I heated a small strip and bent it, then cut it to the shape I want, then reheat and slapped mine on it. It was like butter. Looks good bro
@kayakangler
3 жыл бұрын
awesome, glad it worked for ya!
@RetroGK
3 жыл бұрын
Well, I now know what I'll be doing this weekend. Great idea and video...thanks mate.
@sunnybhai1904
3 жыл бұрын
Just made a couple perfect keel guards for my Hobie compasses! Thanks for letting everyone in on this tip! I used .08 size in grey - there are so many colors available! Being thicker I had to use a rotary tool to cut it into shape and the dremel sanding bit to finish it. Super strong and much better than pvc in terms of durability and scratch resistance. Also doesn’t have those burn marks and can take a lot of heat without damaging it
@jeffdaiber4000
2 жыл бұрын
Our LL: 1. We used a Dremel type tool to bevel the ages so there would be less drag, less chance of something like grass catching the edges, 2. We found Kydex in a black carbon fiber pattern that made the aesthetics more palatable on a black carbon fiber canoe-FYI, 3. Our application was a carbon/Kevlar (aramid) canoe so we decided to use 2 sided tape, however the tape is too thick; I wish we could find something thinner and water proof. We did not want to use glue due to our concern that we would never be able to replace it given the carbon/Kevlar construction of the canoe. I sure appreciate the Alan's ingenuity!
@richsilvasatx
2 жыл бұрын
Good tip on the tape v glue.
@LCon30
4 жыл бұрын
If only there was some way to have gravity assist you... Haha I kid, great video... I already hit up Amazon for a 4 pack.
@PacificCoastHunterz
3 жыл бұрын
Brilliant. I've been looking for a solution like this. Thanks for the tutorial.
@Musicalpa
2 жыл бұрын
After a couple decades of wanting to have a fishing kayak, the day has finally come and I want to protect "my precious" as much as possible, lol. However, how much is really needed and where, and how much would make me look like a lunatic, lol? I could cover the entire bottom of the boat with kydex for the ultimate protection, lol. Do you think you can make a video sharing your thoughts on how much keel/hull protection is really needed, and if there are other areas of the hull which could use a small panel of kydex protection too?
@codyrugemer6529
5 жыл бұрын
Think im gonna make one for my kayak now. Thank you for the step by step. Tight lines
@kayakangler
5 жыл бұрын
You're welcome! If you have any issues, send a message and I'll help if needed. Enjoy your new hull guard :-)
@nicholasmaiers4221
2 жыл бұрын
Thanks from another Marylander kayaker
@richsilvasatx
2 жыл бұрын
Just a quick question: does the kydex side to kayak matter? Or is either side OK? I've got a scroller saw I plan to use to cut the Kydex, with a little bevel edge.
@richsilvasatx
2 жыл бұрын
Oops. Just read the same q and got the reply. Thanks.
@thiodorchalkias8906
Жыл бұрын
Nice video thanks for sharing!!!! Do you even think to do the same with a metal sheet (aluminum or stainless steel)???? This could stay there FOR EVER!!! No very thick lets say 0.5 - 1 mm no more .... Have good time every time!!! Best regards from Hellas (Greece)
@stephensodergren1825
5 жыл бұрын
Just checked Grainger sells the sheets for $ 4.43 ,, 12" X 12" going to pick up tomorrow. Thanks for the video
@MrCarmelo1959
3 жыл бұрын
Hey Stephen I’m having trouble locating this pack tried all the numbers on that pack he shows but still no lock can you share how you found it?? Thanks
@OutdoorAdventures808
3 жыл бұрын
What adhesive did you use to attach the guard to the kayak?
@kayakangler
3 жыл бұрын
Marine Goop
@morganswisher1937
5 жыл бұрын
I like this idea. It appears you have used this for a while. How often do you need to replace? How hard are you on it? Dragging down Concrete ramps for the last 4 feet? How hard is the marine goop to get off when you need to replace? Thanks got the great step by step.
@kayakangler
4 жыл бұрын
I would never drag my kayaks that far. This is for landing on boat ramps and the incidental dragging that occurs. The marine goop is tenacious but can be sheared off with a putty knife.
