My gosh you've got a BEAST setup , thanks for sharing your knowledge!
@tholo86
Жыл бұрын
Dude got a beautiful voice.
@clemm1012
3 жыл бұрын
Wow I was so confused at first with all the numbers now I get it. Thanks man
@1badawg66
10 ай бұрын
Are we supposed to be able to read that stuff you’re putting on the screen?
@xTopTenSportsx
4 жыл бұрын
I like the music in the background!
@krewcrosby3289
3 жыл бұрын
Pro trick : watch series at flixzone. Been using them for watching a lot of movies lately.
@brodiealexander4247
3 жыл бұрын
@Krew Crosby yea, have been using flixzone} for years myself :)
@MUSIC-ve5sc
2 жыл бұрын
Hi, i have 2 Rockford Fosgate Power T1S2-12 and do not have a clue what hat amp I should use. You have any tips?
@surviver5738
3 жыл бұрын
Hey man, what kind of alternator setup do you have to power those 2 2000w subs? Do you experience light dimming? What car do you have?
@vibinreloaded9242
2 жыл бұрын
Bro sugeest a amplifier suitable for jbl gto 1202d...u said its should have a correct amp to give the right output so can u suggest one...please
@keilwenlute6083
3 жыл бұрын
I have 2 10 inch Boss subwoofers 800 watt 4 ohm. What amp do I need to push these subs??
@beepityboop-ARES-
5 ай бұрын
Is it good to match the subs wattage with an amp I have 2 skar audio 12 inch and in both speakers it’s 2500 watts and I have a sundown audio amp that’s 2500 rms the speakers are also rms so idk if it’s good to run them at the same level and not over go on the amp
@djlennyvivo7444
4 жыл бұрын
Good teaching
@treyfulleton4820
3 жыл бұрын
So i have ds18 2 12s and my amp is 5500 watts right now i have 4 gage power wire and 4 gage ground wire i have 2005 chevy trail blazer and i was thinking about maybe trying to bridge my subwoofers and go with 0 gage wire just dont really know what i should do bc i dont think im seeing full potential out of my subwoofers
@datboigater_
2 жыл бұрын
What amp and ohm set up would you run with a single sub. Audio pipe BD-3 DVCoil ? I’m so confused 😕
@NicholasSnowProductions
2 жыл бұрын
You should be fine running a 1000W amp on the BD3 since it is 900W RMS
@datboigater_
2 жыл бұрын
@@NicholasSnowProductions thanks. 1000 watts amp. Copy. My thing is some amps have rms ratings so that is where I get confused but ty. I’ll look into it
@trilliedon8728
3 жыл бұрын
I remember running a Skar Audio amplifier to .5 ohm back in November and it kept chipping and when i changed it to 2 ohm after realizing i did the wiring wrong it still kept giving problems so right now it’s just thrown down since. And I didn’t even have it that long but it was really pushing some bass nonetheless
@408BARZ
2 жыл бұрын
Hi I have 2 kicker comp 15s and was given a hifonics 1700 Brutus amp.. is this a good combo? From my research but with my non extensive knowledge I’m thinking the amp is not enough for my subs. Ty
@andrius0barstys0
3 жыл бұрын
Helped a lot
@NicholasSnowProductions
3 жыл бұрын
That's great to hear!
@alianasanchez160
2 жыл бұрын
I have a 12 inch sub 250 rms. Can u figure out what power out put I’d need for my amp?
@NicholasSnowProductions
2 жыл бұрын
What brand sub is it?
@Skipzz97
2 жыл бұрын
Can You Make A Vid On How To Wire The Direct Lead Subwoofers,?
@dannymartinez8314
2 жыл бұрын
Can l run 2 12 dvc 4ohms with rms 750, on a class d monoblock 1ch that 1ohm stable 2000w, the amp is nesa td-100 3000w, the dvc subs are ds18 elite-z12. Hope you can make out what the info i gave, it's confusing to me.
@NicholasSnowProductions
2 жыл бұрын
That should not be a problem, those subs should be able to handle a little over rated power. I would not put them on anything bigger than that amp though
@dannymartinez8314
2 жыл бұрын
Awesome brother, thanks for your help, its crazy how small that amp looks, looks can be deceiving.
@dannymartinez8314
2 жыл бұрын
@@NicholasSnowProductions oh, by way, just so i understand right, it's alright to wire both dvc to ending with a 1ohm impedance, or should i hook it up to a final 4ohm impedance.
@NicholasSnowProductions
2 жыл бұрын
I would wire them down to 1ohm as long as the amp supports it and it looks like it does. You will get more out of the amp by being wired at 1ohm. Very rarely will you be wired at 4ohm
@sheloveflacco
2 жыл бұрын
yo bro i need help im trying to run two 10 inch skar subs that are 1000 rms each and i can run them at 1ohm or 4ohm i just can’t figure out what amp to get.
