Wow thanks! Honour from a fellow subscriber of your channel. All the best
@JDProject
5 жыл бұрын
@@SidewaysKing75 thank you, and you have a great channel too my friend, all the best videos keep it up 😊👍
@taryhofigurka2886
3 жыл бұрын
Oooh Jakarta Diecast here :)
@riokrstn
3 жыл бұрын
omg
@arandomcustomizer9620
3 жыл бұрын
Jd ?? What r u doing here
@barpfoto
5 жыл бұрын
I like this. A good overall presentation. Somebody may have already pointed this out, but microset is not a setting solution. It’s basically just vinegar and water and it reduces surface tension. If you really want the decals to melt into the details, that’s microsol.
@SidewaysKing75
5 жыл бұрын
Hi Will Thank you. Yes someone else has pointed this out. However I have been using this for years for this very purpose. As it states on the bottle it is a setting solution and it does soften the decals melting exactly how I want it to. I have used Microsol and it does basically the same thing, it does have the edge I agree on complex surfaces and angles but I certainly couldn't see any difference for the 'printed on' look, that is at least on the model surfaces I use anyway. Thanks for mentioning this alternative for others to use. All the best
@hpolpolsixe3670
3 жыл бұрын
I’ve had good success printing at 1200 dpi onto the clear base and spraying with acrylic clear, and finishing with pledge clear acrylic floor polish.
@BOABModels
3 жыл бұрын
A really good tutorial here. I've made decals a couple of times and had mixed success - I'll use some of your tips!
@LittlePixelTM
5 жыл бұрын
Such a pleasure to see your Illustrator skills on display - I've been using it myself for 20+ years and it's great to see you pulling in vector elements from sites like Brands of the World and making these super-pristine decals. Kudos!
@GTLandser
4 жыл бұрын
I am not a graphic design person, but what really made your video stand head and shoulders above the others was your mention of: 1) *why* Illustrator and vector graphics is best, 2) what a couple print settings usually do, and 3) explaining why microset improves the look of the finished result. Also, your video editing was excellent. So many terrible, shaky videos out there, and thankfully yours was not among them!
@SidewaysKing75
4 жыл бұрын
Thank you very much for watching and taking the time to respond, I appreciate it 👍🏻
@karimhuerta597
Жыл бұрын
Great video, two things that I can share from my experience: 1: I design my decals in a workspace of about 4 times bigger than the decal blank sheet, this will allow you to have 4 times more details and when you are ready to print the printer will automatically resize but it will keep really good detail 2: I prefer to seal the decals with flat clear, somehow the decal looks better and when you apply clear coat to the model they will still be shine
@speedy7892
5 жыл бұрын
You should try to make the M3 GTR from Need For Speed. The Hot Wheels M3 GT2 is a close start
@SidewaysKing75
5 жыл бұрын
Thanks Speedy I'll look into that one.... All the best :)
@erika_itsumi5141
4 жыл бұрын
funny how you bring up most wanted, Im in the process of making a Rockport PD Crown Vic matchbox
@zlin415
3 жыл бұрын
Hey, nice that you made a tutorial in how to make decals. I want to use my own decals for lego figures but I think it is the same proces to make decals for them as you showed. (When my english is not that good I am sorry, i am from germany)
@SidewaysKing75
2 жыл бұрын
Yes certainly my friend this process will work for any model, miniature, toy 🚗😁👍🏻
@edition_sixscalediecastmod6084
5 жыл бұрын
I use nearly exactly the same equipment... same paper, top coat and use cartridge refills.. only difference is my end results are always poo :( Great video again.
@SidewaysKing75
5 жыл бұрын
Cool my friend.... I'm sure your results are mint. As long as you enjoy the ride that's what counts too. Thanks for the comment:)
@hobbyspotnz2833
4 жыл бұрын
In your illustrator settings when you export do you do it as Jpeg or Png? Does it make a difference? Also what is the paper type you ask for? Just ask for Decal paper clear?
