question does the glue parts n magnet parts necessary to keep together?
@Kermit_the_addict
4 ай бұрын
@@Doctor-frawley no
@A_Productions
Жыл бұрын
Wow! That Mk V B looked clean! But man, do i wish i knew this before i assembled my figure a few days ago.
@RapidActionAnimations
Жыл бұрын
Nice customization. Edit: btw love the new stuff you added to the store. Keep up the awesome work!
@joshuabaird9405
8 ай бұрын
How do I get to the store
@MegaConstruxed101
9 ай бұрын
Ok but what’s the type of printer you used to print those pieces and where did you get the files?
@LS3D_Printing
9 ай бұрын
I designed the files in the video myself, and I use an elegoo mars 3! I do not sell my files as I have to protect my work!
@MegaConstruxed101
9 ай бұрын
@@LS3D_Printing ok thanks
@MegaConstruxed101
9 ай бұрын
@@LS3D_Printing where did you get the bazaar battle ground at?
@MegaConstruxed101
9 ай бұрын
@@LS3D_Printingalso where could I find those magnets and what’s the brand? Sorry for all the questions
@MegaConstruxed101
9 ай бұрын
@@LS3D_Printing last question. What program do you use for modeling? I would really like to make customs of my own🙂
@MarineStudios
Жыл бұрын
This is why your the best!
@Tobi-YouTube
9 ай бұрын
It's already impossible, idk how you were able to find halo mega construx in person
@neferkaitchorkick
7 ай бұрын
Nice to see someone else not afraid to mix and match the figs. Customs are fire once you find a good combo
@Spartan_215
2 ай бұрын
I don’t know if this is a popular issue, but it says “This site can’t be reached” would anyone know why?
@LS3D_Printing
2 ай бұрын
@@Spartan_215 should be up! ls3dprinting.com/
@Spartan_215
2 ай бұрын
Thank you!
@Spartan_215
Ай бұрын
I forgot to ask, can the mega ODST chest plate fit on the 3D printed chest?
@YaloChief
Жыл бұрын
so most of ur customs are glued together and not held together like normal mega? and its practically its own figure? I thought it would be fully adaptable. Great Job! I thought u would scan the official parts then make yours adaptable
@LS3D_Printing
Жыл бұрын
I did in the past, but I went with a safer option. Resin doesn't flex. So if a part is slightly over cured it will just snap. I'd rather yall glue it to be safe than to basically throw your money away. The 3d scans come in hand so I can have a digital outline where everything is. Helping me so parts don't clip, giving more posability
@YaloChief
Жыл бұрын
@@LS3D_Printing thx. I wondered how yours worked!
@GavinsMovieStudio
9 ай бұрын
Recon helmet please!!!!!
@jerichotimmens8046
2 ай бұрын
Hey, Ls 3d printing. Does your halo infinite chest plates come with a back plate?
@LS3D_Printing
2 ай бұрын
@@jerichotimmens8046 not my MKVII chests!
@jerichotimmens8046
2 ай бұрын
Hey, ls 3d printing. Can you make halo reach elite conversion kits.
@LS3D_Printing
2 ай бұрын
@@jerichotimmens8046 I definitely plan on it!!
@Thethunderstorm_Halo117
6 ай бұрын
How s this so good! I wish I could do that! I will give you $1,000 to make me one! JK 😅
@LS3D_Printing
6 ай бұрын
I sell a ton of parts on my website! Link in bio!
@Kermit_the_addict
4 ай бұрын
Where to find the magnets cause can’t find them in your shop. Love what your doing please keep making this stuff
@LS3D_Printing
4 ай бұрын
Thank you! I most definitely am still making things! I'm more active on Instagram. As for magnets they are 2mmx1mm magnets!
@Kermit_the_addict
4 ай бұрын
@@LS3D_Printing thank you!
@BlackringIII
5 ай бұрын
Where are you that mega halo is on shelves?
@JefePenguino
Ай бұрын
Please make a video on how to paint these
@supersaltlee7657
4 күн бұрын
Hey Im Texas too! Hoorah!
@jerichotimmens8046
3 ай бұрын
Does your product work with regular mega construx torsos because I did not order the torso.
