QOTD ⚡What predator props would you like me to make next? Next video : How to make Predator's Helmet with cardboard ➡️ kzitem.info/news/bejne/unh6t6yPspuYraA
@kennethdesales3888
4 жыл бұрын
The plasma cannon
@thexenohunter5355
4 жыл бұрын
The Wrist Computer.
@twleo2sean5
4 жыл бұрын
Definitely plasma cannon
@EpicCardboardProps
4 жыл бұрын
I might make this one too 😉
@clutch1465
4 жыл бұрын
THE CHEST PIec AKA BODY PIEC oops caps
@eduardonu3433
3 жыл бұрын
Thank you SO MUCH for the tamplates, Raphael! I've just finished this morning, and it's AWESOME!!! But i have also found some issues on the templates. The templates said that the blades should be 0.5 cm thick, and to make 4 of them. But I then realised that the blades were too thick and I had to flatten them. But it worked in the end. Anyway, thank you, you are the best!!! :)
@EpicCardboardProps
3 жыл бұрын
Wonderful! Happy to hear that. About the thickness of the blade, the thickness is the initial state of the cardboard I used, so it is correct but I indeed flattened before glueing them on top of each other, and I realised after uploading the tutorial that I had forgot to show that in the video, then it was too late, so it's totally my mistake. But I will correct that in the templates asap, thanks for the head's up.
@diycardboardmagic7219
4 жыл бұрын
There is no cheaper and more easily available material for crafting and model making than cardboard because lets face it, nothing is as cheap as free! Absolutely love your stuff, you're an inspiration!
@EpicCardboardProps
4 жыл бұрын
Oh that's nice DIY Cardboard Magic, thank you!
@artsy_dragon_creations
3 жыл бұрын
I somehow missed this video! This is awesome! I’ve never seen someone make Predator blades that look this good and actually work properly. I’ve usually seen ones that only extend a few inches and have very plain designs, but with how much these blades extend and how the blades only go a bit past the knuckles when closed, these are way better
@EpicCardboardProps
3 жыл бұрын
That's a nice compliment! Thank you Brent Langford, I'm glad you like it!! 🙂
@Mokso
4 жыл бұрын
Raphael You will reach the 1 million subs sooner then you think :) Yesterday you gained more subs than me :) Amazing work!
@EpicCardboardProps
4 жыл бұрын
Thank you Mokso! Haha I don't know about that but what is happening to my KZitem channel at the moment is crazy! I make more than 1k subs a day lol I don't know if it will last but that's sick! I also made some AB testing with my thumbnails to make more realistic ones as you recommended it, and you were right it is helping significantly too! :)
@Mokso
4 жыл бұрын
@@EpicCardboardProps I am happy for you Raphael :) Your subscriber/viewer ratio is crazy too! See you at the top :)
@Victess
4 жыл бұрын
Honestly this is the best cardboard predator's gauntlet I've seen so far
@EpicCardboardProps
4 жыл бұрын
That's a nice compliment Dusk Spyder! Thank you!
@JamesThomas-jf3eq
4 жыл бұрын
I've always said to people that cardboard is such a useful thing to Have, that with just a bit of creativity you can make anything with it, I've been laughed at for that comment, thank you so much for proving my point
@EpicCardboardProps
4 жыл бұрын
It really is! You were right without questions. Thanks for the kind words James.
@lixinyang8427
4 жыл бұрын
Yes, good job
@nieliestales4703
4 жыл бұрын
Wow it's greatly done you made it like it's real. I love your craft. I watch your channel everyday.
@EpicCardboardProps
4 жыл бұрын
Thank you Nielie's Tales! I do appreciate it
@Kleintje44
4 жыл бұрын
I realy love how you can make a realistic prop from only a carbord box i’m mind blown and i realy love this one 🤯
@EpicCardboardProps
4 жыл бұрын
That's a nice compliment! Thank you STAN VAN DEUVEREN!!
@darthcadman
4 жыл бұрын
"What Predator props do you want me to make next?" Are.....are you being held hostage by a Predator and being forced to re-arm him? Blink once for yes twice for no.