@SidewaysKing75
4 жыл бұрын
Hi there, I print direct from Illustrator. Exporting them to JPEG or PNG immediately gives them less clarity in print. If you really have to due to adding more elemtns in Photoshop etc., then JPEG would be better but it will have a solid background, usually the canvas you've just designed on where as a PNG gives a transparent background and knocks out the canvas. Hope this helps.
@mikehinoalco
3 жыл бұрын
Damn!! Not so welthy to reach those materials!!
@outboardfixer
2 жыл бұрын
This would be great.....all you need is a couple of years of graphic design under you belt ...otherwise you are lost in the first minute....
@Oneklickmedia
2 жыл бұрын
Honestly, with just tracing another image into vector is fairly easy. A quick tutorial and repeat exercise lessons on how to use pen tool with any basic editing software is all you need. I would say no more than a few weeks of trial and errors. Also some of the new software even vectorize a clean image for you. Probably the hardest part for most is measurements of the car/design and making it print exactly to size. That will take some precise tweeking with millimeters.
@georgesimmons5751
3 жыл бұрын
I used the Laser Waterslide paper from MrDecalPaper and found lacquer painting was still required to help the colour adhesion onto the vinyl. I have just switched to the Sunnyscopa brand laser paper and it seems to be much more durable. I guess most people are using Inkjet rather than Laser, but some of you may find this useful!
@SambosStopMos
5 жыл бұрын
Great useful video, I’ve been watching your videos in order since I discovered the channel, but watch this one as soon as I saw it! I Enjoy all of them!
@SidewaysKing75
5 жыл бұрын
Thank you so much its appreciated :)
@keithaskey1783
5 жыл бұрын
Whilst I don’t make model cars, I’m a traineac I found this perfect for making decals for trains and station signs. Easy to to follow and well explained, looking forward to more. Brilliant work
@SidewaysKing75
5 жыл бұрын
Thank you very much Keith. Glad I could help. Best wishes 👍🏻
@woodandwheelz
5 жыл бұрын
You can also scan the car on your scanner at 100% then you can open up the image and then size the decals right on the actual car. Before my external drive crashed I had over 300 Hot Wheels and Matchbox scans. I need to scan them all again.
@ethansmith715
4 жыл бұрын
Im confused about laser vs inkjet when it comes to decal printing. Some say laser is better other say inkjet is better. For me I care for the color quality of the decal will ink based be better in that case?
@SidewaysKing75
4 жыл бұрын
Hi Ethan, for clarity and precision the Laser will always win.... 👍🏻
@penjjd_0459
4 жыл бұрын
Can you do please make a video tutorial on making tailight and headlight decals?
@kristianreader4812
5 жыл бұрын
OMG that was good can't stop looking at it VERY CLEVER MAN 🤓 plz keep them coming
@SidewaysKing75
5 жыл бұрын
Thank you Kristian :)
@bluef1sh926
5 жыл бұрын
No way to make white text decals on dark painted model :/ would be useful in railway models
@SidewaysKing75
5 жыл бұрын
Not easily sadly! There are I believe white printers which are hellishly expensive OR print on white and wrap the model entirely with the decal or match the colour you are doing to the one you've printed and blend it in. It can be done with a bit of patience but hassle either way I'm afraid :(
@lx10
5 жыл бұрын
Is that a Porsche at the beginning of the vídeo? Are you working on a Dakar 959? 😲
@SidewaysKing75
5 жыл бұрын
It is a Porsche yes but not the 959..... Its one I was polishing up and was going to turn into a mini clock actually. The Dakar 959 is still coming though :)
@lx10
5 жыл бұрын
@@SidewaysKing75 - A mini clock? I want to see that. Post that job, please.
@scottobrien3484
Жыл бұрын
Great video, well explained, clear and succinct…..I’ll be trying this out for myself very soon! 😀
@groundmetalgarage
3 жыл бұрын
Awesome video man!
@amyk9813
3 жыл бұрын
So we're you using clear decal paper in this please?
