If you're interested in following me further, feel free to check out my gaming channel: / @lamentersgaol
Here's how I modded my Xbox One S from start to finish. This isn't a comprehensive list of mods that are possible, but I feel like they are the most likely ones for a person to want to do. Below is a list of all the tools and materials I used to achieve these effects. The green screws, as well as the screws holding on the power button and wifi PCBs are two difference sizes of Torx security screws. You'll most likely need a small philips head screwdriver for your LED strip, and I used a large flat head screw driver to pry the case apart but you can use anything that will act as a small pry bar.
And here's a more detailed explanation of working with acrylic:
• PC modding basics: Wor...
Tool/material list (These are affiliate links):
Xbox One S: amzn.to/2nFUsM9
Torx security screwdriver set: amzn.to/2nAtOYc
Red LEDs I used: amzn.to/2nAzGRb
LED wall adapter: amzn.to/2mhligN
Sandpaper: amzn.to/2nAuKvG
Acrylic cement: amzn.to/2m4T7xW
3M mounting tape: amzn.to/2lYZAxn
3mm thick cast acrylic: amzn.to/2lxAbdg
xacto knife: amzn.to/2kXSDs9
Vinyl sheets: amzn.to/2mhvaXL
Vinyl transfer paper: amzn.to/2kY1Qkb
Dremel moto saw: amzn.to/2lGzs5D
Cheap jigsaw: amzn.to/2mhqqBc
Frog Tape (good masking tape): amzn.to/2novX98
Silhouette Portrait vinyl cutter: amzn.to/2n413BJ
Rustoleum enamel primer: amzn.to/2lALm55
Rustoleum enamel black: amzn.to/2kCpnLC
(I only link black but there is any color)
Rustoleum clear coat: amzn.to/2kCvWO8
My socials!
/ dietecmods
/ dietecmods
/ dietecmods
/ dietecmods
Music used:
Cloudkicker - Welcome back
Cloudkicker - Let yourself be huge
Cloudkicker - This isn't
cloudkickermusic.com/
/ cioudkicker
Негізгі бет Ғылым және технология How to mod your Xbox One S!
Пікірлер: 626