How about placement of the struts? That is the hard part, correct?
@skimmerstudio1193
4 жыл бұрын
we already know HOW they work. we want to know the specifics of HOW TO INSTALL.
@SuperTarutung
4 жыл бұрын
Thank you for the good explanation video. The mounting of gas spring should always be mounted piston rod downwards to ensure proper lubrication of the main seal also the extension velocity is reduced so the end position is damped hydraulically.
@bbwolf9925
4 жыл бұрын
How does anybody watch this and then complain that it gave no information? It told me something I did not know which will be central to the successful operation of the gas pistons I am about to install: Mount the piston end down with the cylinder end up. If you need to be told how to screw the strut at each end to the door and cabinet (or whatever) then should you be let loose on your own with sharp tools near expensive equipment? Probably not.
@janlexserrano1616
8 ай бұрын
exactly!
@tunafish3216
3 жыл бұрын
This didn’t show how to install a the gas piston WTF ?
@AndrewLale
5 жыл бұрын
No actual information. Complete waste of time.
@daseiner
4 жыл бұрын
Seems like it provides one very useful piece of information -- which orientation to use when mounting the gas spring
@0AlphaC0
4 жыл бұрын
In the installation instructions of a gas spring that I just bought, it says to install it with the piston rod facing upwards. Which way is correct, upwards or downwards?
@aalmanzaaaa
3 жыл бұрын
Rod down, so that it keeps the oil at the bottom and (i) dampens the fully-open position of whatever you are attaching it to, and (ii) lubricates and seals the strut, which will make it last much longer.
@robertdwyer9243
2 жыл бұрын
Gas springs from STABILUS INOX, usually sold by Attwood, have retainer clips in the heads that can come out and get lost. Stabilus does not supply replacements! These are the clips that you must compress using needle-nose plyers in order to remove the spring from the nub. Very irritating when you've lost the darn clip!
@riddlehawk9139
Жыл бұрын
Thx! Many viewers failed to see the point of the video.
@Gasspringscn
2 жыл бұрын
I'm here, thanks for the video.
@jayclu6995
5 жыл бұрын
It simply demonstrates difference when mounting cylinder to door or cabinet, the second way demonstrated being correct
@markwelch1143
5 жыл бұрын
It says how to mount, but no information how to mount
@watha2277
4 жыл бұрын
Thank you for doing this video. If the weight of my flap door is 40kg., and I want to use 2 struts, shoud I use each strut with max. load of 20kg?
@jerchlau3545
6 жыл бұрын
Whaaatttt? Is that how to mount a gas strut? Its an animation how a cylinder gas struts works....
@amadaguerrero7048
3 жыл бұрын
Endonde lo compraste.gracias
@bipinkumarkanojiay5868
4 жыл бұрын
Very very nice
@TheBoxingdude
6 жыл бұрын
Nice music
@eddennis01
6 жыл бұрын
Lousy video, no instructions as to how to install.
Пікірлер: 28