Thanks for the tips. Just did my first Tac welds on my newly purchased MiG 140. Need alot of practice but it’s a great machine !!!
@eastwoodco
3 жыл бұрын
👏 Glad I could help! -JD
@airforceoneye2663
2 жыл бұрын
Old school welder. Used a Miller 220, 100 % duty cycle with .032 wire and 95/5 argon/co2 shielding gas.
@stratosjeff7007
2 жыл бұрын
just ordered the mig 135...can't wait to get started
@shaynechild2517
2 жыл бұрын
I just got the last of the basic set up equipment for my new Eastwood elite 140i multi welder . I had to buy everything, and the argon bottle was almost as much as the welder 😂 lol! I have 3 project cars I will be using my new Eastwood welder on to weld in all the new sheet metal in place. I am very pleased with my purchase and the people at Eastwood have been great to work with. I am so excited to use all of the features, specifically the tig welding mode! Now I need to get a few Eastwood decals to put on my welding cart and garage! Keep them Arc's burning!!
@eastwoodco
2 жыл бұрын
We're proud of you, Shayne! Send us some pictures of your project cars! @eastwoodco on Instagram. 😎 -JD
@TheJ3llyboy
2 жыл бұрын
Pretty cool stuff. Couple tips I never heard before.
@eastwoodco
2 жыл бұрын
Glad I could help. -JD
@HowardJongeward
Жыл бұрын
well done on the video. thanks
@KatoNakamura
3 жыл бұрын
Nice Job Greetz from Canary Island
@twostroketom
3 жыл бұрын
Excellent and very informative, thanks👍👌
@bobduker
2 жыл бұрын
Awesome thanks
@KINDAtheexpert7608
2 жыл бұрын
I've been a welder since about 2010 and I have been TRYING to no avail to describe the "smell" of the welding process. Lol "sweaty nickels" is EXACTLY how it smells🤷♂️🤣
@eastwoodco
2 жыл бұрын
HAHA, I got a good laugh out of my videographer with that one. -JD
@TwoWheelRocco
2 жыл бұрын
Great Job, Ty..
@eastwoodco
2 жыл бұрын
Thanks for watching! -JD
@Cr4ZzZy
Жыл бұрын
Amazing
@bigdog-ff3cd
3 жыл бұрын
Thats a good machine to have
@1planenut62
2 жыл бұрын
Love to see some tips for butt welding thin metal, as vintage VWs. I use a Miller 130 with .023 wire, and I struggle. Everything has to be stiched.
@eastwoodco
2 жыл бұрын
We have a "Sheet Metal In Minutes" video coming soon. That will be a condensed how-to video with some good tips and tricks. Keep an eye out for that one. -JD
@stevensanabria1326
3 жыл бұрын
Good job, Joe! I learned a lot. Thx.
@eastwoodco
3 жыл бұрын
Glad to hear that! -JD
@dennisschickling2249
3 жыл бұрын
Lol Joe it's going to be a long time till you have that Giveaway.
@eastwoodco
3 жыл бұрын
As soon as we hit 500k subscribers, we'll pick a winner for the MIG 180! -JD
@dennisschickling2249
3 жыл бұрын
@@eastwoodco YES I KNOW THAT. BUT WILL YOU MAKE THIS YEAR?
Did you put sail pannels on the corvair or was that a different car.
@richa7812
Жыл бұрын
I purchased the MIG 90 as a first timer. Should I have purchased the higher level machine as a better investment? Thanks again for the informative videos.
@eastwoodco
Жыл бұрын
The MIG 90 is a great machine, it really depends on what you are working on though. The MIG 90 can still weld up to 1/8" thick
@inkmonster0u812
2 жыл бұрын
How to change nozzle? I have a mp140i
@chadpalmer8640
3 жыл бұрын
Nice 👍
@eastwoodco
3 жыл бұрын
Thanks ✌ -JD
@eddss123
2 жыл бұрын
Nice machine, I just got my mig 140 and I don't know if it's just my welder or that's the way it is. If I turn the wire speed up and push the trigger, it starts to feed the wore normal speed then it speeds up. Is that normal on this welder?
@eastwoodco
2 жыл бұрын
I believe you're referring to the "quick feed" function. If the machine notices that an arc hasn't been started, it will speed the rollers up. You'd use this feature to quickly feed the wire after changing a spool. If your machine is speeding up while you're welding, that's a different story. -JD
@eddss123
2 жыл бұрын
@@eastwoodco I see. Yea it was when I was feeding the wire and not while welding. I read the manual and didn't find anything on that. Thank you for the response. It's a really nice welder
Пікірлер: 38