@EpicCardboardProps
4 жыл бұрын
😰😨 I can't speak freely about that here...... sorry
@_dxrk_1
4 жыл бұрын
Haha
@ALFIEW16
3 жыл бұрын
@@BennyCFD 𝚢𝚎𝚜.
@Hrsh868
3 жыл бұрын
@@EpicCardboardProps We should start a revolt, use your other wepons against the Predator, he will not harm you! Lolol
@ugarmy6983
3 жыл бұрын
You made this perfect and real and then i know i don't waste my time i made this
@addiecooper1981
3 жыл бұрын
LOVE THIS SO MUCH!!! My son and I are giving it a go. I was thinking about using dowels as I am having a hard time with the cardboard rolls. What diameter would you say the rolls are supposed to be?
@EpicCardboardProps
3 жыл бұрын
Glad to hear it! :) About the rolls if you're not using cardboard it's difficult to tell, I'd say if you use rolls that are 7 to 10 mm thick it should work fine
@thelocalmustacheman2649
4 жыл бұрын
OH MY GAWWWDDDD!!!! YOUR AMAZING!!! Dude, you make Star Wars, Predator, The Terminator, A FRIGGEN XENOMORPH! Your my new favorite DIY man 😁😁
@EpicCardboardProps
4 жыл бұрын
Haha thank you very much The Local Mustache Man!! Glad you like them!
@EpicCardboardProps
3 жыл бұрын
@rudra kirti Thanks for noticing it! It's not an easy thing to do as I get A LOT of comments lol But I try to do my best to do so :)
@sleyder891028
4 жыл бұрын
WOW. Amazing. It is an epic design.
@EpicCardboardProps
4 жыл бұрын
Thank you Sleyder Quintero! I do appreciate it
@oli_ing819
4 жыл бұрын
Someone please tell me why 36 people disliked this video
@purpleguy947
Ай бұрын
@@oli_ing819 They are haters
@purpleguy947
Ай бұрын
They are haters
@nicomorgado1916
4 жыл бұрын
The plasma cannon!!! Like to make this boy see it
@EpicCardboardProps
4 жыл бұрын
This one is on my to do list already, just a matter of time Nico morgado!
@ZEDDATOR
4 жыл бұрын
This build is amazing!! I can pair it up with the predator mask I'm also making! And of course I am making the predator mask using your video!! 😁
@EpicCardboardProps
4 жыл бұрын
So glad to hear it Animator ManiaX!! Don't hesitate to ask me you have questions while you work on them. I'm always here to help!😉
@nolongerused.3025
4 жыл бұрын
Predator with the Infinity Gauntlet will always be the best thing.
@EpicCardboardProps
4 жыл бұрын
Haha agreed!
@stefanlechner1501
4 жыл бұрын
I just found your channel and i am deeply impressed of your work! Some Ideas from me for your next builds: Saurons Tower Smaug Laputa Hellboys arm Zorgs ZF-1 Weapon or the taxi from the Fifth element a Jaeger or a Kaiju from Pacific Rim Godzilla Kanedas Bike
@EpicCardboardProps
4 жыл бұрын
Thank you Stefan!! Actually some of these are on my to do list already, like theZ F-1, saurons Tower and Helboy arm! I'll definitely think about the other ones 😉
@govindanashwin
2 жыл бұрын
Bro that's cool great job on making a wrist band that actually works
@EpicCardboardProps
2 жыл бұрын
Glad you like it Ashwin! :)
@patrickgituku7964
4 жыл бұрын
Amazing make more like mandarin's helmet in iron Man amord adventures
@michaeltieng5393
3 жыл бұрын
Mandarin? Like an orange?
@amitabhkumar6718
3 жыл бұрын
@@michaeltieng5393 no the Mandarin in Iron man 3
@TormaTOS
3 жыл бұрын
@@amitabhkumar6718 he doesn't have a helmet
@amitabhkumar6718
3 жыл бұрын
@@TormaTOS he has I think in iron man armoured adventures
@TormaTOS
3 жыл бұрын
@@amitabhkumar6718 okay
@elbevopr2867
4 жыл бұрын
The predator is very cool 👍
@diypropsandeffects1958
4 жыл бұрын
Make plasma cannon😁 That would be so cool
@EpicCardboardProps
4 жыл бұрын
This one is on my to do list already, just a matter of time Diy Props and effects!
