your instructions and it went great! But, of course, I forgot to peel off the plastic coating on the side that I wasn't sublimating - so I had to clean that up. But, I'm super excited about this project. Thanks again!
@AngieHolden
Жыл бұрын
I do this ALL THE TIME! Ha!
@Taliaris
Жыл бұрын
Thank you for sharing your talents! I was wondering, since these are primarily for outside, do you seal them with anything to prevent rust?
@AngieHolden
Жыл бұрын
They should be sealed for that when coming to you.
@joycelandry8499
7 ай бұрын
Like your videos. On the wind spinner what size was your design when you printed it out for sublimation?
@AngieHolden
7 ай бұрын
A little over 8 inches.
@foxxyyful
Жыл бұрын
Great video, would love to see one on how to make the sublimation with a A4 paper.
@AngieHolden
Жыл бұрын
It would be the same process.
@bethlahore8929
3 ай бұрын
❤🎉 ive been watching sublimation how tos for a while. I ordered some spinners, and flew by seat of pants making first one before looking how to. It turned out, but now watching how to. Lol. Yes. Im backwards
@AngieHolden
3 ай бұрын
Good luck!
@abysss56
3 ай бұрын
I use 90 sec and works perfect each side
@JB32876
Ай бұрын
Yes 3:45 was too long
@karenh8778
Жыл бұрын
Hello Angie. I absolutely love your channel. I've been pressing my wind spinners, per your info, at 385 for 225 sec. I've seen everywhere else at 385 for 60 secs. I'm wondering if something has changed since you've posted this video. Have you tried to press for a shorter time? Please advise. I don't want to ruin a spinner since they aren't cheap. Your time works great but it get so hot and if I can reduce the time that would be great.
@AngieHolden
Жыл бұрын
For all sublimation blanks, you should follow the recommendations where you purchase them. Each supplier is different. The ones I used called for that time and temp so that is what I used.
@karenh8778
Жыл бұрын
@@AngieHolden Great thanks. I believe the Amazon ones that I got call for your recommendations.
@annaabbott7345
Жыл бұрын
Love all your videos. Do you let the first side cool down before you do the other side? Thanks.
@AngieHolden
Жыл бұрын
They cool REALLY quickly so yes I did.
@ednaanadio6552
Жыл бұрын
These are great. Just received them. Since they will be out in the garden should a top protective coat need to be added?
@AngieHolden
Жыл бұрын
It should not be needed but I don't know how good the UV coating is on these.
@CindyGarel
10 ай бұрын
I loved you video and it all seems very easy to do except how do you get the film off?
@AngieHolden
9 ай бұрын
I just use my fingernail but you can also try picking up with gorilla tape.
@cathysiddall7355
Жыл бұрын
Really awesome love them just don't do sublimation yet could I Ossibly do infusable ink thanks again for another great video
@AngieHolden
Жыл бұрын
Yes you can!
@cathysiddall7355
Жыл бұрын
@@AngieHolden awesome cant wait make for sprig thanks angie
@mtnmamacolo1
Жыл бұрын
Great training video! I have an outside event coming up. Do you have any ideas how I can show these at the event?
@AngieHolden
Жыл бұрын
I think I would do samples that you form like this and have hanging. Then you can have the ones you are going to sell flat for easier storage and transport!
@sandraberger3040
Жыл бұрын
These are very cute! How did you get a round picture as well as combing it with background picture?
@AngieHolden
Жыл бұрын
I just used canva and they have circle frames that allow you to drop a picture inside.
@chrisnewfie
Жыл бұрын
Thank you for the vid. I ordered 2 spinners 8 inches for my 9x9. I don’t have a thin mat but was wondering if I can use a silicone kitchen mat?
@AngieHolden
Жыл бұрын
That probably wouldn’t be thick enough. You can try the EasyPress mat I think. Just notice if it is deforming the wind spinner and affecting your sublimation.
@heartkey61
9 ай бұрын
Hi great video I was wondering what size did you make your photo for the 8 inch spinners?
@AngieHolden
9 ай бұрын
I just measured the center and made it about that size.