@LS3D_Printing
3 ай бұрын
@@jerichotimmens8046 yes it does!
@ChipsDubbont
10 ай бұрын
Frickin' awesome, dude.
@NoInternetPersonality
3 ай бұрын
i would pay for that
@Spartan832-xu4fy
4 ай бұрын
Can I have that??? PLS? IM BEGGING U! LOL
@LS3D_Printing
4 ай бұрын
Hahaha I sell the parts on my website
@callmekrause4556
6 ай бұрын
Can’t find the magnets on the website. Anyone know where I could find them?
@LS3D_Printing
6 ай бұрын
I got you! I stopped selling them about 2 months ago. Just get yourself some 2mmx1mm magnets on Amazon!
@callmekrause4556
6 ай бұрын
@@LS3D_Printing thank you so very much!
@thedeadbatterydepot
11 ай бұрын
Nice work! I have no interest in using glue with my figures. The magnet idea is intresting
@LS3D_Printing
11 ай бұрын
All good! You definitely need glue for them IF you decide to use my parts for a proper conversion kit. Resin doesn't flex well so this is a safer route! They are also meant as model kits and NOT for play. So if this is what you are intending to do, i definitely don't recommend it. But if you want to display it, a dab of glue is a small sacrifice to transform your figure!
@thedeadbatterydepot
11 ай бұрын
@@LS3D_Printing solid answer, I didn't think of as a model kit. The way the glue was used, looked like the arms could still move, my bad on that. I seek to do stop motions and comics. If I can get the time, trying to find sound effects.
@MegaBricks17
6 ай бұрын
This magnet system is INCREDIBLE!!! MEGA should put this on their figures, it is so good!!
@687-q4o
9 ай бұрын
What store do you go to for Halo mega construx?
@LS3D_Printing
9 ай бұрын
I live in Texas, so I went to my local HEB+
@retrowarrior803
3 ай бұрын
Lookin good
@oucho
8 ай бұрын
I don't know how people assemble these. I am struggling
@LS3D_Printing
8 ай бұрын
What part?
@oucho
8 ай бұрын
Putting the hands in the wrists, putting the joints into the shoulder, and putting the t-joint into the torso. Some of these parts are a lot harder to put on than I imagined.
@oucho
8 ай бұрын
@LS3D_Printing I unfortunately snapped some of the pieces while I was assembling it. Both wrist pieces snapped as I was trying to put the hands on. The parts felt real tight to put on. Some parts I was able to assemble properly. I'm going to buy another batch of parts and hopefully it goes well.
@sure5502
Жыл бұрын
This is a work of art so how much do you think this would cost for every part?
@LS3D_Printing
Жыл бұрын
It ranges! My website link is in the description. You can probably price it out yourself! Just depends on what you want!
@sure5502
Жыл бұрын
True
@kablamy
4 ай бұрын
Out of all those custom pieces I desperately want those lower legs. Ankle articulation would be glorious
@StuffIsStrange
Жыл бұрын
Do a a shirtless torso
@LS3D_Printing
Жыл бұрын
Hahahaha. I'll see what I can do
@nau7ilus
7 ай бұрын
From what I have read it seems the custom pieces dont like working alongside mega ones (eg origional sholder pads or legs) so would shoulders, chest, torso, wrist, belt, thigh, legs feet and helmet (reading from the cite) cover one figure or am i missing something. Like anything else I should know?
@LS3D_Printing
7 ай бұрын
Where are you reading this at? Most people don't have any issues and they seem to fit fine. You just have to use glue. If you are worried about a part being tight. Use a 1/8th drill bit and create a bevel. This is extremely helpful for installing the wrists as those can break sometimes
@Saltycornuts
2 ай бұрын
I cannot find the magnets on your website
@LS3D_Printing
2 ай бұрын
@@Saltycornuts they are 2mmx1mm magnets! You can buy them on Amazon! I took them down recently
@Saltycornuts
2 ай бұрын
@@LS3D_Printing thank you for the help
@randomhaloplayer1893
7 ай бұрын
Do they naturally come in a black color or are they gray
@LS3D_Printing
7 ай бұрын
I just changed everything recently. Any current orders placed will be in the standard grey color!