@diypropsandeffects1958
4 жыл бұрын
Ok thats good to know ill stay tuned for that😁 Also Im( bobble heads) all I did was change my acount name😊🤗
@kjartangudmundsson8410
4 жыл бұрын
Diy Props and effects its plasma caster
@diypropsandeffects1958
4 жыл бұрын
Good to know kjartan😊
@alfredopuma639
4 жыл бұрын
YEEESS
@francescodivincenzo3840
4 жыл бұрын
Hi Raphael ...your stuff is sooo cool!💪what about Masters of the Universe...do you know that? I am also a hobbyist and would like to recreate something from your motu area .... maybe the sword? many greetings Keep it up
@jacobrow11
4 жыл бұрын
I'm a big fan of the predator if he was real i'd be his comrade and best friend
@christinejohnson2939
4 жыл бұрын
And also it's trophy
@itsalbertobro7353
4 жыл бұрын
He probably kill u first
@meteoldrago7092
4 жыл бұрын
I am his biggest fan
@leovaldezgaming2998
2 жыл бұрын
thank you i am so glad the templates are legit.
@EpicCardboardProps
2 жыл бұрын
Glad you like them Leo! there is a lot of time and work into these so I do appreciate that :)
@chaoslantern
4 жыл бұрын
Is there anyway to get notifyed when these templates are available ? I NEED to try this lol. Also a predator head with working mandibles would be great :)
@EpicCardboardProps
4 жыл бұрын
Sorry usually the templates are available right away but I forgot to make this one available on shopify yesterday. But they are available to download now 😉
@isabelchitungo7367
4 жыл бұрын
Man you are so artistic when it comes to making cool movie props out of cardboard
@EpicCardboardProps
4 жыл бұрын
That's a nice compliment! Thank you Tinashe Chitungo!!
@alexszabo3208
2 ай бұрын
Your predator props are awsome I made the predator mask and it ternd out amazing!!👍🎉😄😀
@EpicCardboardProps
2 ай бұрын
Glad to hear that Alex!!
@alexszabo3208
2 ай бұрын
A predator spear that is retraktable and work!!😍😁
@EpicCardboardProps
2 ай бұрын
Thanks for the idea! I'll look Into it ;)
@jorgelas6459
4 жыл бұрын
you are a artist
@EpicCardboardProps
4 жыл бұрын
Thank you Jorgelas! I do appreciate it
@nateninja5500
3 жыл бұрын
Incredible!! Can't wait to try making my own predator gauntlets! And a great vid tutorial thanks brother!
@EpicCardboardProps
3 жыл бұрын
Any time! 🙂
@dbexodia10
4 жыл бұрын
Would absolutely LOVE to see the Predator Wrist Computer or the Plasma Castor.
@EpicCardboardProps
4 жыл бұрын
Both of them are on my to do list already, just a matter of time 😉
@alfredopuma639
4 жыл бұрын
ERES UN ARTISTA HERMANO!!! YOU ARE AN ARTIST BROTHER!!!
@EpicCardboardProps
4 жыл бұрын
Thank you very much Saul Puma!!
@abrarhaider4933
4 жыл бұрын
Thir prop is very amazing and i did'nt bore when i watching your props
@EpicCardboardProps
4 жыл бұрын
That cool thanks Abrar!
@Linux-0001
4 жыл бұрын
Awesome work as always ! Continue comme ça vieux ;)
@vijayaupadhyay3134
4 жыл бұрын
Mind blowing!!!!!!!!!!
@EpicCardboardProps
4 жыл бұрын
Thank you very much Vijaya Upadhyay!!