@SidewaysKing75
3 жыл бұрын
Yes Amy I was using the clear for this video
@parky2310
5 жыл бұрын
Outstanding as always, making my own decals is something I’m just beginning to learn for myself - I’m a little daunted by the software application as I genuinely don’t have a clue how to use it - but this was great to watch! 👍👍👍
@SidewaysKing75
5 жыл бұрын
Thank you very much. There's always plenty of reference on here how to use them and are very good. When they update the software and change the tool references and I'm pulling my hair out, somebody has always solved it and posted a video on here so there's plenty of choice. Stick with it you can crack it :)
@therobbins41406
3 жыл бұрын
great video, im just starting out in customs and am confused what program i need to print my decals with, any help would be appreciated. also what vector program do you use?
@crecio1827
2 ай бұрын
I love this! accurate with quality. I saved this for educational purposes and you earned a subscriber. Cheers!
@howardharaway2259
2 жыл бұрын
What would you say is the best brand decal paper ? I build 1/25th scale car models and want to design race car sponsors, numerals and logo's. I am also wondering how small ( teeny) and legible a printer can print instrument dials like speedometers, tachometers and such. Do you think printers can print in such a extremely small scale ? Thank you, Howard H.
@deandines4599
5 жыл бұрын
I don't know if I missed it but what is the paper called that u print on
@SidewaysKing75
5 жыл бұрын
Links are all in the description Dean 👍🏻
@pablocolombi5768
5 жыл бұрын
Nothing beats Illustrator. Artwork sharp in 1:64 and as big as a building. As always great video mate.
@SidewaysKing75
5 жыл бұрын
Thank you very much Pablo..... agreed :)
@harrsh7116
4 жыл бұрын
Can I just use a clear coat/ clear spray paint rather then clear lacquer?
@SidewaysKing75
4 жыл бұрын
Yes certainly that will work👍🏻
@philspaghet
2 жыл бұрын
Thank you! I'm planning on doing some Acceleracers replicas and this is super helpful!
@BjoernLewin
3 жыл бұрын
First a cuppa :) so bri‘ish - gotta love it. greetings from germany
@SidewaysKing75
3 жыл бұрын
😁 All the best from the UK my friend 👍🏻
@Hi_Doctor_Nick
4 жыл бұрын
Brilliant 👍 Never made any myself but this fills me with confidence. I didn't know the paper and printer are so common. Thought you might of needed some high end equipment.
@SidewaysKing75
3 жыл бұрын
Thanks for watching, glad it can be of use 👍🏻
@bubbagar100
4 жыл бұрын
I paint Necromunda model and want to use Decal on the rim of the bases, to name my models, would what you did in the video work? Is your mico set like ardcoat that games workshop use on there decals?
@SidewaysKing75
4 жыл бұрын
Yes it will still work. The Micro-set helps adhesion and softens slightly the decal on difficult areas, the Micro-sol softens altogether. Ardcoat is different and a finishing varnish for after the decal has been applied and dried out.
@bubbagar100
4 жыл бұрын
@@SidewaysKing75 thank for you help.
@phoenixblack1220
3 жыл бұрын
Absolutely amazing! Do you offer a service of making decals?
@Wes12940
4 ай бұрын
Do you think laser could be better than inkjet? Asking because inkjet and I are no friends. Ink dries up, costs a bunch, etc. Thanks!
@DustyFingersRC
3 жыл бұрын
Awesome. Very interesting stuff.
@SidewaysKing75
2 жыл бұрын
Thanks for watching 🚗😁👍🏻
@MontyTheMaker
3 жыл бұрын
Fantastic and comprehensive guide sir.
@paulh2978
4 жыл бұрын
Excellent and informative video. I've only just managed to work out how to get decent markings onto decal paper, and using a rather old version of Photoshop, but even with normal varnishing thereafter, the images disintegrated on contact with water. After watching this, I went out and bought the brand of lacquer used in this video, to seal the transfers... things worked wonderfully at the first attempt! Using lacquer was such a small adjustment to what I was doing, but very important nonetheless. I make plastic model aircraft kits, so some of the more unusual markings are very difficult to reproduce manually. The sky's the limit now! Thanks again for detailing your routine... ;-). Regards, Paul.
