What is the name of the solvent you use with the saw dust? That’s the most important thing
@Liberty1976
9 ай бұрын
I have been refinishing floors for over 30 years, originally we would use the fine sawdust mix it with polyurethane,
@paulmryglod4802
8 ай бұрын
Is it possible to fill 3/16 gaps with this method, and stain the floor afterwards before poly finish?
@GeorgiaWilson-x2l
5 ай бұрын
Is that to flood fill/trowel fill? Can u share ratio please?
@TeeTaumata
2 ай бұрын
@@paulmryglod4802yep
@jameslouden2899
Ай бұрын
Do you need to sand much afterwards?
@adamhall5024
2 жыл бұрын
I’ve been refinishing wood floors for 20 years, I have found that fillers are typically crappy and crack and fall apart way sooner than the floors need refinished. Although you do make the process simple, I’m not a fan of using it. Sanding it is also a problem, after it has set for 20 years, pieces tend to come out
@angushardwoodflooring9216
Жыл бұрын
wood filler does not permanently fill gaps. Woodfiller can TEMPORARILY fill anything, But the gaps changes all year long and the wood filler is those gaps isn't elastic enough to swell and shrink with the season and eventually break up and look like kitty litter. After I informed my customers about it they decide as some of them love the gaps and some are really bother with it.
@williamhartsell6390
Жыл бұрын
@@angushardwoodflooring9216 what product are you mixing with the saw dust? How long do you let it sit for?
@chrissoileau2656
6 ай бұрын
Wood doe, dries in 30 min. You the hit your Final Cut usually 80 grit on big machine followed by spider 120 grit then coat
@RoyceAubuchon
Ай бұрын
I always just bought a bucket of filler
@richardweekes6249
Жыл бұрын
Very good video thank you. What is the type of solvent you use? Do you find it is flexible enough not to crack up during wear? Thank you
@francigaravito3477
9 ай бұрын
after you do that what is the next step? do you use water-based polyurethane?
@mattchapman8477
7 ай бұрын
Do you sand after this step? Will the floor take stain if you're mixing the dust with sealant?
@TheStevecaesar
Ай бұрын
pva mixed with water is a good filler! and way cheaaper..
@jasoninnes572
Ай бұрын
Can you do that? I thought epoxy would be better (so I've heard)
@erryong9892
Жыл бұрын
what brand is the sealer?
@brucek66
6 ай бұрын
Some people use a bucket - next level
@user-volk999
4 ай бұрын
Никогда так не делайте ,не пытайтесь из «чернового пола» сделать паркет 😂 вы только потратите свое здоровье ,время и деньги
@sighck
4 ай бұрын
Is there a similar method for outdoor decks?
@shaleanncluff6186
Жыл бұрын
What did you use to mix with the dust?
@greedly4333
4 ай бұрын
hopes and dreams
@ixchel1215
3 жыл бұрын
Where can I buy the solvent?
@tomasharviemudrunka3168
2 жыл бұрын
It is not a solvent. Wood is rather unsolvable in terms of paint solvents. It is the clear paint that you use to paint the floor. You mix dust into it to create filler.
@angushardwoodflooring9216
Жыл бұрын
look for wood floor polyurethane finish
@StephRenee812
Жыл бұрын
Super glue baking soda and wood chips will hold forever. Tried an experiment with oodles and noodles busted up with super glue dries fast it was a cheap idea and crazy how it will hold up. 🤣🤣
@chrissoileau2656
6 ай бұрын
Try full trowel that method on a hardwood floor 😂
@sarahwallace7554
2 жыл бұрын
What are you mixing w it
@MrAntboy3650
2 жыл бұрын
Sealer is mixed with dust
@angushardwoodflooring9216
Жыл бұрын
wood floor filler with saw dust
@verahutcheson2052
2 жыл бұрын
⁹
@PINKSNAPS
8 ай бұрын
This is a wonderful technique for that application = 100+ yr old wood U r a pro .. 🪵
Пікірлер: 32