I can't find your Instagram I will be following you.
@DayTodayMarv
10 ай бұрын
Sorry had to change it for the brand it’s @Brazlexbespoke now
@MischiefOne
10 ай бұрын
@@DayTodayMarv im following
@mugiwara6213
2 ай бұрын
@@DayTodayMarv how do you keep the wax from moving after making it
@DayTodayMarv
2 ай бұрын
What do you mean? It’s sliding on your model or something?
@mugiwara6213
2 ай бұрын
@@DayTodayMarv its too loose on the model
@JMontanaTV
9 ай бұрын
Dental Assisting Student/Grillz Maker here - I fw your details and explanation. Also the non gatekeeping (that’s a black king right there) and I love this video
@DayTodayMarv
9 ай бұрын
Appreciate you bro 🙏🏾🙏🏾
@gumbo5637
5 ай бұрын
Yo i jus went to yo profile. Im excited to see yo skills luv. EFDA/ grillmaker here. Yo, do yo thang. I want to see u in the future. ML
@m-azing4052
Жыл бұрын
I started dying when he said “ohh wow this is a lot more work than what I thought it was gonna be” cuz I was thinking that same thing😂😂😂😂
@DayTodayMarv
Жыл бұрын
Lmao all facts
@bestrelaxingsleepsounds6407
8 ай бұрын
Bro I been doing this 4 so fkn long now using all these pretty good videos and yours are by a mile the best for all the reasons u saying¡! This shit helped so much felt like I was being taught it properly by someone keep that shi up 🤩
@DayTodayMarv
8 ай бұрын
Appreciate that bro we all gunna win ✊🏾
@JoshuaNorton
Жыл бұрын
That's actually such a well explained tutorial, I wish NileRed had watched it before making his pair. Now he made bulky trash that looks nothing like it's supposed to and is embarrassed to wear them.
@DayTodayMarv
Жыл бұрын
Broooooo I was saying the same thing. I was like damn if he watched the process first it’d be pretty good for him.
@AgateJeweler
Жыл бұрын
He ballin thoe
@emirhassan6510
Ай бұрын
Thank you for posting such a detailed video, huge respect to you for caring about your craft and paying attention to the details.
@FloydJordanTv
5 ай бұрын
“They don’t tell you that part!” Thank you so much bro.
@DayTodayMarv
5 ай бұрын
Ofc brudda 🙏🏾
@viictory.194
9 ай бұрын
Brother how do you smoothen the wax out? Do u have any other tips? Because i struggle a lot with it.. i would really appreciate it, thankyou brother 🫶🏼
@DayTodayMarv
9 ай бұрын
Hey bro, there are a couple ways. MAIN THING FRFR IS PATIENCE. But you can use an exacto knife, or the wax carving tools you basically wanna go over them with the sharp edge at a slight angle and gently scrape at the surface. The harder the wax the better so keep a bowl of ice water next to you. Another way once you’re trying to polish the wax to be even more smooth I learned is using a cut of pantyhose or a silk Durag. Pulling the silk over your index finger tightly and rubbing gently over the surface is also a decent way to smoothen it out.
@viictory.194
9 ай бұрын
@@DayTodayMarvI will keep these things in mind when im gonna try again. Thanks a lot 💯
@kathys.3420
2 ай бұрын
I admire your knowledge and the way you teach us
@DayTodayMarv
2 ай бұрын
@@kathys.3420 ayyy thanks same
@alphawolfjames9881
Жыл бұрын
Fun fact, Grillz were invented by a man named Eddie Plein from my country Suriname who moved to the U.S in the 70s. My grand parents era in my country was when people rocking one or two gold teeth was seen as a sign of wealth but that changed after a few decades and it was later looked at as 'ghetto' so a lot of people took theirs out. I spoke to him a while back and he told me "You can learn how to do it" and now I'm here. Thank you for this great video.
@DayTodayMarv
Жыл бұрын
that’s pretty dope man. Shouts out to Eddie for making it popular
@alphawolfjames9881
Жыл бұрын
@@DayTodayMarv absolutely! Salute! ✌🏾
@ryanlawson9051
Жыл бұрын
My Suriname brotha ay
@SunnJourn
5 ай бұрын
I disagree. Solomon in the Bible had grillz and that was well before the 70’s.