@faithyates7826
Жыл бұрын
So cute Angie! Great instructions! Thank you😅
@AngieHolden
Жыл бұрын
You are so welcome!
@sherriepatrick6713
Жыл бұрын
Thank you so much it's so cool. Can you tell how much to sell them for if they are not custom.
@AngieHolden
Жыл бұрын
Sorry I do not have pricing.
@kelleymcfadden4079
Жыл бұрын
I love your tutorials!! I have done 4 wind spinners and they all have come out beautifully. I just have a question. How do you do the background and then the picture? I’m using Canva but can’t figure that out. Thank you!!
@AngieHolden
Жыл бұрын
I just add the background then add the image on top of it.
@kelleymcfadden4079
Жыл бұрын
@@AngieHolden Did you use Canva for this? I don’t see backgrounds to use. Thank you
@AngieHolden
Жыл бұрын
I did use Canva. The background is a free download from me.
@kelleymcfadden4079
Жыл бұрын
@@AngieHolden oh ok. Thank you so much 😊
@mariepotter3676
Жыл бұрын
Love this idea!! Can you use Cricut infusible if you don't have a sublimation printer?
@vickiel914
Жыл бұрын
I was thinking about that also, since I don't have a sublimation printer. I bet it would work just fine. You'd be limited to what's on the sublimation sheets and whatever design you wanted.
@AngieHolden
Жыл бұрын
Of course!
@mariepotter3676
Жыл бұрын
@@vickiel914 Thanks!
@mariepotter3676
Жыл бұрын
@Angie Holden Thanks! I'm a relative newbie, so didn't want to assume. 😊
@Pugmom76
7 ай бұрын
Will infusible bond the same?
@gerrywolfe2549
Жыл бұрын
Thank you for the great tutorial. I’ve only seen 10” ones, and I only have printer that will print 8 1/2 x 11 or 14. Have you done one for the 10”? Beautiful.
@AngieHolden
Жыл бұрын
You would need to piece your sublimation prints together which can get tricky.
@terriherrmann338
Жыл бұрын
I ordered the 8" on Amazon today.
@patcoombes820
5 ай бұрын
Lovely video instructions. Can You please tell Me , Why my image does not transfer all the ink ,when sublimating as Yours does. I seem to have a lot of image left. even though it will work out .
@AngieHolden
5 ай бұрын
If the image on the spinner looks good, it is fine regardless of what your paper looks like.
@scallo111
Жыл бұрын
Hi, the wind spinners came out great. I’m also going to order the 8 inch. I had previously ordered 210 inch wind spinners, but my printer doesn’t print big. Would you be able to tell me how to piece together an image so I could fit it on the 2 10 inch spinners? I had brought an image into Design Space and hit slice but when I printed it did not come out right. Thank you.
@AngieHolden
Жыл бұрын
I have been working on a larger than the printer video but it is tricky so I am trying to get it right!
@ActorFriend90
Жыл бұрын
Angie, could you actually walk us through how to design and print one in some kind of software? Everything I've been researching I can't get them to line up quite right and I'm off a bit. Plus the templates I find aren't quite like my spinners they're missing like one extra ring I've got like 6 outer rings but all the templates that I see show like five or eight or something like that. Just curious how you line it up and print
@AngieHolden
Жыл бұрын
I didn't line it up at all. I just popped a photo in the center of a design and eye balled it!
@maryloustaley8150
Жыл бұрын
Angie I ordered the large silicone mat that you had the link to. I am going to be using my large Cricut press. My question is, should I remove the cricut mat and not use it if I'm using the silicone mat?
@AngieHolden
Жыл бұрын
Correct. Just use one of the mats.
@maryloustaley8150
Жыл бұрын
@@AngieHolden Thank you
@stephnkris0729
Жыл бұрын
Hello. I bought same exact wind spinners on Amazon. I did not see any protective film and even felt for it. Is that normal with certain sellers? It comes with a sleeve. I sublimated anyway and it came out beautifully.
@AngieHolden
Жыл бұрын
I do feel like the protective film is hit or miss from any place.
