Yay, finally a Silhouette tutorial. I would love to see some vinyl projects like Spring or Easter signs, etc.
@DesignBundles
Жыл бұрын
Hi Chauna! We are working on them as we speak! - Dawn
@karenreeves3958
Жыл бұрын
Finally a Silhouette tutorial. I have stopped watching your channel because all you did was Cricut tutorials. I don’t mind sharing but keep it equal. Yes I would live to see more Silhouette tutorials from you. Thanks
@DesignBundles
Жыл бұрын
Hi Karen! We are working on a whole bunch of Silhouette tutorials so stay tuned! - Dawn
@Mspuppylove212
Жыл бұрын
I have the Cameo 4 in white and I love it! I make cards, signs, banners, iron-ons, and even create and cut out images for sublimation!!! I would love a slightly more advanced tutorial on manipulating the dots when you double-click an image. I have used it but I'm short much more can be done with it then I have taught myself. Thanks so much for all your posts!!!!
@DesignBundles
Жыл бұрын
Thank you for stopping in today and we are working on more Silhouette tutorials! - Dawn
@marjoriecramer9102
Жыл бұрын
so excited to see new videos for cameo. Yes I would love to see the new feeder.
@DesignBundles
Жыл бұрын
Noted! - Agata
@surgicaltechcrafter2169
Жыл бұрын
I have had my cameo 4 with business edition for almost 3 years and I found it so frustrating and it went back in the box and I just keep using my cricut. I would love for you to do an entire series for beginners, moving toward advanced. You teach very well. Thank you.
@DesignBundles
Жыл бұрын
Thank you so much. We will try to make it happen! - Agata
@sonyawilliams5364
Жыл бұрын
@@DesignBundles do you have any videos from start without the border around the sticker
@khaleesi324
Жыл бұрын
@@sonyawilliams5364 trying to find a video with those same process
@khaleesi324
Жыл бұрын
@@DesignBundles do you think it's possible to use a silhouette mat to make it into a stencil
@thecatsdad
9 ай бұрын
Same here. I've used a Cricut Maker for ages and it's been great. I thought I'd try a Silhouette for a change, and I so regret buying it. I bought the Cameo Pro, and I'm almost ready to throw it out of the window. The blade keeps sticking, sounding like a machine gun, it makes loud grinding noises while it's stuck, the vinyl slides all over if I try matless cutting. When it does cut, the cut lines look a mess. I've tried cutting Oracal 651 on a roll, but it just bunches up inside the machine. The latest problem is with the large 24x24 inch mat. It won't load, and I get an error message saying the mat is too wide for my machine. It's set up correctly. To use the 24 inch mat, I have to set it as a 12 X 24 in the page settings. My machine also shows as a Cameo 4 in Design software, and not Pro. I'm wondering if this could be why. I've never felt as frustrated in my life. I'm ready to bin the machine and go back to my Cricut, which would be a shame, because the Cameo seems capable of doing so much more, if only it would work. I've tried looking for books on Amazon, but can't find any. Loads of videos are now on Patreon, or others charge high amounts for their videos on the likes of Teachable where just one video is $30 to learn one aspect of the machine. I'm struggling to get by as it is, the new machine was intended to help me make an income and I went into debt to buy it.
@tonyaleach4884
Жыл бұрын
I would like to see waterproof stickers also! Love this video
@DesignBundles
Жыл бұрын
Hi Tonya! We can add that to our list of tutorials for you. Which Silhouette machine do you have? - Dawn
@tonyaleach4884
Жыл бұрын
@@DesignBundles I have the cameo pro. I don’t use it much because there aren’t as many video tutorials as the Cricut. I am excited to watch Design Bundles silhouette content! Thank you!
@sharonrusso5601
Жыл бұрын
Always love Design Bundles tutorials. Thank you!
@honeybee5420
Жыл бұрын
Anything for Silhouette, yes! Thank you!!
@DesignBundles
Жыл бұрын
Sounds good, noted ! - Agata
@trishaprisbrey6043
Жыл бұрын
Anything silhouette would be awesome, I would love to see the new sticker thing you were talking about. Thank you Crystal!
@DesignBundles
Жыл бұрын
You got it, Trisha! We are always looking for new tutorial ideas 🥰 - Dawn
@mildredpepe552
Жыл бұрын
I bought myself a Silhouette Cameo 4 Plus for Christmas. The Cameo came with 2 autoblades, 3 mats and a set of tools. My machine is white. I would have loved a turquoise one, but unfortunately, I don't think it comes in any other color. I am interested in learning more about the different blades and what they are used for such as the Punch Tool and the Kraft Blade. I went ahead and upgraded to the business edition of Silhouette Studio and would be interested in learning more about it's features as well. Thank you.