@DayTodayMarv
5 ай бұрын
@SunnJourn interesting gotta look into that
@trevorbarnet6236
8 ай бұрын
This was great. Very genuine💯
@tryptamineodyssey
Ай бұрын
Thank you Marv. This was invaluable. Cheers
@ttagirlcooking5990
Ай бұрын
Thank you for such a great video, with valuable information.
@victorceniceros8308
Жыл бұрын
Bro did the impossible. Talm bout he didn't do tha best, foh. Its perfect
@pacocunago6274
2 ай бұрын
What wax do you use? I’ve been dipping and hand painting on the wax with the wax tool straight onto the mould
@marissanicole375
2 ай бұрын
Love your video! Thanks!
@Mrantwon510
8 ай бұрын
is there a certain wax thickness you are suppose to use if you are planning to set diamonds?
@VisionItTv
11 ай бұрын
fantastic tutorial. Made me even more confident
@LatoyaMaroa
5 ай бұрын
Hii! May I ask what you use the heat gun for? In your Amazon list
@JapanFang
2 ай бұрын
Any tips for wax constantly slipping off model after applying non stick?
@theobesson9866
5 ай бұрын
Can I use a soldering iron instead of the wax pen?
@victorceniceros8308
Жыл бұрын
Hey Big bro how much gold or metal does it take to make 1 tooth cap? Or how many grams per tooth?
@DayTodayMarv
Жыл бұрын
HOW TO MAKE GRILLZ STEP BY STEP!! 🥶👍🏾👌🏾 kzitem.info/news/bejne/12-a0qd3ammIgYo in this video I pretty much go over everything when it comes to the grillz process. But if you’re just looking for that answer specifically I think you can skip near the end where I go over a formula that will tell you how to find how much metal you need
@lei9149
Жыл бұрын
Dope vid! Wouldn’t pushing into the gum make the cast uncomfortable for the customer?
@DayTodayMarv
Жыл бұрын
Thanks! And not necessarily everyone has about 2mm of free gingiva. For example the whole reason of flossing is to get that extra debris from under the gums and off the teeth.
@SoberPapi
Жыл бұрын
Hello brother so I wanted to start making griilz but some of the materials in the list ara unavailable can u make a new list with things that are available so I can order immediately? Or can I dm you somewhere so u can help me ?
@Yxung_tar
Ай бұрын
Yo bro could you name the alternative equipments for a beginner like myself
@ALXFLP
Ай бұрын
I wanna start making them but where do I buy the materials and turn it into silver and stuff
@DayTodayMarv
Ай бұрын
In the description
@YesIMreally_Torie
8 ай бұрын
Where did you , or how did you get the teeth models to place the wax on ?
@martinezsotodiego9059
2 ай бұрын
What type of was do you use??
@sp_lux3006
2 ай бұрын
What was the heat gun for because I didn’t see you use it cuzzy
@DayTodayMarv
2 ай бұрын
@@sp_lux3006 didn’t really need it much for this piece but basically. Just another method of softening up the wax. The hot water and the heat gun are interchangeable
@sp_lux3006
2 ай бұрын
@@DayTodayMarv Yh I clocked after I commented I was moving stupid love for that tho brother 🫶most in depth grill videos I seen out there big up
@DayTodayMarv
2 ай бұрын
Preciate it boss 🙏🏾
@DS-mw8bh
10 ай бұрын
What’s the ideal wax sheet thickness bro?
@blackz1692
10 ай бұрын
So can you do a video with you showing the equipment how much and so fourth
@DayTodayMarv
10 ай бұрын
Funny enough this is the next video lol
@sambrown7033
Жыл бұрын
Bro how u releasing this right as I start learning, appreciate the wisdom 🙏🙏
@DayTodayMarv
Жыл бұрын
Ayyyyyy glad it was in good timing!
@RhysDubison
Жыл бұрын
what did you use as your wax separator?
@DayTodayMarv
Жыл бұрын
Baby oil but you can also use model adhesive spray
@mar4856
18 күн бұрын
what kind of wax it is?
@jeanfallah4161
Жыл бұрын
could you make a video on the teeth impression/mold process?
@DayTodayMarv
Жыл бұрын
Yes that’s actually a simple process that I can make pretty fast! Aiming for the end of the week!