@vijayaupadhyay3134
4 жыл бұрын
@@EpicCardboardProps bro you will soon get silver play button
@sebastianmedinareyes1297
3 жыл бұрын
One epic accesory of predator is the Boomerang, that would be great
@EpicCardboardProps
3 жыл бұрын
That would be cool I agree Sebastian Medina Reyes! Actually I've been thinking about making it lately, I still have to think about it but it's likely that I'll do it eventually 😉
@starlord7027
4 жыл бұрын
Yeah, you just outdid yourself. This is insane dude. Awesome work
@EpicCardboardProps
4 жыл бұрын
Haha thanks a ton Star Lord! Glad you like it.
@Jyotikatariya31
4 жыл бұрын
Thanks for this video
@BILLTHORPE
4 жыл бұрын
Thats incredible!
@EpicCardboardProps
4 жыл бұрын
Thank you very much GAMES made of CARDBOARD!!
@focalozoelzoso5768
25 күн бұрын
Hi, your design is incredible, how resistant it is? and I would like to paint it silver so that it looks more realistic Do you recommend I use a specific type of paint?
@EpicCardboardProps
25 күн бұрын
Thank you! All things considered, it is quite sturdy. I made mine years ago and it is still looking and functioning like on the first day. For the paint, I recommend you to use acrylic paint as it is a thick and opaque type of paint as opposed to water based paint that will soak the cardboard leading to very poor result (without a primer applied first, if you apply one you can use pretty much any paint you want...) 😉
@GBScorpion716
3 жыл бұрын
you are a crazy artist my kid watch almost every day just like good morning song to see how you make predator gadgets
@EpicCardboardProps
3 жыл бұрын
That's sweet! Glad they like my videos! 🙂
@GBScorpion716
3 жыл бұрын
my kid name is Gabriel and he says thanks for the heart and he also like the gauntlet u made its fabulous
@sthurziknabooru9371
4 жыл бұрын
could ya make a chest burster? or even a face hugger from alien? i think that'll be super cool!!!
@EpicCardboardProps
4 жыл бұрын
I don't know about the chest buster but the Fachugger is on my to do list! Just a matter of time 😉
@parzivalalchema5870
2 жыл бұрын
Aight! I'm done with my Thanos Gauntlet for left hand and Imma make this to my right hand
@ChurchOfShinrisPecs
3 жыл бұрын
i would LOVE to see you make the Predator shoulder canon!!!
@EpicCardboardProps
3 жыл бұрын
That would be so cool I agree Rain! Actually I've been thinking about making it lately, I still have to think about it but it's likely that I'll do it eventually 😉
@hunterdavis7404
3 жыл бұрын
No one: Epic cardboard props: Predator go roar
@josephinekayoso9861
3 жыл бұрын
sir you are amazing God of crafts
@EpicCardboardProps
3 жыл бұрын
That's a nice compliment! Thank you Josephine Kayoso!!
@deepseacocoon
4 жыл бұрын
I’m so glad I found your channel. I first found you because of the millennium falcon, and I was blown away. Little did I know that you have made models even more impressive than the falcon
@EpicCardboardProps
4 жыл бұрын
That so nice of you thanks for these kind words Mogana!
@johanking8379
3 жыл бұрын
I'm watching this again during quarantine
@Scarface5678
4 ай бұрын
I bet predator was talking notes before they had wrist blades
@henrygil240
Жыл бұрын
Muchas gracias amigo que excelente trabajo 👍
@shamimansari28
4 жыл бұрын
I swear if I get a shout out from him ... I can die peacefully
@wcsg8891
2 жыл бұрын
as a substitute for the bulky string and grip that you hold and pull for the release maybe you could use fishing wire with a loop around one of your fingers
@EpicCardboardProps
2 жыл бұрын
It may work too indeed! ;) But as you need to pull quite hard to release it, fishing wire wrapped around a finger might be very uncomfortable in doing so
@jezzatg4127
4 жыл бұрын
Wow your very talented
@EpicCardboardProps
4 жыл бұрын
Thank you so much 😀
@victorprivado1351
3 жыл бұрын
U made that just in cardboard that's so genius
@EpicCardboardProps
3 жыл бұрын
Glad you think so Victor! :)
@frankieparzival4674
4 жыл бұрын
It's amazing!!! For the next video: the shuriken of the Predator please!!!