@DesignBundles
Жыл бұрын
Hey Mildred! You will LOVE the Business Edition! It isn't as straight forward as Cricut Design Space but you can do so much more! We are working on more Silhouette tutorials but here is a beginner one that will help: kzitem.info/news/bejne/1oyM1YF4a2mApW0 - Dawn
@wileycovington4497
Жыл бұрын
I would have loved a turquoise color one too, but I figure I can decorate it with printable vinyl.
@barbbrown1092
Жыл бұрын
I am trying to cut stickers with holographic sheets on the front of the sticker.... No matter what settings I have used I cannot get the machine to cut all the way through the stickers so that they are completely removed from the background sheet with the off set as the cut line. I even purchased silhouette holographic sticker sheets and it doesnt even cut enough to use the sticker. I tried cutting on the magnetic sheet setting with the force set a 33 and the speed set at one and moved the blade up to number 8, even with four passes it does not cut through... do you have an suggestions?
@karenhaywood5736
Жыл бұрын
Great video! Yes yes, more Silhouette tutorials 😊
@debbhickman
Жыл бұрын
I would love any Silhouette tutorials! I have the business edition for my Cameo 3, which I've had since it first came out. There's so much more that they can do. I'd love to learn more. All I ever see anymore is cricut stuff and I do not care much at all for cricut cutters.
@DesignBundles
Жыл бұрын
Hi Debbie! We are working on more Silhouette tutorials. Is there any project type that you would like to see? - Dawn
@debbhickman
Жыл бұрын
I am starting to get into paper crafts but I'm interested in learning about whatever Silhouette can do.
@geniakimbral7465
Жыл бұрын
I’d like to see more on the Cameo sticker sheet feeder
@DesignBundles
Жыл бұрын
Noted! -Agata
@kellydoelger981
Жыл бұрын
Yes please do the punch out tutorial!! More Silhouette content!!
@DesignBundles
Жыл бұрын
Hey Kelly! What type of Silhouette projects are you working on? -Dawn
@christinakidd5282
11 ай бұрын
Yes, please show more tutorials using the Cameo 4. I am able to learn from yours better than others available on KZitem, currently. Thank you!
@riolibertymashuki1576
11 ай бұрын
Would love to see more silhouette videos
@sonyawilliams5364
Жыл бұрын
Yes everything you mentioned; I want to see
@Purebeachlove
9 ай бұрын
I love how you zoom into where to select options in silhouette studios! Thank you for detailed explanation! Just got the cameo 4 and loving it. Have the cricut explore air 2 but I’m preferring the cameo. 💗
@latasharosich905
11 ай бұрын
Incredibly helpful video! Thank you
@AlexGarcia-xi4iy
Жыл бұрын
would love to see how to print multiple papers through auto feed. you are awesome
@DesignBundles
Жыл бұрын
Hi Alex! Which printer are you using? - Dawn
@poppycitrus
Жыл бұрын
Loving the Silhouette content. Yes to everything and please keep them coming. Love your videos, really appreciate your efforts. ☺
@DesignBundles
Жыл бұрын
Thank you so much Poppy! - Agata
@cybercrafter8588
Жыл бұрын
I have the Cameo 4 and would appreciate any tutorial you do
@xclusivedzn
Жыл бұрын
I would love to see more cameo tutorials. I have the 3. Thanks for this video.
@robotpixiedesigns
9 ай бұрын
Thank you so much for this! I've been nervous to make stickers but now I see it's easier than I thought. I don't see nearly enough Silhouette tutorials so I'm glad you're making more!
@CasperNZnic
Жыл бұрын
Love the Silhouette videos!! I have the Portrait 3 but I'm happy watching you create on any machine. Looking forward to seeing more content
@DesignBundles
Жыл бұрын
Hi Nicole! Thank you for your kind words. We are working on more Silhouette tutorials so stay tuned! - Dawn
@deniellepodraza7781
Жыл бұрын
Yes I'd love to see the auto filler
@DesignBundles
Жыл бұрын
Noted! - Agata
@sherrihaller435
Жыл бұрын
Thank you for this! I love my silhouette and appreciate the tutorials! 15:52
@katelynnc86
4 ай бұрын
Do you have a tutorial on how you design the stickers? Specifically which platform you use and how you save them to the files.
@garnerlove9292
Ай бұрын
A lot of people use canva or draw their own designs with programs like Procreate or Krita.