@BrandonNdlovu-u9g
Ай бұрын
How thick the wax ?
@josef_cmolik
4 ай бұрын
for what did you/he used that heatgun??
@DayTodayMarv
4 ай бұрын
Didn’t. But if you wanted to, you can use it to heat up the wax when molding on to the model to make it more malleable.
@STARZldnlyfe
5 ай бұрын
Can you do a video of where to get materials
@DayTodayMarv
5 ай бұрын
First link in the description my friend
@jonahgarcia8089
10 ай бұрын
My wax pen only gets to 200 and sometimes the wax cracks is it because it’s not hot enough?
@DayTodayMarv
10 ай бұрын
Sounds like it, wax cracks when cold either that or your pressing too hard.
@Mwellmac
6 ай бұрын
Curious after adding the wax to the print why not dip the whole thing back into hot water so you can make it a tighter fit? Is there something wrong with this concept
@DayTodayMarv
6 ай бұрын
Not a bad idea you can do it like that. Honestly when doing a waxup you can do anything that works
@Mwellmac
6 ай бұрын
@DayTodayMarv right on.. ya lot goes into the process.. I watched the other videos and am considering this as where im located Id be the only guy for miles. Any tipsnon sourcing the gold, silver for the casting?
@DayTodayMarv
6 ай бұрын
@Mwellmac dope man! But funny enough I’m working with the same issue now when it comes to getting better priced materials. The main company I’m working with is rio grande.
@Mwellmac
6 ай бұрын
@DayTodayMarv any idea where I can see how to do plating? Like after casting .925 plating with gold etc?
@DayTodayMarv
6 ай бұрын
@@Mwellmac not atm unfortunately
@LupitaG-cr8ff
11 ай бұрын
How did you get it out?
@melaniepetrona
4 ай бұрын
Great video! I was wondering how you deal with shrinkage after casting? I have found that my model’s dont fit great afterwards 🥲
Hey can you send a link for the wax sheet mold and also the concrete mix you used for the teeth - greatly appreciated
@DayTodayMarv
10 ай бұрын
Description!
@checlements6699
Жыл бұрын
Where do u get the models from or do u have to make them ?
@DayTodayMarv
Жыл бұрын
How to make a mold of your teeth (grillz dental impression) kzitem.info/news/bejne/0Xt5v3Vtf313pno
@laz-e-gamer
Жыл бұрын
Did you use just one layer of wax or two? And what gauge
@DayTodayMarv
Жыл бұрын
I used one but you can use two. The downside of that is that this makes your wax weigh more which in turn makes you have to charge more cause you’ll have to use more metal and then your piece will be heavier.
@laz-e-gamer
Жыл бұрын
@@DayTodayMarv thanks I asked because I actually started using more wax I was scared one sheet would be too thin
@gogetterjewlers
Жыл бұрын
@@DayTodayMarvhey bro the advice was helpful got 3/3 casting this is my Buisness account but I wanted to know if it was possible to have a 2 hr burn out
@DayTodayMarv
Жыл бұрын
You can do a 2hr burnout. Normally they’re 1-2 hrs. Sometimes 2-4 depending on the metal being used
@gogetterjewlers
Жыл бұрын
@@DayTodayMarv can I have a schedule?
@AlexanderHorsdalThomsen
Жыл бұрын
Bro how you get the wax mold off the dental mold? Do you cast it with the dental mold
@DayTodayMarv
Жыл бұрын
Aaaahhhhhh shiiitttt someone ain’t watch the full video lol 😂. But nah woe you just either spray “mold release spray” or put baby oil on the model before doing the wax up
@DayTodayMarv
Жыл бұрын
Aaaahhhhhh shiiitttt someone ain’t watch the full video lol 😂. But nah woe you just either spray “mold release spray” or put baby oil on the model before doing the wax ip
@AlexanderHorsdalThomsen
Жыл бұрын
@@DayTodayMarv tried it before but never used baby oil so I’ma try that, but shouldn’t it be way easier just casting as is and not pulling it off the dental mold? It would be more precise
@DayTodayMarv
Жыл бұрын
@@AlexanderHorsdalThomsen probably, I’ve never tried it that way before. I have some dental friends that do it in a way like that but I’ve never done it.