@EpicCardboardProps
4 жыл бұрын
Thanks for the suggestion Frankie Parzival, I'll think about it
@parzivalalchema5870
2 жыл бұрын
Just a question, using the boxes on the thumbnail as reference, how many boxes does this craft need??
@EpicCardboardProps
2 жыл бұрын
The ones you see on the thumbnail should be enough, if you cut the pieces efficiently. But take into account that you also have to use different thickness of cardboard. The thickness of each is mentioned on the templates, but usually it goes from 0.2 mm thick to 0.5 mm thick. ;)
@karolinaparizkova2386
4 жыл бұрын
Wow have known you for only 24 hours, but I can say, that this channel is going to be amazing! Just from cardboard? There are many videos on YT about Diys...But they often use hard to get materials... Cant wait for summer break to start diying! Thank you!
@EpicCardboardProps
4 жыл бұрын
Thanks and welcome Karolina! That's a really nice comment 🙂 if you make one of these , don't hesitate to ask me if you have quest while you make it, I'l try to help you as much as I can.
@goldenpanther3681
4 жыл бұрын
I wish i had the skills like him He make the best stuff
@EpicCardboardProps
4 жыл бұрын
That's nice Kingkiah, but I'm sure you could do it too! Just a matter of practicing 😉
@ChiragMehta14
4 жыл бұрын
U are the first youtuyoutuber who reply to all the comments even though uhave a lot of subscribers
@EpicCardboardProps
4 жыл бұрын
Thanks for noticing this Chirag! I try to do my best to do so, and it's not an easy thing to do! lol
@ChiragMehta14
4 жыл бұрын
@@EpicCardboardProps Yes sir you are really hard working
@toggsy5663
Жыл бұрын
Oh my god, another epic piece, I can imagine you building the shoulder mounted plasma blaster prop, have full set lol
@EpicCardboardProps
Жыл бұрын
That would be awesome I agree, actually I'm about to post another predator props, well not a props as it is a Predator mask (not the helmet, his face...) It's gonna be posted tomorrow!
@toggsy5663
Жыл бұрын
@@EpicCardboardPropsAwesome. I look forward to that. 🙂👍
@Chez2771
2 ай бұрын
Hey epic cardboard props ca you take into consideration that can you make the predators plasma caster
@israelflores5573
3 жыл бұрын
podrias acer el proyectil de depredador que lleva en la espalda
@surfwaysubbers1130
4 жыл бұрын
Every thing you do is awesome
@EpicCardboardProps
4 жыл бұрын
That's a nice compliment! Thank you MadMatter 132!!
@jackie3412
4 жыл бұрын
your work is so cool but I have a question, do you make all your templates by yourself?
@EpicCardboardProps
4 жыл бұрын
Thank you Jackie! I make them from scratch looking pictures on google so yes I make all templates by myself.
@craneo2466
2 жыл бұрын
Ola bundia exelente gracias x conpartir tu conosimiento pues es una forma de aprender y por que no un ingreso para la familia
@marcosy37
10 ай бұрын
will you make a full costum of pretador
@EpicCardboardProps
10 ай бұрын
It may happens at some point! 🙂
@lavagon1163
3 жыл бұрын
I loved your voice and I love Predator!
@EpicCardboardProps
3 жыл бұрын
That's nice CottonBunny 1163, thank you!
@bryananimations1300
3 жыл бұрын
Your creations are so helpful I made this one as well 👍
@EpicCardboardProps
3 жыл бұрын
Congrats Bryan! I'm glad you enjoy my work
@leoglanninger7112
4 жыл бұрын
You know what would be cool? Darth Vader helmet
@EpicCardboardProps
4 жыл бұрын
This one is on my to do list already, just a matter of time Leo Glanninger!
@TheGeronimojack
4 жыл бұрын
Great work! Excellent video. Have you ever thought of making Star Wars props? How about a Grinidan helmet/mask? He was the Ferryman in the first episode of The Mandalorian and the Imperial Snitch in the first Star Wars movie.
