It worked! I had to come back and say thank you. I had colors blending into other colors and I am assuming it was because of moisture. So I pressed each blank mouse pad three times before pressing with the design and they look great. Thank you!!
@AngieHolden
5 ай бұрын
Yep! Moisture is tough with these!
@gailbynum3465
24 күн бұрын
Thank you for this tutorial!
@AngieHolden
24 күн бұрын
Glad it was helpful!
@helensonnichsen1173
10 ай бұрын
Thanks, I had a fade spot in middle not knowing about the moisture trick. Love watching you, you explain so will.❤
@AngieHolden
10 ай бұрын
Happy to help!
@bonniegross3674
10 ай бұрын
Angie, You are so smart. You help take the guess work out of these projects. Keep up the good work. I enjoy your tutorials,
@AngieHolden
10 ай бұрын
Glad you like them!
@carol-annridler3560
10 ай бұрын
Good tip for the moisture in neoprene. Thank you .
@AngieHolden
10 ай бұрын
You bet!
@LisaVornhagen
10 ай бұрын
Thank you so much for all of your helpful information!
@AngieHolden
10 ай бұрын
Glad it was helpful!
@MelissaH05
10 ай бұрын
Perfect timing for this video! I love it
@AngieHolden
10 ай бұрын
Enjoy!
@monabryant9984
10 ай бұрын
I love the tip on pre-heating the mouse pads. I had trouble with sublimating mouse pads - now i know what will fix it. Where did you get your protective paper cutter. I love that. Thank you - I always enjoy every video I watch of yours.
First thank you for the tutorial, about to try it now. Second your craft station is AMAZING!!! I'll admit I'm a bit jealous. Mind if I ask if it's one of them Craft Dream Box Storage Cabinets?
@AngieHolden
Ай бұрын
It is! You can see more here: kzitem.info/news/bejne/o2t8q6Cip4Scoo4
@mygremmy
5 ай бұрын
fixing to try my first mouse pad with the black backing
@AngieHolden
5 ай бұрын
Good luck!
@terrybarnhill8451
10 ай бұрын
I like the black traditional mouse pad. To me the colors are more intense on that one. The tan backed mouse pad looks a little washed out.
@AngieHolden
10 ай бұрын
Definitely looks different to different people! Hopefully this helps you decide!
@michelledepasquale9272
10 ай бұрын
I thought the same thing! I thought it was me! :)
@robinmoreno1066
10 ай бұрын
Great information Angie! So helpful!
@AngieHolden
10 ай бұрын
Glad it was helpful!
@lisapandolfo1141
7 ай бұрын
What is the media type I should be selecting for printing on sublimation paper for the mousepad? I love the tip on putting the mousepad on the pattern instead of the other way around. Thanks.
@AngieHolden
7 ай бұрын
Seriously depends on the printer. Whatever you would use for fabric though should work well.
@deannamaldonado8980
8 ай бұрын
Thank you 😊
@CamilleTheCancer
10 ай бұрын
Thank you!😊
@AngieHolden
10 ай бұрын
You're welcome 😊
@cindigiannantoni6255
10 ай бұрын
Thank you so much!
@AngieHolden
10 ай бұрын
You're welcome!
@annclair3908
6 ай бұрын
Hello Angie, my questions are, where did you get your tape and dispenser from as well as the cutter? it maybe in the comments but I can't find it...Thank you
@AngieHolden
6 ай бұрын
I linked the tape dispenser in the description below this video. The protective paper dispenser I talked about here: kzitem.info/news/bejne/sIxvtqeAiZylmYY
@parisharrison6639
10 ай бұрын
Great video
@AngieHolden
10 ай бұрын
Glad you enjoyed it!
@terrybarnhill8451
10 ай бұрын
Where do you find the parchment or butcher dispenser?
@AngieHolden
10 ай бұрын
Try this: kzitem.info/news/bejne/sIxvtqeAiZylmYY
@user-ww6ef3ns8f
6 ай бұрын
Do you think sublimating using sublimation oven would transfer the image on to a mousepad? I make tumblers but want to expand substrates without having to purchase too much equipment straight out. TY
@AngieHolden
6 ай бұрын
I don't think that would work as you need pressure as well.
@johnfigueroa7569
10 ай бұрын
Great video Thank You! What should I set my pressure to? I have the Amazon lees expensive version with a black background
@AngieHolden
10 ай бұрын
I would say medium to light.
@johnfigueroa7569
9 ай бұрын
Thank you maybe thats why a few came out to dark. Thanks a bunch!!!@@AngieHolden
@janetbuchanan8149
4 ай бұрын
Hi Angie trying to make mouse pad and was looking for the spray cannot find it anywhere the link you posted is not working is there another spray I cn use.....thanks in advance.....Janet
@AngieHolden
4 ай бұрын
The company went out of business that had the spray I like. I will be looking for another version!
