Beautiful final product. I've watched many similar videos over the past few days and your's is by far the easiest to follow and most direct method for the results I want. Thank you,
@cinema6133
2 жыл бұрын
Going through the comments I see you're telling people they can just stick this in their tank. This is not the case at all. If you don't clear coat this with epoxy or polyurethane it will 100% break down over time, and good luck clean algae off it without immediately scrubbing paint off and having it leech into the water. That being said for anyone who is looking to do this, it is safe as long as you apply several layers of epoxy or polyurethane to the front, back and edges and allow it to fully cure before putting it in the aquarium.
@suelysl5871
2 жыл бұрын
Question for you : I've been looking for an epoxy/polyurethane brand that is garante non-toxic and tested for underwater use. I have found a few alternatives, but none in my country, Canada. Are all epoxy/polyurethane safe for fish? Thank you!
@cinema6133
2 жыл бұрын
@@suelysl5871 they all have pretty toxic fumes before curing, but once fully cured they are all 100% safe in the aquarium
@themayker3812
2 жыл бұрын
This one in the video is submerged in the tank with water. It has no issues what so ever 9 months later. Appreciate your comment though. So people in the comment section will have ideas if they plan to do something like this.
@FGDireito
2 жыл бұрын
If I have, for exemple, a plastic airplane model, can I use the Polyurethane Clear Coat to make it cold freshwater aquarium safe? Thanks for the info!
@aaronk4310
Жыл бұрын
Fusion is fish safe and come in a self curing epoxy paint in lost of colors. Mod pods is a fish safe clear coat and non toxic kids use it . I've used it in my chiclids tank but it has to dry like 2 days and won't eat that foam. Some clear costs will burn right threw it. Gorilla glue is safe I brush the original on foam board mix with sand a gravel and boom rock wall or you can super glue moss after and get a moss wall. Hope this help someone.
@jaybek7707
3 жыл бұрын
Looks so real Very talented artist!
@japhetzayas7194
2 жыл бұрын
The most realistically rendered DIY aquarium background I've ever laid eyes on. I will follow this template in the hopes of mastering this art.
@tayfunyigit9166
3 жыл бұрын
Congratulations on a perfect design
@ramilespenilla4296
7 ай бұрын
Do the cement from the styro foam fall off overtime? since it was submerge all the time.
@andersrymdfarare5790
2 жыл бұрын
the damn music destroys everything, its like going to a rave while watching this video
@soringsorohot5034
3 жыл бұрын
Ang ganda lods..
@DINHVANTAM-QTRI
5 ай бұрын
Rất đẹp. Chúc mừng bạn. 😊😊😊
@rajacool1911
Жыл бұрын
Tq for your post video.
@benakagowda262
3 жыл бұрын
👍👍👍🔥🔥
@bryanfehse6546
2 жыл бұрын
What do you use for the skim coating?
@blissfulblooms5656
2 жыл бұрын
Very nice . Could you suggest whether you applied Oil paints or some Fish water friendly colours since we don't want the water PH to fluctuate. Kindly suggest
@shivamchouhan9032
2 жыл бұрын
I've seen one before they are not kept inside the tank just behind outside the glass
@ryanrogers8211
Жыл бұрын
@@shivamchouhan9032 it's to be kept insde
@trixceetan3672
2 жыл бұрын
Hi, will tile grout stick to the Styrofoam? I used tile grout+waterproofing, and it's still curing. Not sure if it will stick to the Styrofoam well enough when submerged
@ronflores1083
2 жыл бұрын
What kind of paint should I use?
@lilreagreg28
Жыл бұрын
What kind of paint is safe?
@nitheinkyaw4218
Жыл бұрын
what type of colour paint do you used
@saivenkatff5243
2 жыл бұрын
Plz mention link in description
@muitkevinkenneths.bshm1f890
4 ай бұрын
ano po gamit nyong paint?
@rabidrabbit8727
3 жыл бұрын
What paint your using? Will it not dissolve in the water from the aquarium?
@themayker3812
3 жыл бұрын
Just using water based acrylics (latex paint in my case) . Latex paint is waterproof if you let it dry properly. If you plan to diy, give it a good rinse using just water after letting it dry overnight. That way, the Ph level in your aquarium will not be affected by the 3d background. Hope this helps. 😁👍
@illuminousbrown333
3 жыл бұрын
Are you sure this is safe for the fish?
@sriramram5719
2 жыл бұрын
Sir acralic oil based use ok
@SouthCoastFinest
Жыл бұрын
How long will a homemade 3D background last? Has anyone made one and regretted it?
@airizha
2 жыл бұрын
pede po ba yan i-cut into pieces pra pede iship? fb page?
@NYRIKAN
3 жыл бұрын
HOW MUCH FOR THE SAME THING FOR A 90 GALLON ?
@themayker3812
3 жыл бұрын
Good day to you sir! I do accept customized 3d backgrounds but i can only accommodate clients in my location. But for a 90gal tank will cost you 25 dollars
@NYRIKAN
3 жыл бұрын
@@themayker3812 MAKE ONE FOR A 90 GALLON ..PUT IT ON EBAY AND I WILL PAY 50 FOR IT..
@jppj4886
2 жыл бұрын
Magkano ganyan idol? Pwede omorder sayo?
@guidryaquatics
Жыл бұрын
How could you not use cement, mortar, epoxy ot even clear coat With polyurethane Styrofoam will break down and you'll have pieces of painted Styrofoam everywhere! Especially with cichlids! And algae? you have to take the whole thing out and treat with hydrogen peroxide and then put it all back in. you missed a very vital step. Sorry. Would like to see how it looks now! honestly🤔
@jonathanatkins5848
Жыл бұрын
Is cement applied before the paint, and epoxy after the paint?
@leonardkollin5143
2 ай бұрын
What type of paint did you use?TIA
@tayfunyigit9166
3 жыл бұрын
The paints you use besides your workmanship are of very high quality.
@michaelcarvalho3686
2 жыл бұрын
Can acrylic paint be used for this background?As this background will go into the tank. And what type of paint are you using?
@moushumighosh8152
7 ай бұрын
What making 3 d background with water and cement, the 3d background not submerged in water, what to do.
@twctoycollections3888
11 ай бұрын
What type of water proof paint did you used?
@Vynzue
2 жыл бұрын
Can we put this inside the tank after it finished and dried?
@ryanrogers8211
Жыл бұрын
Yes that is why he made the background.
@chriswright5893
Жыл бұрын
Anyone know what paint best and what to use to waterproof it all
@michaelcarvalho3686
3 жыл бұрын
Superb video.Does this paint affect the fish in the aquarium?
@themayker3812
2 жыл бұрын
No, you're good to go if it's dried properly
@stanlee7145
3 жыл бұрын
What kind of paint can we use
@themayker3812
2 жыл бұрын
Any latex paint available in your area will work just fine sir
@tidieu2615
2 жыл бұрын
@@themayker3812 can u make the 125 gal ? If u do txt me 4145269191 i’ll pay for it
@MrGuimenegatti
2 жыл бұрын
Hello , what is skim coat? I cant translate
@Addysvlogg
Жыл бұрын
Which paint is that
@brookebiddle6199
2 жыл бұрын
But is it safe for fish ???
@legrev1234
3 жыл бұрын
Super cool bro. Anong brand ng latix paint gamit mo?
@themayker3812
2 жыл бұрын
Thanks bro. Minsan triton or boysen lang po. Depende kung ano lang available.
Пікірлер: 62