@Recallalertnetwork111
10 ай бұрын
Question on the photo windspinners that you did Angie what size do you recommend for the photo, I am thinking about 4.75" would that be what you did yours look perfect for the picture.
@AngieHolden
10 ай бұрын
I just measured the center section on the ones I bought.
@Recallalertnetwork111
10 ай бұрын
@@AngieHolden Thank you Angie I ordered the same spinners from your link, I am switching to a different brand that does not have the protective plastic, these are shipped in a protective bag for each spinner and it comes with heat tape.
@peggywhite7749
Жыл бұрын
Thank you , i have been wanting to try them but was scared id mess up
@AngieHolden
Жыл бұрын
They are easy to make!
@kelleymcfadden4079
3 ай бұрын
I am having a problem with the Wind Spinners. The first time doing them I had no issues they came out beautiful. In the last few weeks I have been making them and when I tape the design on and press it, it is coming out showing my tape marks. I am using the heat resistant tape. Do you have any suggestions I could try? I just don't understand why all of a sudden this is happening. It is very frustrating. Thank you!
@AngieHolden
3 ай бұрын
My guess would be either your blanks or too much pressure. You can try an adhesive spray instead so there are no marks.
@kelleymcfadden4079
3 ай бұрын
Thank you
@veronicaedwards6368
Жыл бұрын
Angie I only have an f170 I got some 8inch spinner blanks will printing the desin out 8.5 by 8.25 work for this size? I saw you said make the design bigger but didnt hear how mcuh larger it needs to be
@AngieHolden
11 ай бұрын
Yep that will work.
@Rhoose123
Жыл бұрын
Omg gorgeous
@AngieHolden
Жыл бұрын
Thank you!
@breedywilson9440
Жыл бұрын
What is the name of the mat you are using
@marlettaengland1513
9 ай бұрын
Since these are likely going to be outdoors, what should be used to protect the spinner and sublimation from rain and sun. I’ve heard sublimation doesn’t hold up well.
@AngieHolden
9 ай бұрын
The sun is an issue. You can add a UV protective spray over them.
@aglo8252
11 ай бұрын
Very kool, thank you..
@AngieHolden
11 ай бұрын
Glad you liked it!
@vickielee8958
Жыл бұрын
Love these!!
@tlillie.designs
7 ай бұрын
Did you calibrate the sublimation printer with Cricut Design Space before doing the print & cut?
@AngieHolden
7 ай бұрын
You can however for sublimation you don't really need to cut unless you are doing sublimation on HTV or using something like Easysubli.
@tlillie.designs
7 ай бұрын
@@AngieHolden Thank you!
@kctkbss
Жыл бұрын
I don’t have the funds to get a sublimation printer. Am I able to pre- order prints and make them?
@AngieHolden
Жыл бұрын
Yep! I started by ordering custom prints from an Etsy seller who would print and send them to me.
@jennifercaul
7 ай бұрын
Can you use a dtf printer to make wind spinners or just a sublimation printer?
@AngieHolden
7 ай бұрын
I have not had luck with DTF on hard surfaces. I would do sublimation for this one.
@jeandiaz3361
Жыл бұрын
Can you please make a video showing how you did the spinner with the picture in the center? Thank you
@AngieHolden
Жыл бұрын
I did it similar to this puzzle where I show the Canva screen: kzitem.info/news/bejne/smx7vnaqjYGUa6w
@jeandiaz3361
Жыл бұрын
@@AngieHolden Thank you!!
@StaySea777
2 ай бұрын
Thank you! Where can I learn how to use Canva or Google Docs to put a photo in the center and a pattern on the outer rings of the spinner? HELP
@AngieHolden
2 ай бұрын
I did a similar process here: kzitem.info/news/bejne/smx7vnaqjYGUa6w
@LizzieWestBathandBody
Жыл бұрын
Thanks for a great share
@AngieHolden
Жыл бұрын
Glad you enjoyed it!
@galewilson4364
Жыл бұрын
Hi Angie, you did a utube dtf powder comparison video, I really liked it but can’t find it on utube any more, did u take it down, if not, can I get the title from you to locate it?