@fieldai
4 ай бұрын
Thanks for this. I always watch your videos, often multiple times, because they are so helpful. I am getting a faded-out swath in the middle of the mousepads I've been trying to sublimate. I used the A-Sub brand from Amazon. I pre-heated them one to three times. After watching this video, I experimented with really trying to get the moisture out, but even after 5x pre-heating, steam was still coming out. I cooled off the blank and then sublimated with my handheld flat (easy press style) press, 385 @50 sec. The neoprene backing stuck to the blowout sheet and started to peel and tear away from the top. The majority of the black rubber remained on the blank, but is very sticky. Should I try another brand of mousepad blanks? Or is there something else I can try? TIA
@AngieHolden
4 ай бұрын
What type of mat are you using under them? If you are using the EasyPress mat, that may be the issue. It doesn't sound like they handle heat very well however. But if you still have more you can try just preheating a few times and using a firmer mat.
@fieldai
4 ай бұрын
@@AngieHolden Thanks, it makes sense that it could be my EasyPress mat. I can try a different, firmer one, but am not sure what to search for. Are there any you could recommend?
@AngieHolden
4 ай бұрын
Artesprix has a heat resistant mat that I use because it is firm.
@fieldai
4 ай бұрын
@@AngieHolden Thanks for the tip about Artesprix. I will check it out. In the meantime, in searching at home for something to use as a firmer pad, I found a piece of unfinished plywood to replace my EasyPress mat. I also realized I was using parchment paper instead of butcher paper. I made these two changes and now my mousepads look great! Thanks so much.
@trinaceniceros8027
4 ай бұрын
So what is the temp and temperature for a mouse pad
@AngieHolden
3 ай бұрын
Depends on the brand of mouse pad that you are pressing. Always look where you purchase your blanks first.
@arhodes
5 ай бұрын
Do you have a different link for the tan back mouse pads? The links are not working. :D
@AngieHolden
4 ай бұрын
Sorry I do not. Company is going out of business so we are looking for other sources.
@judijohnson5374
10 ай бұрын
I made some but no one uses mouse pads hardly. Can they be used for holding hot pans?
No matter how many times i pre heated, I’m still getting white spot in the middle :( Any further advice ???
@AngieHolden
7 ай бұрын
Maybe try increasing your pressure? Or using a firmer mat underneath? Sounds like uneven heat at that point.
@christinagoggin9531
10 ай бұрын
Can I use the sublimation mouse pad for Cricut Infusable ink?
@AngieHolden
10 ай бұрын
Yes you can!
@amandahawkins87
7 ай бұрын
Hey Angie, quick question... So I have an Epson f170 and I noticed when I print images I understand the image is supposed to be lighter when it's printed and then when you press it it gets more vibrant and everything but I notice mine definitely looks a lot lighter and more subdued than yours do, am I doing something wrong or is there something I can do to get a better more vibrant image? It seems like when I press the image the colors are beautiful but I noticed when I was buying images from vinyl fun the vinyl and sublimation store in my area, the images definitely look a little bit more vibrant from that store then on my printer. I followed your setup video when I got my f170 so I went over to the Epson site and downloaded their drivers and everything like I was supposed to and when I print my images I usually do everything through canva and print through Gimp because I cannot figure out how to work gimp it is so confusing but when I go to my printer setup and everything I always choose the right paper and the right orientation and everything and then since I'm printing through gimp I go on and I choose custom ICM profile instead of automatic for color and I always do high-quality instead of standard quality and I don't do bi-directional printing either so if there's something else I can do to make the colors pop a little bit more can you let me know? thank you so much honey I really appreciate you and all that you do for us in the crafting world! You are such a gem❤❤❤
@AngieHolden
7 ай бұрын
Try this: kzitem.info/news/bejne/yJV_0mRro52rm6Q
@AngieHolden
7 ай бұрын
Try this: kzitem.info/news/bejne/yJV_0mRro52rm6Q
@parisharrison6639
10 ай бұрын
do you peel hot or cool?
@tamikadavis5113
10 ай бұрын
I wish someone would tell me why they say cold or hot peel. I have no patience. I hot peel everything. SMH.
@AngieHolden
10 ай бұрын
I almost always peel hot as I have no patience. You can do either I think.
@deenawillis1597
10 ай бұрын
What printer would you recommend for 13 x 19 sublimation field
@AngieHolden
10 ай бұрын
Sg1000.
@deenawillis1597
10 ай бұрын
That’s out of my price range right now. What do you think about the Epson ET8550?
@kathymcdougall2792
10 ай бұрын
After I sublimated, the smell of the rubber back is horrible. I am using the pads you recommended, I did 385 for 45 seconds. 3 days later the smell is still awful. Do you have a hack for this
@AngieHolden
10 ай бұрын
Seriously sitting here using one of the ones I made in this video with zero issues. Maybe your heat press runs hotter?
Пікірлер: 74