@Truth.illustrated
5 ай бұрын
Your video was great! Ty! Will you be making a series on the new cameo 5?
@bevyjeanheyrman8537
Жыл бұрын
I have cameo4 too
@lynnenc
Жыл бұрын
I would love to see how to laminate the stickers so they are water proof.
@DesignBundles
Жыл бұрын
Hi Lynne! After you print the stickers, you can add a laminate on top BEFORE you cut! - Dawn
@lynnenc
Жыл бұрын
@@DesignBundles I've never done that before. Would you just put the laminate sheet on top of the sticker paper and cut them together?
@hrivera72rivera39
4 ай бұрын
Wish I knew about the shipping labels sooner! Great idea and price! Thank you
@BrittaSinger
7 ай бұрын
I got my Silhouette Cameo 4 in white and love it! I want to learn all the things I can do with it!
@arleneaugustahair8393
Жыл бұрын
I definitely want to see the auto feeder. I have a Cricut Maker. I just bought a Silhouette Cameo 4.
@DesignBundles
Жыл бұрын
Thank you for the feedback Arlene :) How exciting on the Cameo 4 I hope you enjoy it Happy Crafting - CrystalAnn
@arlenefigueroa6027
Жыл бұрын
I want to see more videos using Cameo. Like cutting without mat, or using the software. I think is little complicated when you want to make a SVG or trace.
@LetsChalkaboutitVanessaPrieto
11 ай бұрын
yes yes yes.. I would love Silhouette vids... Thank you .. I have the Cameo 4 in white :)
@judybarrett2697
Жыл бұрын
I’d like to see waterproof stickers.
@DesignBundles
Жыл бұрын
Hi Judy! Noted! - Agata
@jenniferblair6766
Жыл бұрын
Do you have any videos for the cameo 4 plus? I would love to see a print then cut when you need to add a cut border around a picture. Thanks! Love this video as well. ❤
@DesignBundles
Жыл бұрын
Hi Jennifer! Crystal is working on additional videos with all of the Silhouette machines. We have previous Cameo 4 videos here: www.youtube.com/@DesignBundles/search?query=cameo%204 - Dawn
@mamayanayan
Жыл бұрын
YES PLEASE to all those Silhouette tutorials you mentioned 😁
@DesignBundles
Жыл бұрын
You got it!!!! - Dawn
@DPRMIT0
4 ай бұрын
Using labels as stickers sheets oh my goodness that’s genius
@ChristyPeery
Жыл бұрын
Can you provide a link to purchase the laminate sheets you spoke about in this video? Thank you!
@DesignBundles
Жыл бұрын
Hi Christy! Hi there! The sticker laminate can be found here: teckwrapcraft.com/products/inkjet-printable-sticker-vinyl - Dawn
@Lokloi8
Ай бұрын
Thank you 🤍
@elizabetheggers8634
2 ай бұрын
Hello! Middle school art teacher here and I am researching a way for my students to turn their artworks into stickers. This video really helped me understand Silhouette, so thank you! My question is if you know of a way (or have a video) that might help if I we only need one sticker at a time - as opposed to waiting for a whole sheet. Are there any comparable machines that do one at a time? Or would we cut down the paper size? Thanks!
@nitzaivette2014
9 ай бұрын
is my first time washing a tutorial
@JoniB4
15 күн бұрын
I love this. I just can't get the red around the stickers. Not sure why so I am stuck at that point.
@maygonzalez989
Жыл бұрын
This was so helpful! I’m trying to figure out how to cut my holographic ones without it cutting through completely.🤦🏻♀️
@patdawson3555
Жыл бұрын
Love my cameo. I have a curio, would you do a tutorial with curio?
@DesignBundles
Жыл бұрын
Hi Pat! We can certainly do a tutorial with a Curio! Any project type you prefer? - Dawn
@patdawson3555
Жыл бұрын
@@DesignBundles well I haven’t done any 🙊 I bought one from a lady brand new snd it’s been seating down fur a year now. Maybe I’m interested in making your own templates ? Using DT flexible cutting boards. You cut through the shape of your project. eg. acrylic keychain. You put the acrylic in your template to then sketch on it. I hope this makes sense.
@trishmadore2104
8 ай бұрын
I think this is great but I am not fond of the white outline around the sticker. Is there any way to adjust or not have the white edge? Thank you!!
@rrmilklady
Жыл бұрын
So with the silhouette you can use more of the sticker paper than you can with Cricut print & cut?