@AngieHolden
Жыл бұрын
I haven't used DTF powder yet actually!
@kimjurica
Жыл бұрын
Would infusible ink work as well? I don’t have a sublimation printer. Thank you.
@AngieHolden
Жыл бұрын
Yes it would!
@janbaker9418
4 ай бұрын
I have a question I am using the cricut easy press but what do you lay the spinner on when you press I see you are using a black piece under your spinner
@AngieHolden
4 ай бұрын
It is an Artesprix heat resistant mat. I feel it works way better than an EasyPress mat for things like this.
@ritaurbina8281
Жыл бұрын
This is awesome!!
@cindyjojo777
Жыл бұрын
Hiii... My ink bled thru..how can I avoid this? I have watched 4 other videos and they all take both sides of the film off
@oohlalagoodies1843
11 ай бұрын
How do you create the file so your picture is round and fits perfectly in the center of the wind spinner?
@AngieHolden
11 ай бұрын
You don’t have to. Overhang just will go on your paper.
@sallypaluh3598
Жыл бұрын
Can you tell me the size that you print for the image for subliamtion and what software you use to print it out please
@AngieHolden
Жыл бұрын
I used Canva and just made it a little larger than my wind spinner.
@jeanninekohler178
Жыл бұрын
Hi Angie I’m trying to do a wind spinner with a a background and picture like you have in this video. However you don’t show how you did the picture do you have a video on that? I’m so stressed, I use canva but am still pretty new with it can you please help!? Thank you
@AngieHolden
Жыл бұрын
I just put the picture in the center. I did not make it a circle or anything. I showed a bit about the process in this video: kzitem.info/news/bejne/smx7vnaqjYGUa6w
@empresst3084
4 ай бұрын
NICE!
@AngieHolden
4 ай бұрын
Thanks!
@tinabailey5554
Жыл бұрын
So i understand that you print your pattern out thru Canva. But dont you have to have sublimation ink and what kind of printer? Not sure how all that works?
@AngieHolden
Жыл бұрын
This is sublimation ink printed on sublimation paper on a sublimation printer.
@susanwilhelm4136
5 ай бұрын
Is it possible to print a png file for a 10 inch windspinner using 8.5 by 11 inch or 8.5 by 14 inch sublimination paper?
@AngieHolden
5 ай бұрын
You would have to join two prints together.
@lori4541
Жыл бұрын
Amazon is out of stock on the ones you used. Do you have recommendation for others?
@AngieHolden
Жыл бұрын
I have not tried other listings but I would say if the reviews are good you should be okay.
@Crystalnachi
Жыл бұрын
Could you possibly spray with a UV shield to protect the sublimation?
@AngieHolden
Жыл бұрын
You can or most commonly they come with a UV protectant on them.
@dorisroot514
Жыл бұрын
ive been wanting make a wind spinner my ? is can wind spinners be done on any heat press ? because i cant find no info on anything using my press thank you :)
@dorisroot514
Жыл бұрын
ok sorry what is the protective paper called ????? ty
@AngieHolden
Жыл бұрын
Yes any heat press.
@AngieHolden
Жыл бұрын
Protective paper is from Artesprix.
@dorisroot514
Жыл бұрын
@@AngieHolden ok awesome tyvm
@carriecopus7075
Жыл бұрын
Would you use the same time and heat for a heat press instead of an easy press?
@AngieHolden
Жыл бұрын
I generally use whatever they recommend where I purchase the blank. And yes the same for both.
@robynrogers8101
Жыл бұрын
Any suggestions on how to send these to the customer? I don't know if they'll be able to fan them out.
@AngieHolden
Жыл бұрын
I would probably ship flat with a link to a video of you fanning one out. You can host the video on KZitem for free and give them a QR code or link to access.
@ellengreen4592
Жыл бұрын
What paper did you use to protect your heat press? I used butcher paper and the ink is now on my heat press mat 😢
@AngieHolden
Жыл бұрын
I use the protective paper from Artesprix.
@joslinbucholz7042
Жыл бұрын
What are you using as your protective layer? It looks like wax paper but not sure
@AngieHolden
Жыл бұрын
Protective paper from Artesprix.
