How to remove audio noise in DaVinci Resolve kzitem.info/news/bejne/moCDrISws2KAfX4
@BarrytheCuda
Жыл бұрын
Wow! That was professional. Thank you, sir. Finally somebody explained scientifically the audio part.
@pawelmakesyoutube
Жыл бұрын
Thanks!
@WernersWhirligigs
Ай бұрын
That was very helpful. I had no idea how to raise the audio levels in my videos, except with audio tab, and you got me pointed in the right direction. Thank you!
@twinn61661
11 ай бұрын
Subbed! You are the first KZitemr to help me fix my quiet KZitem videos. Your video is straight to the point with no fluff! Excellent my friend!
@pinchetech
5 ай бұрын
Best tutorial. Simple and straight to the point. Finally I undertand and can make a good video with good audio. Many thanks.
@pawelmakesyoutube
5 ай бұрын
you are welcome! Happy filming!
@worthowaste
Жыл бұрын
Please do a video using voice over, music and sound effects to -14 lufs
@killierast
10 ай бұрын
Thank you very much!!! I've been looking for this for days... No one explained better than you bro! keep it up!
@pawelmakesyoutube
10 ай бұрын
and now you found it :)
@pupstudio
3 ай бұрын
Thanks Pawel ! I found no problems understanding you, (US here) and have worked with audio for years! However, you did teach me some things on how to use DAVINCI loudness meter. SUB’ d and liked. Will check more of yours!
@kravitz_mark85
11 күн бұрын
Good job bratko! :)) Greetings from Serbia and thanks! ;) Marko😀
@lonr373
Жыл бұрын
Wow, this is incredible! I don't think I've seen any other KZitemr go into such depth of information. Thank you! Playing back my video after these edits felt like a goddamn magic trick. It's so much better than just normalizing everything on the edit page. The highs were reduced, and the lows were increased! Now it all sounds top-tier. Thank you, thank you, thank you! You're right about the loud audio thing. I didn't even notice that you only had 368 subs. I thought you were in the hundreds of thousands of subs just from the aura of confidence a loud voice exudes.
@pawelmakesyoutube
Жыл бұрын
I'm glad you like it! I think I wil have to go deeper into the topic soon
@lonr373
Жыл бұрын
@@pawelmakesyoutube that would great thanks!
@thinktank13
9 ай бұрын
Nice to find you again! I've been watching your drone coverage for a long time, but my first love has always been film making. So here I am. Subbed!
@pawelmakesyoutube
9 ай бұрын
thanks! I also wanted to make films. I suck at it but at least its affordable
@stehume
Жыл бұрын
What you could have included is going to the settings then the fairlight tab and setting the lufs to -14, that way you could have had them automatically change colour depending when correct or not, also could have added the main tack so that it shows history again by colour. very good video tho
@joelflescher7634
Жыл бұрын
Thank's Pavel ! Your video is perfect and easy to understand !Congrats !
@pawelmakesyoutube
Жыл бұрын
Thanks! And happy you like it!
@JonGibbsPhotography
7 ай бұрын
Pawel. Thanks. This has been a huge help. I do photography vlogs on location so sound can be difficult but this has helped immensely.
@pawelmakesyoutube
7 ай бұрын
Nice! Glad I could help!
@valentynachanguli4207
4 ай бұрын
Thanks a lot!! The only video that helped setting correct audio levels 😅
@pawelmakesyoutube
4 ай бұрын
You are welcome! Happy filming
@prinzzeed
10 ай бұрын
In Germany we say "Ehrenmann" (Man of Honor) thx sir
@pawelmakesyoutube
9 ай бұрын
you are welcome
@flirtempire
Жыл бұрын
good video bro! nice explanation of the compressor and also the tipp with bs.1770 is great!
@pawelmakesyoutube
Жыл бұрын
Cool, glad you like it!
@PaulBSimpsonJr
Жыл бұрын
Thank you so much for making this so simple to understand. 🙏🏼
@pawelmakesyoutube
Жыл бұрын
My pleasure
@ShiromaniKant
11 ай бұрын
Wow!! very useful brother. Just subscribed.
@pawelmakesyoutube
11 ай бұрын
thank you brother!
@vedovelli
Жыл бұрын
Thank you Pawel! I am also using Resolve and it is one of the best software I've used in the past decade!
@pawelmakesyoutube
Жыл бұрын
My pleasure Fabio
@officialpurplexxer
Жыл бұрын
When I set my Integration to -14 my music/sound is actually getting quieter. Please help thank you! :D
@DamianNowaczykDJDamian
9 ай бұрын
Dziekuje pomocny materiał 2 lata o tym nie wiedziałem.
