Very helpful webinar, as was the first one on NAS set-up. These QNAP NASs are quite easy to set-up even by non-IT professionals and they provide excellent protection of vital data. I'd recommend these products without any reservation. I use their NASs for storing the video files on my channel.
@ÁngelMartínez-AzzarGroup
9 ай бұрын
Hi ! How can I know or how can I calculate the amount of GB/TB has to got the LUN volume?. Thanks for the video
@tarzan12345
3 жыл бұрын
I've used a Synology for many years and recently decided to make the switch. Picked up a 4-bay QNAP last week and I'm still learning how to configure it correctly. These webinars are long but super helpful. It makes my transition from Synology to QNAP a little easier. After watching this it made me wonder if it is possible to remove one drive from a RAID 5 storage pool? I currently have all 4 drives in one RAID 5 pool but the SSD caching seems really cool so I was thinking I could one day replace 3 drives with larger ones (and make them one RAID 5 pool) and the 4th one with an SSD for caching. Thank you.
@andybb
2 жыл бұрын
Hi Is there an update to this video as my TS-h886 version h.5.0.0.2022 shows different settings for cache Acceleration. I have 100 TB of storage what size SSD do i require?
@warwickharty172
2 жыл бұрын
Is it worth SSD caching to run plex?
@kevinberry436
2 жыл бұрын
I can't get Cache acceleration to work. I have a 500GB Ironwold Pro SSD in Bay 1, its been formatted and a volume created (is that the issue), when I choose Cache Acceleration and then it shows the list of drives, I see it but it's greyed out. Is it only PCIe SSD's that can be Cache drives? I'm using the QNAP TVS-663.
@MikeFaucher
3 жыл бұрын
Great video. I do have one question, I understand the performance hit while snapshots are being taken, however, is there a performance hit during the idle time when you are not taking snapshots such as in-between schedules?
@MikeFaucher
3 жыл бұрын
@@QNAPUK Awesome, thank you for the clarification.
@ceciliatoftero9174
3 жыл бұрын
This is my first NAS and I wonder, do I need snapshots if I use RAID1?
@drvish
3 жыл бұрын
I've had my NAS for over 2 years now and with all the lockdowns, i've been digging into it more and more, setting up Pi-Hole, QVR and more. I'm finding these seminars very useful in fine tuning my setup using things like snapshots, etc. Thank you very much for all these! QTS is much more powerful than I thought it was going to be when buying it >2 years ago.
@drvish
3 жыл бұрын
@@QNAPUK Your welcome. I have a question about Storage Snapshots. At the moment, I have it enabled for my Storage Pool 1, which has just a single DataVolume. Inside this, I have several different folders for photos, Plex, doc, etc. Is there a way to exclude snapshots being generated for any of these folders?
@NasaRacer
2 жыл бұрын
I am setting up a new TS-873A and I want to use two NVME SSDs in the internal NVME bays with Qtier to tier with 8 SATA Drives in the other 8 bays. But Qnap website has this guidance on the TS-873A web page. "4. It is recommended to create an SSD RAID with at least two SSDs for the QuTS hero system drive to attain optimal system performance." That makes perfect sense to have system on fast SSDs. So if I first setup my 8 SATA drives the "System Drive" will be assigned to that slow SATA spinning drive pool. But if I setup an SSD Pool with two NVME SSDs in Raid 1 as my first pool I then can't use it with Qtier? Am I missing something? Do I just setup first pool of 8 SATA Spinners and just count on Qtier to move "System" files to the faster SSD Tier?
@NasaRacer
2 жыл бұрын
@@QNAPUK So I am going to use Hero so now I would dedicate the SSD RAID 1 pair to caching instead. So I need expansion card with another SSD RAID 1 in order to install system on SDDs and Cache the main pool. My drives arrive soon from Amazon so I am trying to figure out best practices to setup this unit and start loading it with data. I want to avoid mistakes that will require starting over. Thanks again.
@johnsnyder751
2 жыл бұрын
Excellent video. Question regarding the use of storage pools and the system volume. In one QNAP Video, I saw that storage pool 1 was setup with a single volume for system and then storage pool 2 was setup for all additional volumes. On this video, all volumes are configured under storage pool 1. Which is the preferred configuration for QNAP and why?
@johnsnyder751
2 жыл бұрын
@@QNAPUK Thanks, that makes sense. I specifically work with QTS based QNAP NAS devices, so was not thinking about other QNAP Operating Systems and how they might function. To speed up the volume scan after a crash or when an event is detected, I typically try to keep the system files in their own volume (sysvol) and then create a data volume for all the other files. This way, I can expand either volume based on growth without effecting the other volumes. Appreciate the quick response.
@N3kr0manc3r
2 жыл бұрын
I recently purchased the same qnap ts-h886 Nas. I don't see an option to create a volume...how can I selectively disable snapshots on a shared folder in a storage pool?
@N3kr0manc3r
2 жыл бұрын
@@QNAPUK thank you for your response. Your videos are quite helpful and I've been going through many of them. I am using quts hero and was wondering why I can't find qtier option as you show in another of your videos?
@darcyfalardeau762
3 жыл бұрын
is it possible to setup a remote Qnap server as the destination for snapshot replication job?
@darcyfalardeau762
3 жыл бұрын
@@QNAPUK Thanks. I use QBELT VPN and was just able to use the remote units VPN ip address to connect the drive. Works perfectly, thanks. PS: Your knowledge on the product is impressive, and the quality and overall presentation of your videos(s) is first rate!
Пікірлер: 19