@MarkoAbo
3 жыл бұрын
I'd be afraid to heat that up against my HDPE Outback. You could melt the surface of the kayak no?
@sonofbryify
2 жыл бұрын
1 of few videos that gave me insight into how much you can cook kydex. Other ideas are to be kept in mind if it fits your situation
@jerry-381
4 жыл бұрын
Nice work. It definitely looks better than the PVC versions for sure. It's just no where close to being as effective. 60 mil is 1/16" thick whereas schedule 40 PVC is about 1/4" thick.
@scottgorman7166
4 жыл бұрын
Ok all you guys are hearing these up on a rotomold boat. What about a Eddyline boat which is a PVC vacuum formed hull. You might melt the hull with a heat gum so close, any thoughts.
@Walt1119
4 жыл бұрын
Thanks for the video!!!, your job does look professional. I just formed one from the thin wall pvc pipe, not near that easy to work with, still turned out pretty good, if I do another I will use the Kydex! Sure would have been easier though with your boat upside down on sawhorses... Thanks again!! W
@TomyTekOutdoors
5 жыл бұрын
I've been searching for something like this for a while. This looks like a really nice solution. How long have you been using it on your Outback? I'm curious how much use you can get out of it. Did you have to rough up the area before you glued it down with marine goop?
@kayakangler
4 жыл бұрын
It'll last a long time, maybe the life of the yak. You don't need to rough up the area, just clean it.
@Musicalpa
2 жыл бұрын
I just received my .093 kydex, and have been considering using marine goop to adhere it to my polyethylene Lure 11.5 V2 kayak. Did I hear you correctly that you use marine Goop, and how well does it hold it onto the kayak? Any issues to be aware of?
@duck7927
2 жыл бұрын
I have the 13.5 lure did you get it to adhere secured properly?
@Musicalpa
2 жыл бұрын
@@duck7927 Yes. I used "Amazing Goop, "Marine"" and it's working without any issues.
@duck7927
2 жыл бұрын
@@Musicalpa thank you for getting back so fast. I just ordered a bottle of the stuff.
@Musicalpa
2 жыл бұрын
@@duck7927 Bottle? It should be in a tube. Here is a link to what I used, however, I now see there is a 10oz tube to use in a caulk gun that I wish I used, as the tube is challenging to work with and a caulk gun would be much easier. Amazing GOOP 170011 Marine Adhesive, 3.7 Fluid Ounces a.co/d/dsKo78h
@samuelstrickland3678
3 жыл бұрын
What do you use to hold the keel guard to the kayak after it is molded
@kayakangler
3 жыл бұрын
Marine Goop
@samuelstrickland3678
3 жыл бұрын
@@kayakangler Thank!
@jimdes1792
3 жыл бұрын
What do you use to glue the guard on to the canoe ?
@kayakangler
3 жыл бұрын
Marine Goop
@martinsfishing2285
Жыл бұрын
how many millimeters is this kydex sheet?
@dalebeasley3113
3 ай бұрын
How does it affect tracking and glide
@shihanjulio
3 жыл бұрын
Does it matter as to which side of the Kydex to use, or is it the same texture on both sides??? Great video.
@kayakangler
3 жыл бұрын
One side is a little different than the other, but I don't think it matters. The marine goop will adhere well to either side. Thanks!
@philipdean5950
4 жыл бұрын
Thank you for your video. I just ordered these sheets and wondering if you have a follow up if theres any signs of cracking or if its holding up well. Tight lines
@kayakangler
4 жыл бұрын
Just scuffs as one would expect. No signs of cracking, peeling or coming off. It's been really good.
@mooseadolfson8002
2 жыл бұрын
Where can I get a template for my kayak Old town sportsman 120 PDL
@phillipiacobacci1369
4 жыл бұрын
Well done, looks great, clean and easy install
@Musicalpa
2 жыл бұрын
What width did you cut the kydex for your bow keel guard?
@kayakangler
2 жыл бұрын
3-4" will do Cut out a paper version first to verify the fit.
@dksaus007
3 жыл бұрын
What thickness kydex? I have sheet of .125", will that work?
@kayakangler
3 жыл бұрын
I used half that thickness. I'm sure that would work, but may be just a little harder to work with.