@sarahtapia7165
Жыл бұрын
Yes, however if you go into your settings in design space and change it to beta, then you can have a larger area to have stickers and use the whole sheet. But you have to change your settings to beta
@teresacline8782
11 ай бұрын
I can't seem to find a tutorial on how to make a sticker from scratch. Using a flexi shape, filling it in with a pattern the layering it with a rose on the corner then some text. I need to learn how to do all this.
@andytwotymes
5 ай бұрын
No wayyyyy!!!!! I thought I was the only one who used shipping labels with laminate!!!
@shawuanamay3913
Жыл бұрын
Yes. Tutorials for silhouette
@CristiMac-sm3hj
4 ай бұрын
Can you tell me what you used for the iridescent overlay?
@katharinebrooks5555
Жыл бұрын
I was wanting to ask about when you convert an Epson eco tank to sublimation is there a program you need to work with it to lay the white ink down with it. I have heard that there was one but not sure.
@DesignBundles
Жыл бұрын
Hi Katharine! Which design program do you normally work in? You can use Canva, Cricut Design Space, and Silhouette studio all with your Epson! - Dawn
@ChaunaCasteel
Жыл бұрын
You would need a printer that prints white ink. None of the sublimation printers will do that. I believe the DTF printers print white ink.
@vanessaguler2299
9 ай бұрын
So I need to ALSO purchase a printer in order to make my own stickers with the cameo?
@maggiesmith604
6 ай бұрын
Brilliant xxx Thank you xxx
@wileycovington4497
Жыл бұрын
I do the same thing with holographic overlay.
@sinwarrior3538
9 ай бұрын
Does laminating your stickers save the hassle of having to wait for the ink to dry on the paper or do you still need to wait for the ink to dry ?
@michellemarikos5029
Жыл бұрын
Yes auto feeder videos, and with the barcode info please
@DesignBundles
Жыл бұрын
Noted - Agata
@mc.haulotte
Жыл бұрын
Can you leave a link for the glitter & holographic sticker paper? What setting would we use to cut through both? That's what you would do, right? I have a Cameo 4
@sweettimes359
6 ай бұрын
Do you have to have the white boarder around the image? I don’t want empty white space around my stickers
@apekepoo
Жыл бұрын
I have the Cameo 3 and for now, it gets done what I need done. I was wondering where to purchase the glitter laminate sheets? What is the name and all to look for them. Thank you 😊 Your videos are wonderful and very thorough . ❤
@VERONICA-og8vl
Жыл бұрын
I’m interested wana see how to load many sheets
@threecreations
Жыл бұрын
How do you have the images already traced out before merging?
@vidaencristo1857
10 ай бұрын
In your opinion which is better, cameo 4 or new portrait 4? I am making my final decision
@pecan4267
4 ай бұрын
Hello, first time user. Do I use the "auto blade" tool for this?
@carlottawinters6124
4 ай бұрын
The heart looks pink as a sticker but more red on the silhouette screen. Why is that?
@jaynemarklew5892
Жыл бұрын
I would like to know how to print on vellum
@DesignBundles
Жыл бұрын
You may have to check with Silhouette's support for which setting they recommend! - Dawn
@mikeledee8786
10 ай бұрын
Is there a way to make a sticker for a car that would hold up to the uv effects of the sun? Thanks
@deniellepodraza7781
Жыл бұрын
Ohhhh I didn't know there was a punch out option!
@DesignBundles
Жыл бұрын
Yes! Exciting, right! - Agata
@cameronmcleod-vk6lj
8 ай бұрын
would i be able to make these with the 1st silhouette machine?
@Listorres02
Жыл бұрын
I’m still learning my cameo 4. Do you load the printer with the sticker paper and print it out? And then put it on the cutting board ?
@angelrutan8427
6 ай бұрын
Yes. 😊
@veronicadeevers3246
Ай бұрын
How do I save the downloads I purchased?
@verenalewis4815
Жыл бұрын
I got a cameo pro 4 back in October and I still can not get it to cut completely through the material, I have tried different kinds of cardstock, perment vinyl and HTV and it still is hit or miss on weather it will cut out. Sometimes I can get one design cut out and then not touch anything and load the exact same material and it will not cut. Tutorial would be so amazing.
@DesignBundles
Жыл бұрын
Hey Verena! Have you increased the blade depth? What settings are you using? - Dawn
@verenalewis4815
Жыл бұрын
@@DesignBundles yes I have tried increasing the blade depth and also i have tried increasing the force.
@pmttels7
Жыл бұрын
Would like a tutorial on cutting fabric
@DesignBundles
Жыл бұрын
Noted! - Agata
@vaunyedrake55
4 ай бұрын
Are these sticker designs on silhouette?