@antennasbc
Жыл бұрын
Nice video with great tips. How can you put a white decal on a dark background? Like the Red BUll car. How do you get just the text and no background white bits?
@hilo4240
3 жыл бұрын
What is the website or program to make the decals
@SidewaysKing75
3 жыл бұрын
I used Adobe Illustrator 👍🏻
@ttlegends24975
2 ай бұрын
Hi, what free software do you recommend for creating decals? Thank you
@spencer_j._
5 жыл бұрын
"Decalls"
@SidewaysKing75
5 жыл бұрын
Correct
@rosscorbett2049
3 жыл бұрын
Just discovered this video. Bloody fantastic! Can’t believe how good the result is! Thanks for sharing your knowledge and expertise. I’ve subscribed and will definitely be watching more videos. Again, many thanks. Ross 🙂
@SidewaysKing75
3 жыл бұрын
Awesome, thank you! 🚗🚕🚓🏎😁👍
@mestapho2011
4 жыл бұрын
BRANDSOFTHEWORLD.COM... you're welcome. I've used that site for 20+ years.. there are so many logos for liverys there I can't even guess. EPS file formats for easy editing as well.
@mendoanz
4 жыл бұрын
what kind of ink do you use?? I've tried to print decals using inkjet printer with special ink for decal...but the result is always not good...the ink always wears off when in contact with water
@SidewaysKing75
4 жыл бұрын
Hi, With the inkjets you need to spray the print over with lacquer to seal it in. I do two coats of this. Leave to dry then when cutting out the design don't cut right up to the edge but leave a minimum of 1mm gap around the edge. Its only Laser printing that doesn't require lacquer first. Hope this helps
@mendoanz
4 жыл бұрын
@@SidewaysKing75 yes I already did that with 2 layer clear coat...but it seems the ink stil wear off when I slide it into diecast body...not totaly wear off only a small portion of ink...but still it ruined the decal color....thanks anyway 👍
@SidewaysKing75
4 жыл бұрын
@@mendoanz Sorry to hear that, the only thing I can suggest is a change perhaps in the lacquer. Its standard automotive lacquer I use which is this.... www.halfords.com/motoring/paints-body-repair/car-spray-paints/halfords-clear-lacquer-500ml
@carsugarmodels
11 ай бұрын
Very nice video. I have a question though. If I want to "print" white letters with no border, how can I do that?
@markhills3922
3 жыл бұрын
AWESOME! Thank you for the loads of tips on how to make decals. I have subscribed to watch more of your no nonsense how too vids. Cheers from Australia
@j-fourschutt3175
5 жыл бұрын
Great video but I was hoping you would explain a bit about printer calibration, because the most common issue I see is people having the colors be way off. And I noticed you use a set of 4 colors
@SidewaysKing75
5 жыл бұрын
I use basic CMYK colours, but nothing fancy. You can let the printer set the colours or the software to be the guiding force with the final print. I think most software is the default, it certainly is with Adobe. I don't calibrate the printer the colours are pretty spot on from the screen to the finished print. Thanks for watching 👍🏻
@j-fourschutt3175
5 жыл бұрын
@@SidewaysKing75 did you calibrate your display?
@loliandira1871
3 жыл бұрын
finally made my own decals, lot of thanks to you bro 😍👍
@jedistreaming4006
5 жыл бұрын
You're amazing, sadly, I don't have a budget to make decals or customize like you. I just do wheel swaps and painting details. Headlights ect.
@s427rt
3 жыл бұрын
10/10
@adambrooker5649
Жыл бұрын
Great video thank you. Can I ask what printer and paper you used in your video. I'm just starting off and would like to know if ink jet or laser is better? It seems ink jet?