@pawelmakesyoutube
9 ай бұрын
Ja w sumie więcej, a robię filmy na YT od 2017 :)
@zoomoutzoomin1000
Жыл бұрын
I photographed performances of singers on stage. I recorded the sound directly from the console amplification system. With Tascam DR-40X. And I edit in DAVINCI RESOLVE during the performance I get stereoTwo tracks. But in the sound recording device, it is on dual. One is high volume and the other is limited to minus 12. Then after recording, if everything is fine, I use only the high volume.Tell me Please if this is how it should be. You are a professional. When recording sound from a console of a singer's performance. What should be the limit when recording sound from the board? Minus 6- Minus 3 Minus 12 DB or other? And what should the sound limit be during video editing minus 6 DB, minus 3 DB or other? Thanks
@Daltonnwith2ns
Ай бұрын
Great video! I do have a question though. I am fairly new to this so I may have a misunderstanding. I understand the solutions of compression and raising audio levels, but I notice in your video that this makes the decibel levels jump way up in the red. Is this normal or is there supposed to be a balance with loudness and decibels. Because I thought there was always an understanding that you want to keep your audio bars in the yellow, at least for vocal dialogue. Again thanks for the video :)
@symfonik-pl
4 ай бұрын
Super video Paweł. Samo mięso :) Pozdrawiam i biorę suba :) Fajny kanał!
@pawelmakesyoutube
4 ай бұрын
mięso jest najlepsze. Dzięki!
@PlayOfLifeOfficial
Ай бұрын
I think you Forgot to show the part where in the settings the fairlight target needs to be set to 14
@mr.bigmangames
Жыл бұрын
Make a tutorial how to blend in a Voice over into the origianl video. I Do VO of funny game sketches and my audio sounds like its something sepparate from the video and i cant understand how to make it blend with original video sound so that it sounds like it was there originaly
@lovinmanager8296
Жыл бұрын
I am confused. You didn't check the "lock metering to transport" in this video but you told us to enable it..
@MCsCreations
Жыл бұрын
Fantastic tips, Pawel! Thanks a bunch! 😃 For me, the most difficult part of editing videos is to cut my errors and "hmmm...", "err..." and so on. 😂 Anyway, stay safe there with your family! 🖖😊
@johnhpalmer6098
Жыл бұрын
Yep... Spent an inordinate amount of time doing just that in a video that ended up with lots of tiny clips that were in many cases frames long or seconds long.
@alexstoermer
11 ай бұрын
Thank you for the excellent video Pawel, new subscriber here as a result.
@pawelmakesyoutube
11 ай бұрын
nice, thanks a lot!
@jayjayoutre21
Жыл бұрын
I think your message has present value however my thoughts are that you have a very slow intro as well as what I believe to be a strong accent that is adding to a communication barrier that I believe would not exist if the intro to this video was not as slow and extremely dry. You do a very good job of teaching and do not stretch the content at all. Keep striving to be the best you and I'm sure I'll be back for some more tips.
@VikashAnalytics
Жыл бұрын
Thank you so much! This is great for a beginner like me to follow and apply to my own videos. However, maybe followups to go deeper into this topic would be great. For the taget audience "youtube creator": What are the main things I need to focus on while editing my audio and maybe what are all the scary buttons on the fairlight page for? Thanks again. Great video and super helpful
@plivkovyy
6 ай бұрын
Дуже дякую!
@pawelmakesyoutube
6 ай бұрын
You are welcome!
@VeeTravels
11 ай бұрын
Pawel, thanks so much for the detailed explanation. May I ask if my current videos have their audio levels set correctly? They are intended to record ambient noise as part of a virtual walk tour and as a result the content loudness is usually around -25dB. I am not sure if this is too quiet.
@Francescofilmmaker
Жыл бұрын
GREAT VIDEO thank you you saved my ass today!
@pawelmakesyoutube
Жыл бұрын
Cool! Glad I could help!
@IKcodeIgorWnek
5 ай бұрын
Great video, thanks Pawel!
@ImaginArt24
6 ай бұрын
what do you do if someone's audio is all over the place i could and do level out the audio lets say there are two sections of his audio ones loud ones to quiet i have to split its and fix it manually it takes way too long to do this i need advice
@Cycling-in-Delft
Жыл бұрын
Thank you sir, I subscribed and liked the video
@pawelmakesyoutube
Жыл бұрын
Nice! I'm glad that you liked it
@lorenam.4476
11 ай бұрын
Thank you Pawel! such a great content!👍
@pawelmakesyoutube
11 ай бұрын
Thanks!
@LaberLabor
9 ай бұрын
This helped me a lot, thank you.
@pawelmakesyoutube
9 ай бұрын
nice!
@BIGSHOT_1997
Ай бұрын
спасибо огромное!
@Cubasenet33
Жыл бұрын
A great thank you. Best explanation ever!
