This was sooooo helpful thank you!!! I messed up almost every piece of information you gave but still was able to get it replaced and running again
@garrymullins
6 ай бұрын
Bro you got this down. Really good use of the PVC and your press.
@KaizenOz
2 жыл бұрын
I like the PVC protecting the magnets
@ejectmedia
2 жыл бұрын
Just did my very first bearing change thanks to this video (plus some pointers from other videos) and holy crap, what a difference upgraded bearings make.
@carvecreative
2 жыл бұрын
Thanks for checking it out! Glad we could help. Nothing better than the first smooth ride after riding on crunchy bearings!
@rayswiney7398
9 ай бұрын
Very concise straight forward video. No bullshit music, no theatrics. Great explanation . Wheres your shop?
@phunkkpunk
2 жыл бұрын
Such a brilliantly explained video, this will definitely help anyone looking to change their bearings or even do a tire swap. Excellent work Carve Creative.
@carvecreative
2 жыл бұрын
Thank you! We appreciate you checking it out!
@tylerd44
2 жыл бұрын
Could y'all make a tire change video in prep for the Enduro that's coming?🙏🏻
@carvecreative
2 жыл бұрын
Sure!!
@RickLeon7
2 жыл бұрын
Well done 🔧
@carvecreative
2 жыл бұрын
Thanks Rick!
@MajBurke
2 жыл бұрын
great video! Definitely keeping this bookmarked for the future bearing change.
@carvecreative
2 жыл бұрын
Thanks for checking it out!
@morganrogers95
2 жыл бұрын
You da man Kyle!!
@carvecreative
2 жыл бұрын
Mike crushed it with the camera skills!
@ziggiex
2 жыл бұрын
Solid video!! Not a lot of bearing change videos out there.. I have a milled out XR hub on the way! Can’t wait to get back on a 6 inch hub! GTR time baby!
@carvecreative
2 жыл бұрын
Thanks Mathew! Let us know how you like your conversion!
@Yielar1
2 жыл бұрын
Where did you get your milled out XR hub?
@indiemoto
2 жыл бұрын
Dayum y’all… Freaking killed this!
@carvecreative
2 жыл бұрын
Thanks homie
@MatthewLiguori
2 жыл бұрын
Next level as always
@carvecreative
2 жыл бұрын
Thanks Matt! Would love to ride with you this summer sometime!
@SeanPaulNotTheSinger
2 жыл бұрын
Great video, thank you. Were you going to link the tools you used?
@redboyjan
2 жыл бұрын
Hahahahaha love it. How to de-FM your board is in full effect yet again hahaha
@carvecreative
2 жыл бұрын
😬
@redboyjan
2 жыл бұрын
@@carvecreative I absolutely love it. Huge innovation straight out the traps! Onewheel is in safe hands imo
@craigkovatch7564
2 жыл бұрын
What a great video!!!!
@carvecreative
2 жыл бұрын
Thanks Craig!
@thirdeyesamuel886
2 жыл бұрын
Superior video as usual, ty brother! 🙏🏻🤙🏼🐉
@carvecreative
2 жыл бұрын
Thank you sir!
@mlastudioproductions
2 жыл бұрын
What diameter size and length of pvc pipe did you use to avoid magnets from gravitating towards the press? Also, will a 35mm diameter piece of metal work for pressing the old bearings out of the hub or can one use between 35mm-55mm diameter metal object?
@carvecreative
Жыл бұрын
3” coupling!
@onewheelwanderer
10 ай бұрын
Well made
@djd7421
2 жыл бұрын
Excellent video!
@carvecreative
2 жыл бұрын
Thanks DJ!
@187kenny
Жыл бұрын
Nice vid....any word on where to get replacement o-rings or the size of the o-rings needs???
@diegorocha7952
2 ай бұрын
Hello. Thank you for the lovely info. Where can I buy that press and the tool you are using with it?
@michaelleighton31941
2 жыл бұрын
Great video, looking to change to the grizzly bearings TFL has
@carvecreative
2 жыл бұрын
Cool!