@theecomninja3434
Жыл бұрын
What tool did you used to make those amazing high quality stickers before importing to Silhouette studio? Did you use Photoshop, canva or other?
@myisheaharris5231
5 күн бұрын
I did step for step and it still didn’t work 🤦🏽♀️
@wileycovington4497
Жыл бұрын
I am so happy there are red lines to show the offset. It's hard to do adjustments on the Cricut mat because if the offset is white it can't be seen.
@DesignBundles
Жыл бұрын
Yes! We love Silhouette Studio for so many reasons. - Dawn
@wileycovington4497
Жыл бұрын
@Design Bundles I'm finding many reasons to be happy that I've replaced my Cricut with my Cameo 4.
@arlenefigueroa6027
Жыл бұрын
Hi. Can we use the same cricut Mat for the Cameo 4?
@lindaaustin-morin7781
Жыл бұрын
Does this work with Cameo 3?
@traceybolton3446
Жыл бұрын
Hi is it possible on how to do the same printing but with the pro as I can't seem to get it to work properly much apreciated. More silhouette content would be great as all you seem to see at the moment is Circuit.
@DesignBundles
Жыл бұрын
Hi Tracey! No problem, we are working on more Silhouette tutorials as we speak! - Dawn
@traceybolton3446
Жыл бұрын
@@DesignBundles thank you very much.
@steveferguson1232
Жыл бұрын
Do you prefer the silhouette over the cricut maker. I’ve been think of the silhouette for my wife because of 24” size
@sarahtapia7165
Жыл бұрын
I prefer the cricut over the silhouette. Design space is a lot more user friendly than silhouette studio for sure. But If I want to print a larger image for sublimation I go into silhouette studio which is free and you do not need to own a silhouette machine to use the basic studio.
@Caffeinated.and.Crafting
Жыл бұрын
SILHOUETTE all the way!! I have 4 machines, my daughter has 2...love love!!
@sarahtapia7165
Жыл бұрын
@@Caffeinated.and.Crafting lol . I think it’s totally user preference. I have 5 cricut machines. You sound just as die hard as I do about crafting! Love it 😊
@traceybolton3446
Жыл бұрын
Silhouette all the way the software is easy to use, I have the 24" machine an old portrait and a curio been using silhouette for over 10 years. Ccricut uses cloud base software so if it goes down you can't use your machine where as Silhouette software is stored on your pc or laptop with a 10gig cloud back up.
@DesignBundles
Жыл бұрын
Hey Steve! That is so nice of you to think of getting your wife a new machine. If she's looking to do larger projects, Silhouette is the way to go. Cricut is more user friendly however. Is she a new crafter? - Dawn
@anubin7625
Жыл бұрын
If the red border offset isn't on your images, how do you get it to border the outline of the image? Mine comes in as a square or rectangle around the image.
@DesignBundles
Жыл бұрын
Hi there! Is the line color set to red? Sometimes I change my to transparent and forget to change it back! - Dawn
@anubin7625
Жыл бұрын
@Design Bundles No, I finally figured it out. I had to do an image trace to get the base image. Then do the offset for the border. Thank you!
@hunterhatch122
Жыл бұрын
I'D LOVE TO SEE THAT LAMIATED THING YOU WERE TALKING ABOUT IN THE VIDEO
@katiewiserkrizek8055
Жыл бұрын
My problem with the print and cut is that the image always prints out much lighter than the image shows on the screen. Do you have a tutorial on how to fix that?
@DesignBundles
Жыл бұрын
What type of image do you mean? Have you been printing stickers, sublimation designs or something else? - Agata
@katiewiserkrizek8055
Жыл бұрын
@@DesignBundles Well, I've tried doing stickers as well as waterslide. And they have been things like flower images I've purchased or just photos that people want put on tumblers. Somehow they never print out as the color I see on my monitor. They are always more faded looking than what is on my screen. It could be my printer of course. But, I have even tested it with photo paper and those ended up better looking than the sticker paper.
@bridgetmcmahon9991
Жыл бұрын
I have found this problem too especially as I'm using a laser printer, I find that double checking from the source file that each colour has come onto silhouette Studio with the same CMYK colour values and adjusting them if needed fixes this issue. Especially find that Adobe Illustrator files come in with the colours all changed.
@katiewiserkrizek8055
Жыл бұрын
@@bridgetmcmahon9991 thank you!!
@reneenelson7089
Жыл бұрын
What inkjet printer do you have and do you have to have a inkjet printer to make stickers
@DesignBundles
Жыл бұрын
Yes you need an inkjet to make stickers. Any will do really - Agata
Пікірлер: 157