@caryverhalen
4 жыл бұрын
Have u replaced it yet? Or is it working still? Great tutorial thanks
@kayakangler
4 жыл бұрын
Same one!
@mccray44
4 жыл бұрын
Great idea Alan. I’ve been looking at options for a keel guard. Did you secure it with double sided tape?
@kayakangler
4 жыл бұрын
I ended up using Marine Goop, which worked really well and is what I recommend.
@mccray44
4 жыл бұрын
Gotcha. How long before you think you need to replace it?
@kayakangler
4 жыл бұрын
@@mccray44 not sure, but I'd measure it in years. Of course it depends on how rough you are with it.
@mccray44
4 жыл бұрын
Good deal. Thanks for responding and see you on the water!
@czwest7845
4 жыл бұрын
Alan Battista if keel guard Has’s to be replaced how hard would it be to get marine goop off?
@mikeburchett8650
4 жыл бұрын
What power heat gun do you use? What temperature setting?
@gameopsdk
5 жыл бұрын
Thinking about doing this.... After looking around online though was wondering if there's a reason why you chose kydek V? Wouldn't kydek T or kydek 100 be better? Or maybe even boltaron?
@philipdean5950
4 жыл бұрын
Just wondering if you found out which kydex sheet was better
@gameopsdk
4 жыл бұрын
@@philipdean5950 from looking online I would choose either kydek T or the boltaron, preferably boltaron. Just from looking on holster forums boltaron is said to be more scratch resistant over time compared to kydek T. I also came across a chart on Google with all the different types of kydek. I'd love to get my hands on kydek 100 but it's expensive and I can only find it 4ft by 8ft sheets online. It's pretty much the stuff hospitals make their room signs out of... I ended up getting the same kydek v that the guy in the video got only I got .08 instead of .06, idk if tin snips with cut it but I have a scoll saw so I should be good.
@gameopsdk
4 жыл бұрын
I haven't installed it yet though or even cut it out, been working 6 days a week since summer...
@stevebecker2501
3 жыл бұрын
What is the width at the widest part of the keel guard ? Looks like 3-4 inches. Thanks
@kayakangler
3 жыл бұрын
I get 3 per 12" sheet, so 4" wide.
@stevebecker2501
3 жыл бұрын
Thank you sir ! I'm going to make one for my Old Town.
@hobiebassassassin9136
4 жыл бұрын
Great Idea! Would recommend you install some LED lights and work with your kayak upside down.... thx
@kayakangler
4 жыл бұрын
I've got too much stuff mounted to the top of this one that I didn't want to take it all off for the few minutes it'd take to work on the hoist.
@fishingyaks1221
5 жыл бұрын
What are you using to attach the keel guard to the kayak?
@kayakangler
5 жыл бұрын
Marine Goop. Put enough on so it starts to squeeze out around the perimeter of the guard. Wipe it with a paper towel to create a nice fillet around the edge. Tape it in place for a day with gorilla tape until the goop cures.
@czwest7845
4 жыл бұрын
@@kayakangler If you have to replace keel Guard again how hard is it to remove marine Goop?
@tombeckett4340
4 жыл бұрын
I’m just going to use my Grand kids magic carpets that they don’t use anymore. I’m sure they will work fine. Cheers 🇨🇦👍
@davidlewis9572
Жыл бұрын
Nice job , cutting would be easier on bandsaw or scroll saw . Upside down on saw horses too . Great info thanks
@tonystanley7956
4 жыл бұрын
ALAN. Excellent Video. I will however have to try and find a supplier in Melbourne Australia. I have a Point 65 Modular Kayak ( Tandem ) but I would run this material along its length. Any idea how much a larger sheet would cost. Also I found it painful watching you work on your Kayak. ( due to a frozen shoulder , ). Not easier having the Kayak upside ..? A great Video thanks
@alanbattista218
4 жыл бұрын
Hey Tony, yes it would be way easier if you could turn your kayak up side down. This particular model is a Solo Skiff, which is a bit heavy, but more so, I have so much stuff mounted to the top of the deck that it would have taken me longer to undo all of it than to work on it on the hoist :-) As far as a large sheet, I'm sure it's made, but I've never seen it. That would be pretty nice if you can come across one! Let me know if you do, thanks!