@pawelmakesyoutube
Жыл бұрын
my pleasure!
@skellam8010
10 ай бұрын
Great video. Very informative.
@pawelmakesyoutube
10 ай бұрын
Thanks
@TonyFernandezjkdjedi
4 ай бұрын
Nice video
@pawelmakesyoutube
4 ай бұрын
Thanks! Happy filming1
@GamingForTheRecentlyDeceased
Жыл бұрын
Ive watched about 10 videos about this and this was the only one that made sense. great work. Im still struggling to get my audio to -14 lufs and TP to -2, how do I get them more inline with KZitem standards?
@pawelmakesyoutube
Жыл бұрын
Thanks. adding more compression and a limiter helps. But to be honest, as long as you are not clipping, going even down to -16LUTs will be fine
@joyoffilming9500
9 ай бұрын
Awesome tutorial!
@pawelmakesyoutube
9 ай бұрын
Thanks
@SpiffyGiraffeCreations
Жыл бұрын
Thank you! You earned another sub.
@pawelmakesyoutube
Жыл бұрын
Thanks!
@chi-plays
Жыл бұрын
How would you approach measuring loudness if the content is 1 hour long? Going over it like this is for that type of content undoable.
@pawelmakesyoutube
Жыл бұрын
That really depends on type of content. If you have like 1h inerview filmed in stable conditions, loudness will be also constant. So if you measure like 30 seconds it should be fine. If you have a lot of clips recorded in different conditions, you have set loudness of each one separately
@SodaPancake
Жыл бұрын
What's the difference between using this method and by just add a limiter effect (under Dynamic tab). Is there any difference in voice quality on KZitem? because compressor method sounds like it'll take longer than just simply using limiter effect (with "soft" gain on) to gain the same loudness.
@pawelmakesyoutube
Жыл бұрын
Limiter is just a compressor with much more aggressive setting. And Even if you set a limiter at -15dB, peaks will go well above it either way
@sergeypasternachenko3901
Жыл бұрын
Thanks!!! It's very useful!!!!
@pawelmakesyoutube
Жыл бұрын
Glad you liked it!
@michaelshotit
Жыл бұрын
Great video!
@pawelmakesyoutube
Жыл бұрын
thank you!
@thomasgarcia871
Жыл бұрын
Hola, saber cómo normalizar el loudness para salas de cine? Gracias por compartir. 😊
@marsbog_tv
3 ай бұрын
"TO be more efficient when you have countless of hours & hours footage to sort out what to use & what not."
@liamjamesgames
Жыл бұрын
hi! this is a great video and has improved my audio, however it says it is peaking in the little mixer at the side? is this okay?
@pawelmakesyoutube
Жыл бұрын
It shows peaks, not loudness. And since we target with peaks into -1.5dB, it will go into red for sure
@liamjamesgames
Жыл бұрын
@@pawelmakesyoutube this is awesome! Thank you for replying and I would love to see more davinci resolve videos from you in the future. Got a sub from me!
@Alluvian567
Жыл бұрын
I have a piece of crap mic and doing this didn't help me with my peaks blowing out upwards of +5db, I don't understand how to use the limiter apparently, it was not helping much at all, even going crazy and doing a 20-1 ratio wasn't killing those peaks.
@pawelmakesyoutube
Жыл бұрын
You will not fix a crap mic in post production. Invest in a good mic instead
Unfortunately music making is not my thing. But OK, I can make a few more tutorials on how to use Fairlight in Davinci resolve
@ArtDronHobby
Жыл бұрын
zajebiste porady
@pawelmakesyoutube
Жыл бұрын
dzięki. Muszę nagrać tochę więcej z tego działu jak znajdę trochę czasu
@drfunkmaster
Жыл бұрын
color gradiing is the hardest
@pawelmakesyoutube
Жыл бұрын
Well, depends on what you want to achieve. If input material is ok, then it's simple as well
@FLASHAHOLIC_TV
Жыл бұрын
Motion tracking is!
@FLASHAHOLIC_TV
Жыл бұрын
My channel audio is lower than my morals
@pawelmakesyoutube
Жыл бұрын
How to record better audio? kzitem.info/news/bejne/pJp603uGsX9-qG0
@Tuskabanana
9 ай бұрын
hi nice video, i have a question about the limiter, if i have 14 luf max audio level on the fairlight settings, can i bumb up the limiter audio gain over plus 10, so i get yellow on the whole video, is it ok if it hits red target like -10 if we got 14 luf limit anyways :O? best regards
@pawelmakesyoutube
Жыл бұрын
Simple! How to change framerate in DaVinci Resolve? kzitem.info/news/bejne/uGiD1GGpa6icdHY
Пікірлер: 106