@joeblack4807
3 жыл бұрын
Nice decels
@Tentenszx
8 ай бұрын
Great tutorial but any tips for adding decals on a colored car like for example navy blue?
@barpfoto
5 жыл бұрын
also, I don’t know if you’ve tried it yet but I’m not sure that 2K clear urethane is a good clearcoat for the decals before you apply them. It tends to go on pretty thick and while it might work, it is going to pretty much be overkill and may not respond to setting solutions.
@DBs58
4 жыл бұрын
I need to replace the original decal on a 1968 HWS #33 yellow Winnipeg casting for a friend. Any ideas where I can find one?
@nionio2297
3 жыл бұрын
Very cool
@jeffsydor9430
3 жыл бұрын
What do you recommend for decals that are white lettering only? Say like NOS label or something?
@zeroa6
5 жыл бұрын
Hello! ¿is your pinter laser or ink injection?. Regards!
@SidewaysKing75
5 жыл бұрын
Hi its an Inkjet version
@zeroa6
5 жыл бұрын
@@SidewaysKing75 Thanks!
@garryd92
5 жыл бұрын
Loved the videos so far!! keep up the fantastic work and just watch those subs keep rising! Can’t wait to see what’s next!
@SidewaysKing75
5 жыл бұрын
Thank you very much Gary. I'm super chuffed anyone has watched let alone the rate they've all gone up so far :)
@inretention
Жыл бұрын
Hi have you a video on decals for white text/image on a clear background?
@lashgoshotwheels1127
5 жыл бұрын
Where do you get the free hands from
@jasonfisher5040
3 жыл бұрын
Is there anywhere that could scan a decal sheet that's 30 years old and print out some spares . Spent a fortune on an old kit .worried ill mess up . Thanks for any reply .great video
@retu6981
5 жыл бұрын
Please do you can do a skyline r31
@SidewaysKing75
5 жыл бұрын
There will be one coming up soon. Thanks for watching :)
@lebowski7594
3 жыл бұрын
MERAVIGLIOSO
@MossRods
5 жыл бұрын
Awesome video! Is there anyway you could do a follow up for applying decals on a non white car? Thats something ive always struggled with. seems like all the fixers ive tried just make it go transparent
@SidewaysKing75
5 жыл бұрын
I'll be sure to add this as others have asked. I will work on something. All the best :)
@carloerfon6428
2 жыл бұрын
Chiarissimo utile anche per i box ma quale programma è consigliato?...
@LittlePixelTM
5 жыл бұрын
Small question - I wonder if you've ever tried making decals for headlights rather than painting them silver - I guess it could look a little fake like the sticker-headlights you get on full-size Nascar racers - but in some ways it might even heighten the realism you're getting with all your other paint / mudflap / engine wiring scale tricks
@SidewaysKing75
5 жыл бұрын
Yes I 've done them in other scales but haven't given it a thought for this size so thanks for suggesting.... I'll take a look into that. All the best.
@Dyl_Cant
5 жыл бұрын
really helpfull video, never really looked into how to do it... so thanks :D
@SidewaysKing75
5 жыл бұрын
Thank you Dylan..... glad its useful. All the best :)
@AB-ku4my
5 жыл бұрын
How do you avoid any hinges gumming up when applying laquer?
@SidewaysKing75
5 жыл бұрын
I tend to to do two or three light coats, they are very light coats which is enough not to allow any build up. Also between each coat I will open/shut any doors, bonnets, boots etc., and alternate this on the next coat. I've never had an issues :)
@AB-ku4my
5 жыл бұрын
@@SidewaysKing75 Right. I shall have to do some (a lot) of practice and get my ham fist removed.
@emersonsilva9782
Жыл бұрын
Please, can anyone tell how to use the clear transparent decal paper on backgrounds with darker colors? The printings fade out or simply do not appear.
@jeffmaciejewski
2 жыл бұрын
Greetings! Thank you for the very helpful video--well done! What brand of inkjet waterslide paper do you recommend, in particular white inkjet waterslide decal paper?