@joslinbucholz7042
Жыл бұрын
Thank you. Could I also get the link to the mat you sublimate the spinner on
@wildroseheart
Жыл бұрын
Is protective paper the same as parchment paper?
@cherylemonroe9639
2 ай бұрын
how did you print an 8 inch wind spinner on a epson printer on a letter size paper, mine prints to small
@AngieHolden
2 ай бұрын
you should be able to print 8 inches! Try checking your settings and make sure you print actual size or 100%.
@brendaludwig5355
Жыл бұрын
My printer only does 8 1/2 x 11. My spinners are 10 inches. Is there anything I can do?
@AngieHolden
Жыл бұрын
You would have to piece together the prints. I am working very hard on a video that I hope to have done next week.
@nishabreezy5060
8 ай бұрын
What size did you print the photo for the middle
@AngieHolden
8 ай бұрын
I just measured the center of my wind spinner and make it about that size.
2 ай бұрын
Can’t find the list so that I can get the name of the mat. Can you please provide that?
@AngieHolden
2 ай бұрын
Click "more" under the short description of the video to get you there. Mat is from Artesprix.
@wendydavenport9783
4 ай бұрын
do you have a link for the butcher paper
@AngieHolden
3 ай бұрын
Try this: kzitem.info/news/bejne/26h7uJdjcoSreno
@margiehernandez9361
8 ай бұрын
How do these do outside? Do they hold up? Will they get ugly is rained on, etc.
@AngieHolden
8 ай бұрын
I would recommend a UV sealer to make them last longer.
@madelinecanavan5933
11 ай бұрын
Why, when I go to take my heat tape off, it pulls the design off with it and leaves a white showing underneath? It’s heat tape I’ve used before with success so I don’t understand why all of a sudden it’s pulling the design off with it?
@AngieHolden
11 ай бұрын
It is probably that your sublimation blank is poor quality and the coating is not adhered properly.
@maribethbieber1209
Жыл бұрын
Could I put the picture over the print or how do I do that
@AngieHolden
Жыл бұрын
Yea. I just laid it over in canva and printed.
@alicedonaldson4065
Жыл бұрын
Can you flatten a wind spinner after you opened it
@AngieHolden
Жыл бұрын
I have not tried. Sorry.
@hershey562039
6 ай бұрын
What is the trick when using a 10 inch spinner with 8.1/2 by 11 paper ? Please help
@AngieHolden
6 ай бұрын
You would have to join the prints which is tricky.
@hershey562039
6 ай бұрын
Ok thanks I will have to figure it out
@darlenecarpenter3865
10 ай бұрын
how do you do the photo in the middle of the background for someone who is not so tech savy
@AngieHolden
9 ай бұрын
I just added to Canva and resized/moved it around.
@robincottrill708
Жыл бұрын
I want to make some of these but not sure how to make a design with a photo in the middle please advise thanks
@AngieHolden
Жыл бұрын
I did something similar and showed the Canva steps here: kzitem.info/news/bejne/smx7vnaqjYGUa6w
@robinbeda8928
Жыл бұрын
Could you use htv or premium vinyl with theese
@AngieHolden
Жыл бұрын
You could add outdoor vinyl.
@JeanetteKeagy
Жыл бұрын
How do you get the photo to be round for the middle of the spinner?
@AngieHolden
Жыл бұрын
I didn't make this round. I just put a square photo in the center using Canva.
@amg73185
6 ай бұрын
Hi i followed your video and for some reason its bleeding through on some spots on the back side. Do you know what would cause that?
@AngieHolden
6 ай бұрын
Sounds like the ink is blowing out around the edges. Print with less ink.
@amg73185
6 ай бұрын
@AngieHolden ok thank you I'll try that. I have it set to the sublimation settings you recommended. It was alot of black wondering if that might have been why to
@AngieHolden
6 ай бұрын
Yes black is notorious for blowing out. Try altering to like a plain paper setting to use less ink.
@judylangsdorf6467
5 ай бұрын
Getting same bleeding with bright color ink too. How do you use less ink setting?
Пікірлер: 295