Looking to improve your race pace even more? - I've released the GitGud Course, the most practical sim course with detailed practice drills and approaches for getting quicker. Link: gitgudracing.com/simracingcourse/
@bananasnsushi
7 ай бұрын
Can you make a video showing how you actually configure them in the software to do what you want within the sim?
@darrenalmodiel4291
2 ай бұрын
Ordered them last week, thanks for the tips
@strovich
8 ай бұрын
I have the Heusinkvelds too and the haptic reactor is on my list. Was maybe going to get the 3d printed etsy marketplace mount
@GitGudRacing
8 ай бұрын
Thats also an alternative! If you do it add a comment with your feedback, it will be greatly appreciated!
@strovich
8 ай бұрын
@@GitGudRacing definitely! It may be a couple months down the line here
@arnaudontrack499
7 ай бұрын
Hello, i would be happy to know how to mount the haptic on the sprint. There is only one transversal screw at the rear of the pedal so it's not possible to mount the haptic like you do on the ultimate
@T4CTIC4L_G4M3R
2 ай бұрын
Yeah absolutely do not do this, without locktite the 2 small m3 bolts in the bracket back out of the threads with only 75% shakeIt Motors settings, then with locktite those bolts just snap. Ask me how I found that out 😐
@LarryMcDonald08
4 ай бұрын
Did you ever get a chance to make a video and share your settings like you mentioned doing in the video above?
@spamcatchington1771
6 ай бұрын
Interesting mounting method. I'd worry about transferring all that load and vibration on just the 2 small bracket screws. Any thoughts? Id like to get a pair, one to signal ABS and the other to signal TC activation.
@JayKBra
2 ай бұрын
Thanks so much!!!!
@sskhaliq
Ай бұрын
Thank you for the video. Does it work with fanatec load cells also?
@walterswdf2
4 ай бұрын
Assuming I can mount it, should the haptic motor work with my Fanatec CSL load cell brake?
@strovich
8 ай бұрын
Not too shabby. the one bolt method, you dont think it will slowly slip down over time hey?
@GitGudRacing
8 ай бұрын
Will keep an eye on them! So far so good!
@rickyquanjr.8923
5 ай бұрын
@@GitGudRacingany issue 3 months later mounting with one screw?
@GitGudRacing
5 ай бұрын
@rickyquanjr.8923 nope, all good!
@br4nd0n79
8 ай бұрын
How are you liking them? Thinking about throttle an brake. Thinking that the ABS feedback would be invaluable. Hope your diggin them.
@GitGudRacing
8 ай бұрын
I love them. It's not a huge change, but small things add up. Paired up with buttkickers and good FFB from the steering wheel, the immersion is quite awesome. In terms of ABS feel, it's instant - but I have to play more with the settings, since I have to test them more in terms of actually gaining a competitive advantage with them.
@TheZoinxtorque
7 ай бұрын
Chiar sunt curios de kikerele astea...!! Am scăpat filmulețul acum îl văd...!! Am ceva custom cu un alt tip de kiker pe VRS doar brake...dar nus daca e așa de eficient că astea...!!
@GitGudRacing
7 ай бұрын
Au putere mare astea. Vibreaza bine
@chowholim3346
8 ай бұрын
Do you think it will fit on BJ Loadcell pedals with this way? I'm thinking to get one, I worried it not gonna fit.
@GitGudRacing
8 ай бұрын
I think it will. You might have to use a larger washer for the screw to mount them. But looking at their profile, it should work mate.
@strovich
8 ай бұрын
Also what is the advantage of having 2 haptic reactors compared to 1 haptic reactor only on the brake pedal?
@GitGudRacing
8 ай бұрын
Well, you get a bit more feedback and immersion. I think its worth it. In terms of performance and competitive advantage, theres a different discussion. Will cover it in a video soon, but so far for me they re better more for fun and immersion rather than making me quicker.
@strovich
8 ай бұрын
@@GitGudRacing for sure! What do you prefer. ABS on one? TC on the other? And formula racing, no abs, what goes on the brake?
@GitGudRacing
8 ай бұрын
I'm still constantly experiencing! I tried a lot of things, but havent decided on what to use haha@@strovich
@strovich
8 ай бұрын
Looking forward to the final result @@GitGudRacing
@andypang6416
8 ай бұрын
Have configured mine in simhub with the Wheels lock for the Brake on the fronts, and the Wheels slip for the throttle on the Rears. Open to more options to see which is best. @@strovich
@WittyGooseRacing
6 ай бұрын
Venym Atrax possible ?
@KeynSong
3 ай бұрын
Did you have any firmware issues?
@GitGudRacing
3 ай бұрын
No, all good
@fakhriabdul1
6 ай бұрын
how many usb a to usb cable do i need for 2 motors?
@GitGudRacing
6 ай бұрын
Oke for thr control box
@ricaldrich3424
4 ай бұрын
I would love to get the pedal haptics. But they have the most convoluted website in the history of the internet. FFS customer service is NOT a link to a Discord page. I thought chat bots were a joke that would be so much better than a Discord page. I'm not counting on ANY support from this company
@wdodoo4707
3 ай бұрын
You shouldn’t buy from their official website anyway. It’s recommended to buy from a reseller when you want products from companies like Siamgic/moza.
@wdodoo4707
3 ай бұрын
You will get great customer service from a reseller, for example Sim Motion responds super quickly and are super helpful.
@jaycray
5 ай бұрын
This is wrong the boots doesn’t fit on the original as you’d need a longer one. You didn’t disclosed that
@LarryMcDonald08
3 ай бұрын
What do you mean the boots doesn’t fit? What boot? Mine are do here tomorrow and plan to get it set up right away so if I need something else I’ll order it.
@gabrielcsik2712
5 ай бұрын
Are you from europe? Can you order from their site to europe? If yes how much did you wait
@GitGudRacing
5 ай бұрын
Yes, I'm from EU. It took around 1-2 weeks for the package to arrive.
@gabrielcsik2712
5 ай бұрын
did you pay any fees that it came from USA?@@GitGudRacing
Пікірлер: 43