@SidewaysKing75
2 жыл бұрын
I'm currently in the middle of resourcing. I've tended to buy of Ebay and Amazon and usually buy ones from Suntek
@hafizhnabawi1707
5 жыл бұрын
Does the paper support the Dye-based ink? Because some decal paper only use Pigment-based. And what is the ink on your printer? Can i use an ordinary printer? Pls give me the information Thanks
@SidewaysKing75
5 жыл бұрын
The paper I use supports both inks. I use re-manufactured inks for Epson SX2445W of which kind they are I am unsure. This is an old, 5+ year machine and was cheap at the time too. The paper, whether it is in laser or inkjet format, is designed to go through any ordinary printer.
@hafizhnabawi1707
5 жыл бұрын
@@SidewaysKing75 and what is the brand of the paper? I'm a bit interesting
@SidewaysKing75
5 жыл бұрын
@@hafizhnabawi1707 link direct to Mr Decal Paper's site is in the description 👍🏻
@hafizhnabawi1707
5 жыл бұрын
@@SidewaysKing75 ok thank a lot sir
@strange-universe
5 жыл бұрын
Good stuff! I see you are relatively new to publishing on YT. Looking forward to more from your channel.
@SidewaysKing75
5 жыл бұрын
Thank you. It had been only 2 months of uploading videos and I have plenty more in the pipeline. Thanks for watching 👍🏻
@adamsukiman1700
9 ай бұрын
Are you using white toner or white base decal or just white waterslide decal?
@juanantonioparraruiz7035
4 жыл бұрын
El Cas- Hand Model Carls es un modelo que bien pintado es estupendo pero no lo conozco. Yo lo utilizaría para jugar y para la colección.
@chadlamothe
5 жыл бұрын
This is exactly what I was trying to find out. Thank for providing a top notch tut 👍
@SidewaysKing75
5 жыл бұрын
Many thanks. Glad I could help 😁👍🏻
@valeriep.4716
3 жыл бұрын
I want to use small, intricate floral design decals that will be placed on a black background using clear waterslide paper, as white decal paper would be unacceptable, but printer's ink is quite transparent and the black background will dull the colors considerably. Have you had this dilemma? Do you know of any workaround?
@SidewaysKing75
3 жыл бұрын
Hi Valerie, there's no other way than adding a white toner layer underneath. I have a white toner printer and so print the design in white first, to mask off the dark colour background then place the coloured decal over the top. You can print over the top and do this in one decal but at the fine scale I do they often misalign as I have to run the sheet through the printer twice. It works though 👍🏻
@oeanutbutter982
5 жыл бұрын
What color for black cars decal paper
@SidewaysKing75
5 жыл бұрын
Its a matter of having to paint the colour of the car the colour of the print you want then printing black onto the transparent decal paper with the area you want to show through knocked out..... like a negative print. That way it shows through as if it was printed on.... See how I did the bonnet on this one for an idea what I mean kzitem.info/news/bejne/z4ih1GSiZpmDZaQ
@Sideshowgaz5779
3 жыл бұрын
Great video, thank you
@SidewaysKing75
3 жыл бұрын
Thanks for watching 🏎🚗😁👍
@mider68
4 жыл бұрын
Thank you for the video. Really great explanation of the process.
@TheRivieraKid
5 жыл бұрын
Will there be any Corgi restorations?"
@SidewaysKing75
5 жыл бұрын
Yes there are some planned. There's so much to get through It's all in order of what takes my fancy at the time. Thank you :)
@Seraphickid
3 жыл бұрын
Thanks, Will give a try 👍🏽
@asr90
3 жыл бұрын
what kind of papre you have used for print and what spray you have used ???