@EpicCardboardProps
4 жыл бұрын
Thank you TheGeronimojack! Well actually I've made several Star Wars props and things, like the Millennium Falcon, Kylo Ren's helmet and many more! You'll find all of them on my KZitem Channel too 😉 And thanks for the suggestion, might be a great one to make indeed I'll think about it
@EricDG326
4 жыл бұрын
If you want a Predator prop that would really be a challenge, you know what would be awesome? If you could make the jaws. And make them actually flex.
@will_themaker
4 жыл бұрын
Continuing to impress! First the mask, then the blade! Awesome!
@EpicCardboardProps
4 жыл бұрын
That nice thank you very much William!
@Chiefiess
4 жыл бұрын
Omg you Are god Is it a realy nice video
@EpicCardboardProps
4 жыл бұрын
That nice thank you Montarysta!! Will you give it a try? :)
@danielborg4928
2 жыл бұрын
Thats cool. You could use the same concept to make the hidden blade from the Assassin's Creed Franchise.
@EpicCardboardProps
2 жыл бұрын
I think it would work too indeed :)
@rhysnybo3420
Жыл бұрын
Wow this is totally epic very so realistic and looks just like it in the Predetor movie series I absolutely love the device used for the blades effect good job on it 👍
@EpicCardboardProps
Жыл бұрын
Thank you so much!!
@rhysnybo3420
Жыл бұрын
@@EpicCardboardProps Your very much welcome 🙂
@geodimit28
Ай бұрын
Hello I love your videos I just bought this and the predator head can I use craft foam to make them I need them for a cosplay
@EpicCardboardProps
Ай бұрын
Thanks for purchasing the templates! I think you can use foam, but since these tutorials have been designed entirely with cardboard in mind, you will have to modify some steps along the way, using techniques that suit foam better. ;)
@mypassiveincomehustle4748
Жыл бұрын
Almost finished and pretty happy with how it is looking. Had some major issues with some things just not fitting though. Didn't realise the blades had to be flattened and other pieces. The trigger won't work on mine correctly as it catches on other parts of the build but it looks fabulous!
@EpicCardboardProps
Жыл бұрын
I know that the trigger mechanism is a bit tough to get right, that because cardboard i a very soft material... The trick is to make very tight rolls so that they are as hard as possible, that way the strings and elastics can perform correctly, without catching on other parts when you trigger it! 😉
@hobbiescore7344
4 жыл бұрын
That is awesome
@EpicCardboardProps
4 жыл бұрын
Thank you very much!!
@kothant5464
4 жыл бұрын
Like this...Amazing skill
@EpicCardboardProps
4 жыл бұрын
Thank you very much Ko Thant!!
@bubzboy9009
4 жыл бұрын
You are the best craftsman you deserve a lot more subscribers
@EpicCardboardProps
4 жыл бұрын
Thank you Bubz Boy, I appreciate it
@foxygamer2944
8 ай бұрын
wow this is amazing I was triing to find a video like this I bought the product and did it it is amazing
@EpicCardboardProps
8 ай бұрын
Glad you like it Foxygamer2944! I hope you enjoyed the build :)
@bomukuk6190
4 жыл бұрын
Amazing!! Love it!! ❤️❤️💪👍
@EpicCardboardProps
4 жыл бұрын
Glad you like it! Thank you!
@TwoToasty06
4 жыл бұрын
That’s really cool, I made both gauntlets, knee armor, shoulder armor and the belt armor all out of cardboard. I think it’s cool that you can use cardboard and other local items to make something so realistic and cool. I really love the work you do
@EpicCardboardProps
4 жыл бұрын
Thanks for the kind words, I appreciate that.
@joaquinmuro3465
4 жыл бұрын
So cool
@EpicCardboardProps
4 жыл бұрын
Thank you!!
@romanmasesar4118
4 жыл бұрын
Love the mini skit in the intro amd yet again the prop is super screen accurate and super cool
@EpicCardboardProps
4 жыл бұрын
Thank you Aguy!! Always cool to see you in the comments, I do appreciate it.
