In the film, I show how you can make a kitchen table, a dining room table, or an industrial loft-style desk in a quick and low cost way.
I bought a table top in a carpentry workshop and legs on an auction site.
The table top is made of beech wood. All you had to do was prepare the worktop and put it all together.
I did it because I do not have the conditions to make glued tops and I think that I would spend too long welding the legs. So reason won over ambition.
The stage of work was as follows:
Sanding the edges of the countertop with 100 grit, then sand the edges and the worktop on both sides with 220 grit.
After dust removal, I secured the table top with oil and wax on both sides.
After applying the first layer, sand it dry and apply a second layer.
After applying the second coat and waiting 30 minutes, I wiped off the excess with a polisher.
This is not a method recommended by the manufacturer, but according to saves us work at the end.
After 24 hours, it was possible to screw the legs with wood screws.
In this way, a stable table was created for years.
Негізгі бет How to make modern industrial table - simple way. One hour of work.
Пікірлер