@AlexanderHorsdalThomsen
Жыл бұрын
@@DayTodayMarv thanks for the video keep grindin’
@Camryn-uv5zw
Жыл бұрын
You videos good I watch you grillz from wish
@DayTodayMarv
Жыл бұрын
Ayyyy thanks man. Funny enough that video inspired me to start making grillz.
@DetroitFredo
Жыл бұрын
pls show us how to cast it with silver or gold and add diamonds even if its a middleman process
@DayTodayMarv
Жыл бұрын
It’ll be in the works my man! Out of the country at the moment!
@kendrickfromthe90s
3 ай бұрын
U the goat
@seymonelewis2223
10 ай бұрын
Thank you
@DayTodayMarv
10 ай бұрын
Glad it helped man 🙏🏾
@1traphouse
Жыл бұрын
Thank you so much for the list ❤❤
@rnodev3972
Жыл бұрын
Where can i send my wax molds for casting? I don’t live near a jewelry district, and a lot of jewelry manufacturers don’t offer casting services unless you have a business. Do i need to invest in casting equipment?
@DayTodayMarv
Жыл бұрын
Hey I’m gunna make a video on this soon but you pretty much have the gyst of it. Bein real with you if you’re old enough form an LLC it’s really simple and gives you access to many discounts and other things they only give businesses. Depending on your state/country you may have different requirements for forming one but. Research a bit online. The video soon come tho, ill have it mad informative as this one was.
@Camryn-uv5zw
Жыл бұрын
They cool
@nunchuckchuck3094
8 ай бұрын
Yo bro what’s the instrumental at the beginning?
@DayTodayMarv
8 ай бұрын
I’m not even sure lol. Gotta see if I can find it but I’m not even sure
@GasWrapz
Жыл бұрын
How thick are these wax sheets?
@DayTodayMarv
Жыл бұрын
20ga
@yasmineroseboro8063
8 ай бұрын
New subby 😊
@specialpixiedust
Жыл бұрын
What’s link for wax
@DayTodayMarv
Жыл бұрын
amzn.to/3Y3XfAi sorry for the late reply!
@samamore32
Жыл бұрын
Do you need a license or permit to make these?
@DayTodayMarv
Жыл бұрын
In some states I know you need a license to take molds of the peoples teeth. Such as being a dental assistant. Or something in that field. But that’s the only thing I’ve heard.
@domfromgettemmobb2218
Жыл бұрын
Put the items you named in the description
@DayTodayMarv
Жыл бұрын
Click the link my boy
@Camryn-uv5zw
Жыл бұрын
Ok good
@johnsantivasci2223
Жыл бұрын
I can't find part 2, unless i'm skipping over it somehow.
@DayTodayMarv
Жыл бұрын
Oh nah, it’s coming soon lol sorry. Been out the country for a little so haven’t had a chance to make the video
@lordmikimonday
Жыл бұрын
Do you have courses?
@DayTodayMarv
Жыл бұрын
At the moment no, but I’ll have courses soon on how to make grillz with CAD design software. Right now I’m making sure I can effectively provide information on a detailed process like this one.
@lordmikimonday
Жыл бұрын
@@DayTodayMarv thanks bro. Definitely need that cad. You use blender or rhino?
@lordmikimonday
Жыл бұрын
@@DayTodayMarv I pay right now to know what you know. Got link to the expensive machine?
@18sznz
Жыл бұрын
2:28 kinda like your cuticles
@zlata-massajist
Жыл бұрын
А как называется этот пояльник
@DayTodayMarv
11 ай бұрын
восковая ручка
@victoryredcolorado
Жыл бұрын
Your definitely not a dental tech 😅
@DayTodayMarv
Жыл бұрын
Lol dental assistant
@iblingu
5 ай бұрын
lol. now take them off the rock. good luck!
@mugiwara6213
2 ай бұрын
Thats what the oil is 4
@kingneptune2136
2 ай бұрын
I have 109$ can you make me grillz
@DayTodayMarv
2 ай бұрын
Depending on the material we can make something work with 1 or 2 teeth.
@SmokinShaunTv
5 ай бұрын
Why tf do people call it grillz , if anything it’s a grill. Grill is slang for mouth. Grillz is yt washing it
Пікірлер: 146