@morecaid
3 жыл бұрын
I know this late Idk if your still active but do you need a specific printer or can you use any type like espon
@SidewaysKing75
3 жыл бұрын
Yes any inkjet will do fine 🚙🚗😁👍🏻
@morecaid
3 жыл бұрын
@@SidewaysKing75 thank you so much one thing for sure imma end up putting all kinds of decal on my hot wheels once I get the hang of it
@SidewaysKing75
3 жыл бұрын
@@morecaid once you start you can't stop 😁👍🏻
@matemayer4850
10 ай бұрын
how do you print/make white decals for dark exteriors?
@SebrystianVettel
5 жыл бұрын
can you make another restoration please its so relaxing not gonna lied lol
@SidewaysKing75
5 жыл бұрын
I'm working on a new one. I've been away with work for sometime but back on home turf once more. Not long now.
@theovabz
3 жыл бұрын
Grear video! Could you share the name of your scissors please? Thanks.
@bikefarmtaiwan1800
5 жыл бұрын
Good video!
@thebigdb1
5 жыл бұрын
Just out of curiosity because I’m a computer animator… have you tried 3d scanning when mapping out your decals? Different scanners will do different things… including the 3d program that you’re using… but Blender I found very useful when making a design. Even test fitting it to the object that you’re applying it to. I’ve only done that to Transformers & Legos… but just as a thought I wonder if anybody has played with that. Because what it does is that it flattens a space out where you can work on it… create a skin where you can see what it looks like on the object (digitally), & USUALLY you can directly take that skin without modification directly to the real object. Like I’ve said I’ve done this to Star Wars ships, Legos, Transformers… & it works pretty good. I’m just wondering if anybody has played with it.
@SidewaysKing75
5 жыл бұрын
I haven't to be honest, never really gave it a thought. It would be cool to try but knowing me I'd be that far absorbed in all that I would miss the point of doing my models LOL Its sounds very interesting though, but probably out of my budget to try. Thanks for the suggestion :)
@abdeensntr7751
5 жыл бұрын
What printer do you use that?
@SidewaysKing75
5 жыл бұрын
I use an old Epson SX445W, theres no doubt much better equivalents now 👍🏻
@blobba5442
11 ай бұрын
how would you create decals for dark model cars like black? the decals dont show through
@rob9472
5 жыл бұрын
Blood and sand I didn't expect so many products were involved, Also as a note I use Inkscape for Vector logos on Gran Turismo and it works well for being free.
@SidewaysKing75
5 жыл бұрын
Someone else suggested Inkscape and it looks very good. Thanks for watching :)
@geraldmeli7696
5 жыл бұрын
Great video one of the best explained, i tried this system and it worked on white models. But, can you explain me why when i printed yellow decals and set them on a royal blue model nothing shown and when i printed blue to put on a yellow model it shown light green!! How's this. i can see that the prints are very transparent one released from the decal clear paper. Do you think that i have to print the decal sheet more than one time to have a brighter result? Thanks and looking forward to other videos.
@SidewaysKing75
5 жыл бұрын
Thank you Gerald. You need to print either on white or have a white mask to put down before the transparent decals. A bit tricky when doing text though. There's no way of getting round it sadly other than having a solid white underlay. It's the annoyance of all us modellers.
@GENERALWA5TE
5 жыл бұрын
Excellent video, thank you for showing how simple it can be, as I have no knowledge of drawing packages I will stick with ms Excel or word and just need to get the correct paper for my printer. As I will be doing this on a clear Lexan body shell and applying from behind I have to make note to reverse the decals, (number plates, logos etc). Thanks again. 👍👍
@SidewaysKing75
5 жыл бұрын
Thanks Phil :)
@ElTobeHotWheelsymas
5 жыл бұрын
Nice 👌 thanks for your help 👍 New suscriber 😀
@SidewaysKing75
5 жыл бұрын
Pleasure... Thank you so much for watching and subscribing :)
@luqmannurimanmohamadmahaya1398
5 жыл бұрын
If i use deskjet printer it is ok or not😮
@SidewaysKing75
5 жыл бұрын
Yes that will be fine 👍🏻
@foxxfury145
3 жыл бұрын
What i am confused about how do you know what size to print it and how do you know its going to fit?
Пікірлер: 498