@NicholasSnowProductions
2 жыл бұрын
For that setup I would run a Skar RP-2000, that would give the subs the power they want
@marleymar2644
2 жыл бұрын
I have 1 -15 inch sub at 1 ohm 1800 rms so what do I set all my amp knobs at ? An what do I set my pioneer head unit at as far as lpf an hz for the sub?
@NicholasSnowProductions
2 жыл бұрын
Setting the LPF around 70-80hz would give you the best outcome
@aceflocka8782
2 жыл бұрын
I got a question so I'm looking at some subs rms on the sub's is 650 daul 2+2 ohm and the amp rms is 2000 so is that a bad set up I'm new to the game want to ran two 12s
@NicholasSnowProductions
2 жыл бұрын
How much power does the amp do @ ohm?
@aceflocka8782
2 жыл бұрын
@@NicholasSnowProductions Rockville dB16 8000 Watt Peak/2000 Watt Dyno-Certified RMS Mono 2 Ohm Amplifier Car Audio Amp Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc) - 2 Ohm: 2000 Watts x 1 Channel
@naturallyaspirated3810
2 жыл бұрын
So I’m planning on getting a 2500w rms subwoofer. will the Taramps 3000w rms @ 1ohm be too powerful or just right , I went by your no more than 125% rule. Please someone help I’m new to all of this . Just getting started.
@NicholasSnowProductions
2 жыл бұрын
Honestly that should be fine as long as the sub is truly rated for 2500W RMS! What brand is the sub?
@xavierr7590
3 жыл бұрын
I was think about getting 2 - Massive Audio HIPPOXL152R @ 3000w RMS , dual 2 ohm… any suggestions on what amplifier to use ? 🙏🏼🙏🏼🙏🏼
@djmaverick8108
Жыл бұрын
4000 RMS @2OHM AMP
@veronicasoriano4026
4 жыл бұрын
Very informative!
@NicholasSnowProductions
4 жыл бұрын
Glad you liked it!
@jorgesaldivar2864
3 жыл бұрын
I have a autotek 4000 wtt amp and i having trouble finding a pair of 12” subs for it have any idea what subs would be a good match !?
@Anon_Sun
3 жыл бұрын
Ok so I got 3 12in Kicker comp r subs, DVC 2ohm 500 watt rms (cont) 1000 watt (max) what amp would you recommend to run them continuously and smoothly?
@marcuslinton310
2 жыл бұрын
For continuous use, I would recommend wiring to 3 ohms not 1.34 and run something like a SFB-3000D which should have plenty of power at 3 ohms without being too overpowered.
@norbertovargas1931
3 жыл бұрын
I have a audio control lc6.1200 what's a good sub to hook it up to the 5/6 channel?
@loloent
3 жыл бұрын
So I did good with my 2 10's evl @1k ea. Rms with my skv2 2500.1 @1ohm stable wired?
@loloent
3 жыл бұрын
Cool I'm just waiting on my tuning tool to come in so I can set my gains right.
@edwarddamond5514
3 жыл бұрын
What's up man, I'm looking to setup 2 skar 12" dual 1 ohm 3000 watt speakers and I need help finding same brand amp that will fit well. Any feedback will be appreciated thanks
@taku_king9023
3 жыл бұрын
Can I hook up a 12inch sub 500watt rms on a 300w pioneer amp and still get good bass?
@Primo956tx
3 жыл бұрын
I got a skar audio subwoofer 800 watts rms dual 2 ohms the peak 1600 .what amp is good to match
@ryandodson3397
3 жыл бұрын
So I have two dual 2ohm 1100 watt rms subs which adds up to 2200, i should get a 1 channel 2500 watt 1ohm amp or a 2500 watt two channel 2ohm amp
@cameronk7706
3 жыл бұрын
I’m lookin at getting a audio pipe BDC4 12 inch sub and was wondering what amp would be good. Any suggestions?
@NicholasSnowProductions
3 жыл бұрын
The APMN-2000 would be a little more power than you need but you could always turn back the gain. audiopipe.com/collections/amplifiers/products/apmn-2000-mini-design-class-d-mosfet-amplifier The APMN-1300 would be a little under power but it would be hard to blow the sub on this amp and it's at a better price. audiopipe.com/collections/amplifiers/products/apmn-1300-mini-design-class-d-mosfet-amplifier
@cameronk7706
3 жыл бұрын
Nicholas Snow yeah it was between those two before I saw the APCLE 1500 class d mono amp. Will that be good?
@sanchosanchez1210
3 жыл бұрын
I just bought boss elite 12” 500 rms each 4ohm dual voice coil was wondering what to look for in a amp
@DARKBRINGERx
3 жыл бұрын
Anywhere from a 500 to 1k amp at 2 ohms
@jerzyrob21
3 жыл бұрын
This was great information
@NicholasSnowProductions
3 жыл бұрын
Thanks! Let me know if there’s any videos you’d like to see.