@KennyFishbone
3 жыл бұрын
Very good tutorial. Might be baby steps to some, but I've never done complex forming so it helped me! Its NOT 60MM THICK. Its .06. Might invest in actual video lighting.
@kayakangler
3 жыл бұрын
0.060" is commonly pronounced "sixty mil," which does not infer MM. You could also say sixty "thou" or thousandths. Both are common vernacular, but I can see where it can be slightly confusing.
@KennyFishbone
3 жыл бұрын
My mistake, thought you said mm
@jelly_fishing
4 жыл бұрын
Nice video ?how has it worked out ?
@kayakangler
4 жыл бұрын
One year later still awesome.
@2xtremefishing
4 жыл бұрын
How's the durability been now that it's been 6 months,
@kayakangler
4 жыл бұрын
It's been perfect. It hasn't worn through, or even close. I think I'll get quite a few years out of it.
@bennyhill3642
2 жыл бұрын
Good job Good video to the point!
@MohamedMoussagmail
4 жыл бұрын
Great video, what Kydex thickness are you using here?
@kayakangler
4 жыл бұрын
Thanks! It's the .060" thick. Check out the 2:40 mark on the video and it shows the exact part number if you need it.
@jamesmathes2665
3 жыл бұрын
Where did buy the kydex
@kayakangler
3 жыл бұрын
Amazon
@carlsavoy3984
4 жыл бұрын
What do you use to hold it to canoe???
@kayakangler
4 жыл бұрын
Marine Goop works very well.
@fernandoamparano7984
3 жыл бұрын
Where did you get the template
@kayakangler
3 жыл бұрын
It's my own design. I saw a use for this material in the kayak world and figured I'd put it out there to help the next yakker put on a professional product. It's not too hard, just a 12" x 4" rectangle with a relief at the curve. You can customize for any yak or other application needing a rub guard.
@MarkoAbo
3 жыл бұрын
How do you attach it when finished?
@kayakangler
3 жыл бұрын
Marine Goop worked very well for me.
@MrCarmelo1959
3 жыл бұрын
Yea thanks nice job but no link provided where to buy that sheet. 👎 thanks anyways now I’ll do a research on where to get it. And at the end when you’re showing the guard your spot light just flooded out the view. Again nice job
@seamushyland8199
4 жыл бұрын
Seems like it would work better in the water than a pvc one.
@tombeckett4340
4 жыл бұрын
Thanks 🇨🇦👍
@haroldfrancisco2147
6 ай бұрын
Why don’t put your kayak opposite, instead of of looking up, much better looking down it’s bad for your neck
@frankjoseph36
3 жыл бұрын
paper doll??? that's a mini paddle
@Entreprenorris
2 жыл бұрын
It’s a good idea of course but why in the world would you want to work upside down man. Flipping that boat over and let gravity work would be like so much better.
@kk5fe
Жыл бұрын
Why are you working against gravity? Working upside down had to be frustrating. Take it down and work flat. Good job other then that.
@thiodorchalkias8906
Жыл бұрын
The position of the kayak is totally rong....
@freddewfishing7611
3 жыл бұрын
Best keel guard and they last forever
@Baz7575
4 жыл бұрын
half a vid ................ sticking it ???????????
@kayakangler
4 жыл бұрын
marine goop
@kayakangler
4 жыл бұрын
Put enough on so it starts to squeeze out around the perimeter of the guard. Wipe it with a paper towel to create a nice fillet around the edge. Tape it in place for a day with gorilla tape until the goop cures.
@niknikloves08
4 жыл бұрын
Too much light
@bossbear7187
Жыл бұрын
PVC is waaaaay better than Kydex
@bossbear7187
Жыл бұрын
Heat it, form it, adhere it...just like you do with Kydex.
@bossbear7187
Жыл бұрын
cut a 2" piece the long way. It'll give you a 4" keel guard and cut the pipe at whatever length you choose.
@bossbear7187
Жыл бұрын
Not to mention it may cost you nothing since you probably have some laying around. If not, spend a whole 5 bucks somewhere.
@bossbear7187
Жыл бұрын
...and if you dont want a white keel guard....paint it.
Пікірлер: 120