@arzyder7009
4 жыл бұрын
That is amazing. My son asks me to make this tool every day. I would appreciate if you send me more detailed instruction (size e tc)
@EpicCardboardProps
4 жыл бұрын
Glad to hear it Arzy! You'll find all templates required to make this build in the description box below the video 😉
@enderfries6213
4 жыл бұрын
You have some skill bruv....awesome prop
@EpicCardboardProps
4 жыл бұрын
Thank you Salman Umar! I do appreciate it
@thefall1n143
4 жыл бұрын
Maybe you could do the plasma caster
@EpicCardboardProps
4 жыл бұрын
This one is on my to do list already, just a matter of time TheFall1n1!
@nightowlcustoms5391
4 жыл бұрын
These suggestions are not from a movie however I’ve only ever seen them 3D printed; I would love to see the Thorn hand Cannon from Destiny and the Helm of Saint 14 also from Destiny, also an actual predator head would be cool as well
@EpicCardboardProps
4 жыл бұрын
That would be cool to make an actual Predator head I agree FROSTED Savage! Actually I've been thinking about making it lately, I still have to think about it but it's likely that I'll do it eventually. About the Destiny ones, unfortunately it has to be a movie props/thing to be aligned with the topic of this channel. But maybe one day when they'll make a movie from it! Hollywood does that a lot, so you never know 😉
@mrimperialcj8551
4 жыл бұрын
Dude,you really helped me in making of predator helmet bro thankyou soooo much..I'm gonna try to make this one now,one more thing bro I love ur music can I know the of the background music😍😍
@EpicCardboardProps
4 жыл бұрын
Thanks for the kind words! I'm glad it helped you! About the music all songs I use come from the website Epidemic Sound, but it's a paid subscription though.
@mrimperialcj8551
4 жыл бұрын
@@EpicCardboardProps thanks,keep making interesting things.😊
@lucianoremixes
4 жыл бұрын
HOLY SHIT!!!!!! ill be making this (or at least trying) soon. My son turns 6 in 8 days and is absolutely obsessed with all things AVP. he'll love it!!!!!
@EpicCardboardProps
4 жыл бұрын
That's awesome!! Don't hesitate to ask me you have any questions while you'll be working on it, I'm always there to help! 😉
@lucianoremixes
4 жыл бұрын
Thank you brother!! Already got the template from your site last night. Now to just get all the materials. My only concern is this template is for an adult arm. I might run in to some difficulty trying to size it down to his small 6 year old arm. 🤷♂️
@ZGHFF
3 жыл бұрын
They are good for combat
@SandozAthava
6 ай бұрын
Biggest fan ❤❤❤❤❤❤❤❤❤❤❤❤❤😮😮 super interesting
@jmasonrcingabout273
4 жыл бұрын
Great show, I love your builds. Idea for your next build. 1980s ROBOCOP helmet or gun or even the full suite.
@EpicCardboardProps
4 жыл бұрын
As I'm a big fan of this movie, I'd love to make one of these! Actually I've been thinking about making the helmet lately. I'm not sure yet but it's likely that I'll do it eventually 😉
@eubuellen5447
4 жыл бұрын
Wow !❤Captain america wakandan shield will be nice to see in ur collections🤙🤙
@EpicCardboardProps
4 жыл бұрын
Thanks for the suggestion Eubu Eubu, I'll think about it
@omkr0122
2 жыл бұрын
The quality of your work is awesome! I am sure that the hunters would love to display your skull in a very prominent place!
@EpicCardboardProps
2 жыл бұрын
loooll you made my day Omkr 😂 love that reference!
@omkr0122
2 жыл бұрын
@@EpicCardboardProps :)
@frankdavf4599
4 жыл бұрын
Wonderful work!!
@EpicCardboardProps
4 жыл бұрын
Thanks a lot!
@emilianoortiz8795
4 жыл бұрын
I really like how you can turn regular cardboard into some awesome things, you should try doing a Boba Fett/Mandalorian Helmet
@EpicCardboardProps
4 жыл бұрын
Thank you Emiliano! Actually the Mandalorian Helmet is on my to do list already, just a matter of time!
Пікірлер: 1,5 М.