@erniesantos5212
3 жыл бұрын
I have 8 8” bass rockers midrange speakers 300 watt 150 rms 4 ohm but don’t know what watt amp to get for them I would like to use a taramps to power the speakers or if I should get 2 amps one for 4 speakers and another for the other 4 I have no idea what watt amp to get my subs I have 2 12” bass rockers dual 4ohm 600w Rms 1200 watt I want to get a taramps for my subs as well I also have a chuchero box with 6.5 bass rocker speakers with 1” tweeters it’s 800 watts I have no idea what’s the rms is but don’t know if I have to get the chuchero box it’s own amp so basically I need to know what watt amp I should get for each how many if more the 2 how many channels for each I want to use the brand taramps to power my subs and my speakers and if need be my chuchero box help
@TheAustin12398
3 жыл бұрын
Is it ok for the peak power of a amp to be way higher then the sub if the rms is The same ?
@marcuslinton310
2 жыл бұрын
Yes
@BenaresDarkness
4 жыл бұрын
If anyone is curious the hippo xl subs are good for 2500 rms so you would need a 6k amp also your ohm load will not stay at the exact one you wired it to.
@NicholasSnowProductions
4 жыл бұрын
Correct when you are playing music, your resistance or ohm load will fluctuate.
@yrekamade5569
2 жыл бұрын
can i use a1400 RMS woofer on a 1200 rms amp?
@NicholasSnowProductions
2 жыл бұрын
Yes, you can definitely use a 1400rms woofer on a 1200rms amp. Is the subwoofer DVC or SVC?
@yrekamade5569
2 жыл бұрын
@@NicholasSnowProductions it's a dvc
@NicholasSnowProductions
2 жыл бұрын
@YREkA MADE As long as the ohm loads match up then you're fine to use thhose together
@yrekamade5569
2 жыл бұрын
@@NicholasSnowProductions daul1 ohm dvc
@NicholasSnowProductions
2 жыл бұрын
@@yrekamade5569 If you're using one sub then it's going to be at .5 or 2ohm, what's the lowest your amp goes?
@cmackinahemi300c
2 жыл бұрын
I’m in Indianapolis bro maybe you can help me out with my amp needing a good tune let’s connect.
@NicholasSnowProductions
2 жыл бұрын
I am always down to help people out with their system!
@yaseenrana7874
3 жыл бұрын
i want to install 2 subs (GTX64 - 6" 250 WATTS RMS DUAL 4 OHM SUBWOOFER) and Component (EMK6 V2 - 6.5" 125 WATTS RMS COMPONENT KIT SPEAKERS ) please suggest amplifier of Massive Audio. thanks
@NicholasSnowProductions
3 жыл бұрын
If you wanted to have one amplifier that ran both the subwoofers and the component speakers you could go with the Massive Audio EX5.www.massiveaudio.com/collections/amplifiers/products/ex5-5-channel-amplifier This amp with have enough power to run 4 of the component speakers and two of the GTX64 6" subwoofers. You can wire the subwoofers down to a 1ohm load to give you the most output. The link below is a wiring guide that will show you how to wire the subwoofers to the 1ohm load. soundqubed.com/wiring/
@marquezjose0187
2 жыл бұрын
Can anyone help me out please. Trying to see how can i wire 2-15" massive hippos 2000 rms 2 ohms each with a soundqubed sq4500-1 amplifier? I would greatly appreciate it. Thanks in advanced.
@dt64bulldog
4 жыл бұрын
not all amps are telling truth about what it puts out. and with box rise your ohm load does change
@willrice7760
3 жыл бұрын
Hey man I want to install 2 12 inch championship series pro subs 4 ohm and 1000rms, could a 1000 watt amp from Memphis work?
@NicholasSnowProductions
3 жыл бұрын
Which Memphis amp are you looking at?
@willrice7760
3 жыл бұрын
@@NicholasSnowProductions prx1.1000
@willrice7760
3 жыл бұрын
@@NicholasSnowProductions Memphis class D amp
@NicholasSnowProductions
3 жыл бұрын
You could use that amp and wire the subs down to 1ohm but you’ll only be giving your subs half the power they can handle. I would recommend getting an amp that can do 2000 watts at 1ohm
@willrice7760
3 жыл бұрын
@@NicholasSnowProductions what gauge speaker wire should I use
@One-Crazy-Cat
Жыл бұрын
I blew a sub once. Was a small crew though. Lol. Jk jk jk.
@cleofiesjackson1983
3 жыл бұрын
Hey I have 2 Skar Audio zvx 15 v2 rms at 1500 both at 2 ohms and the amp I'm getting is the Skar audio rp 4500 what ohm should I wire both subs to?
Пікірлер: 85