Clear, helpful, and in just over 7 minutes, you've explained what would take a lot longer to fathom out in the user manual. Thanks!
@flash9251
7 жыл бұрын
Greg, I find your vids to be the most informative and easiest to understand, hands down the best. Thanks!
@zlippery1
7 жыл бұрын
Thanks Greg. I finally understand VCA faders!
@Teebi928S
3 жыл бұрын
Thanks Greg, you've successfully lowered my blood pressure!
@jamesrossmusic6013
3 жыл бұрын
Thanks Greg!
@anthonystahl
5 ай бұрын
Excellent!
@sunnyheartley7184
5 жыл бұрын
Love it Love it you make things so clear...some Cubase videos the presenters have had too much coffee...but not you Greg Ondo
@MarkFeaGuitar
7 жыл бұрын
Excellent - very useful, thanks!
@gazmellen7881
5 жыл бұрын
so concise
@roto_makara
6 жыл бұрын
I'm new in cubase and this was a very informative video. thanks
@davidpodeschi5574
6 жыл бұрын
Great info in a compact video. Thx.
@rolandgerard6064
6 жыл бұрын
I use VCA's a lot, very good feature.
@madhum.s
7 жыл бұрын
Doing good things for cubase users Thanks
@Mr.HYd3
7 жыл бұрын
Thanx Greg :D
@pjdahmen
4 жыл бұрын
Great tutorial
@dmues5s
7 жыл бұрын
3:30 - In My understanding, grouping should NOT affect the effect sends in the channels, which is the main disadvantage of groups vs. VCA faders.
@AsesorMusical
4 жыл бұрын
David, I think he means the opposite. Let´s say we have a set of channels and call it "set 1". If we assign set 1 to a group and lower the group's fader, we will lower set 1's summed output level. However, set 1's faders will remain in the same positions, which also keeps their respective send levels and therefore causes an imbalance between the send effects' output level and the (now lower) output level of set 1.This imbalance risk is resolved through VCA faders. If set 1 is assigned to a group, it is not possible to modify its faders' positions with the group. The group's fader just controls the level of set 1's output. Thus leaving set 1's send levels intact. But if we assign set 1 to a VCA, moving the VCA fader DOES move set 1's faders, thus conserving the proportional relationship between set 1's output level and the output level of all its effect sends. Hope that makes sense.
@corlandia
3 жыл бұрын
@@AsesorMusicalIs it then correct to assume the individual sends of "set 1" channels should be "post faders"? Since "pre fader" would not benefit from the VCA moving/controlling the mention "set 1" faders?
@AsesorMusical
3 жыл бұрын
@@corlandia Oh yes Alex. For VCA faders to affect send levels, we should use post-fader sends. All pre-fader sends are independent from VCA faders and should be modified respectively. Maybe there is a way to link pre-fader send levels to VCA faders, but I haven´t researched about this. Maybe through Quick Controls? I don´t know. That's one thing I love about Propellerhead Reason's modularity. You can modulate any knob with just about any other knob in the rack.
@creatiw
3 жыл бұрын
@@AsesorMusical wow a lot to to take in but I think I finally get it. Thanks guys!
@ivannikolaev2293
2 жыл бұрын
@@AsesorMusical excuse me, how should we apply group dynamic processing then? Because automating VCA will change the level of channels in the group also changing the level that goes into the groupcompressor. I usually just don't use VCAs: I have all my effects within the corresponding group (i.e. snare reverb in drum group or vocal plate in vocal group), so that changing group volume does not affect the Wet/Dry balance, and use group (or even groups inside the group) to control my levels. Is there any way of using groups and VCAs together to have group dynamic processing AND VCA send control? Thanks.
@LeThanhTamMusic
Жыл бұрын
Hi, I and many other users (as I researched) are facing the bug: Linked tracks to VCA changed their fader weirdly every time we re-open the project. It happens if we have some automation node for the VCA track. Do you have any suggestion to deal with this? Thank you.
@urarassolov8560
5 жыл бұрын
Спасибо!
@aleverkuhn
7 жыл бұрын
Thanks!
@bharathj63
3 жыл бұрын
Anyway to use a VCA spill type workflow with VCAs? Using a CC121 or something similar.
@timharrisonmusic
2 жыл бұрын
The "listen" function in the control room doesn't work to listen to effects only...using VCA faders...is this an issue?
@gerkirschbaum
6 жыл бұрын
So, I finally get what VCA faders do. But now I feel like linking is kinda useless. Is it really just for quick use, or are there more differences to VCA faders that I missed?
@JohnChandler2006
6 жыл бұрын
Okay.....is there a way to use the faders in a live performance situation? For example....using Cubase for church worship instead of using Ableton live or Main stage? Each fader being for each instruments volume. And all instruments played simultaneously. The faders to control/blend thr volume of each?
@FRANKRICECOLD209
6 жыл бұрын
Hay another Question Are is The NOISE GATE in Cubase 9.5 / Audio / Process /Noise Gate / Please Don't Tell Me They Got Rid of it That Function That Was Huge For Processing My Vocals
@michelesquarcia6756
5 жыл бұрын
Just a question... if you are there. If I have a group of tracks assigned to a group channel and I want to control these tracks with a VCA fader. Should I also assign the group channel in question to the VCA fader?
@AsesorMusical
4 жыл бұрын
Depending on your objectives, I guess you could do both. If you need to set an absolute level "ceiling" to the linked channels, then you might want to not assign the group to the VCA. I mostly use VCAs to create layered automation, and if it becomes necessary to control the overall level of that automation, then assigning the linked channels' outputs to a group. In this scenario, you want the group to be independent of the VCA.
@DHOTS2007
5 жыл бұрын
is it possible steinberg to just compile these whole tutorials so we can download all the vids without having to online all the time ?
@2009Tosh
3 жыл бұрын
You are selecting tracks that are NOT adjacent to each other to make some groups... HOW? I only seem able to select adjacent ones.
@DEADLINETV
7 жыл бұрын
OK, now that's all great and all, but what if I made a fade out automation from, let's say, -6db to infinity but the -6db is too loud. How, except for point dragging, adjust this? Or is point dragging the only way?
@Cubase
7 жыл бұрын
Hello, at the moment point dragging is the only way to go, or enable write mode and re-do your automation again.
@DEADLINETV
7 жыл бұрын
Good to know! I'm glad I didn't miss anything!
@kaptainkrunch3486
5 жыл бұрын
Aww.. another feature that is Pro only :~(. I wish I could afford it.
Пікірлер: 38