@randomhaloplayer1893
7 ай бұрын
@@LS3D_Printing k cool thanks for that
@ZetaMotions
11 ай бұрын
Hey LS3D I had a question. I bought one of your articulated legs yesterday and got them but one of the toes that are detachable has a dent so theres no click. You have any ideas for it?
@LS3D_Printing
11 ай бұрын
Are you able to shoot me a photo, either on Instagram or discord? There should be zero damage to them upon arrival. But if there is we can talk in private on how to get this resolved. If you placed an order yesterday I definitely haven't shipped anything out from that date. I'm still playing catch up from going to Seattle and getting COVID!
@ZetaMotions
11 ай бұрын
@@LS3D_Printingand I ordered it on the 4th of this month and got it on the 23rd
@Danxiky08
Жыл бұрын
Does hands from cod line fit in the forearms of your prints?
@LS3D_Printing
Жыл бұрын
Hey! Just not seeing this. Sadly not. BUT I did buy an injection molding machine. My goal is to make my own custom hands with it. I want to keep the aesthetic of the cod hands but the peg diameter of the halo line! As it's thicker and less likely to break
@Josiahs6307
Жыл бұрын
Hey could you tell us what printer you use and how to use it also what sizes for your prints I want to get into 3d printing also do you have some free prints I could try wants I get a printer as well as what filament you use
@LS3D_Printing
Жыл бұрын
I use an Elegoo Mars 3. Best budget msla printer on the market. It's resin based, not filament. I don't sell my files, but there are literally thousands if not millions of free files out there you can test and print yourself! I recommend you learn how to print first, understand the basics. Then learn basic 3d modeling.
@Shoc921
9 ай бұрын
What is the difference between your shoulders and the mega construx ones? I'm just curious. Still that is awesome you've captured so much detail in everything
@LS3D_Printing
9 ай бұрын
Mine allow for more movement! Allowing for a true 90° tilt compared to megas
@Shoc921
9 ай бұрын
@@LS3D_Printing Awesome! thank you for that info!!
@Mrminty42069
Жыл бұрын
Wait what do you do with the left over mega pieces? Afterwards
@LS3D_Printing
Жыл бұрын
You can sell them and make your money almost back
@Crushbone
10 ай бұрын
Awesome tutorial! Just asking, would I have to put glue on the chest and back plates for them to stay on the under suit?
@LS3D_Printing
9 ай бұрын
howdy! Yes, it designed it that way so you don't run the risk of a part snapping
@Crushbone
9 ай бұрын
@@LS3D_Printing Alrighty! Thank you so much!
@adamlopez7933
10 ай бұрын
Were can I get the 3d printed parts
@LS3D_Printing
10 ай бұрын
I have a website! Ls3dprinting.com
@adamlopez7933
10 ай бұрын
Thanks
@reymaster2629
10 ай бұрын
Yo quiero uno a cuánto los vendendes❤❤
@Mrminty42069
Жыл бұрын
Wow didn’t realize you would actually upload it on KZitem but anyways awesome man 👍🏽
@LS3D_Printing
Жыл бұрын
Need to utilize this more. I know It would explode. It just takes time to edit videos! Also another way to reach more people
@Mrminty42069
Жыл бұрын
@@LS3D_Printing Yesh and maybe some random funny halo game play
@fancyrat2.053
11 ай бұрын
When are you gonna restock thigh pieces?
@LS3D_Printing
11 ай бұрын
Ill be starting hopefully this Monday and I'll make an announcement on my Instagram! I've just been busy and brunt out!
@Something1518
5 ай бұрын
That’s dope. If only I had a 3d pronter
@LS3D_Printing
5 ай бұрын
I sell the parts on my website so you don't have to deal with chemicals!
@Tobi-YouTube
9 ай бұрын
WOW that looks good
@xific2164
Жыл бұрын
Do u need to sacrifice a halo figure or can u just use the parts u sell on ur store?
@LS3D_Printing
Жыл бұрын
You absolutely need a base figure! In the future I hope to make it so you don't need one, ( I know distribution is rough in some areas) but you can look on ebay or even in clearance areas in stores!
@xific2164
Жыл бұрын
Thank u, if I ever go to the US I’ll hopefully be able to order and make a figure
Пікірлер: 110