@Tanner463
2 жыл бұрын
hi, how did the locking ring on the motor plug feel? mine feels a Little lose but it still clicks in. I am trying to see if this is an issue
@carvecreative
2 жыл бұрын
It wasn’t very loose for me. It was pretty standard and comparable to the pint motor plug
@Tanner463
2 жыл бұрын
Update I’m setting my board back to FM. thank you for responding. Mine was so loose that I can’t even feel a click at all. But I compared it to my pint and my pint felt normal So you said your GT feels like the pint. If so when I get it back from FM I will compare it to the pint again. 😄😄😄
@Yielar1
2 жыл бұрын
Have you tried swapping the XR hub onto the GT yet? I've noticed a few other people have done it and think that would be a cool video
@carvecreative
2 жыл бұрын
Hoping to do that soon!
@chrisc790
2 жыл бұрын
Did you do a range test before changing the bearings? Would be cool to see if there is a difference in mileage.
@carvecreative
2 жыл бұрын
Not yet! This was 2 days ago and yesterday it was snowing. Planning to take it out tonight and tomorrow!
@indiemoto
2 жыл бұрын
I was thinking the same thing! Would be awesome to know how much extra mileage
@redboyjan
2 жыл бұрын
Varies with FM bearings. You only need one bad one in two sets and its dogshit early. Other times you can get daft miles on stock bearings. Like everything it's like a roulette table to a good board or not with FM always
@carvecreative
2 жыл бұрын
@@redboyjan I remember on my XR after changing my bearings and breaking them in I had about 1 extra mile than my average. The stock ones weren’t bad either. I’m interested to see if it’s any better this time around.
@carvecreative
2 жыл бұрын
Sorry I read that wrong yes we did do a range test! Onewheel GT Range Test/Sensor pad PSA! kzitem.info/news/bejne/xZBt0p6BcqqXqKw
@MQT.Onewheel
Жыл бұрын
Have you needed to replace the Stator o-ring on the GT ? How big is that?
@OverExposedPixels
2 жыл бұрын
Yo, I would love to get some fresh bearings on my GT! Where you guys located?!
@carvecreative
2 жыл бұрын
West Bend,WI
@larrytolson4135
2 жыл бұрын
Is that a 2 or 3 ton press?
@carvecreative
2 жыл бұрын
3 ton.
@wantedfel0n385
2 жыл бұрын
Is it necessary to remove the rail? Couldn’t you just remove the fender and front bumper, unplug, remove hub bolts and done?
@carvecreative
2 жыл бұрын
That’s one way to do it. Removing the rail makes it easier to properly unplug/plug in the connectors. Many people ruined pint stators not plugging it in correctly. With the rail off you can make sure it’s right.
@Yielar1
2 жыл бұрын
What's that DeWalt screwdriver called? Haven't seen that unit yet and I like the idea of not having to change to forward and reverse all the time..
@carvecreative
2 жыл бұрын
DEWALT 8V MAX Cordless Screwdriver Kit, Gyroscopic, 1 Battery, Electric (DCF682N1), Black www.amazon.com/dp/B011WRUODC/ref=cm_sw_r_cp_api_i_0A8KX875Z0X67FD118ZM
@joelsummers8746
2 жыл бұрын
Where did you get your Ribe M8? Great video by the way!!!
@TheAnimeist
2 жыл бұрын
Are one of the keys, not to disconnect the battery from the controller?
@dingalsbe88
Жыл бұрын
Nice Billy Strings hat…
@carvecreative
Жыл бұрын
Thanks man! He’s awesome
@laurentbeauregard4666
2 жыл бұрын
Can you explain why I’m dumb and didn’t get the hub side seated correctly? I need to machine down the seating ring now, any suggestions?
@carvecreative
2 жыл бұрын
You need to be very careful when pressing them and make sure you’re even by applying pressure
@carvecreative
2 жыл бұрын
I wouldn’t machine that down unless you’re absolutely positive it’s not even
@craigkovatch7564
2 жыл бұрын
14:40 what torque values are you using?
@carvecreative
2 жыл бұрын
18.5 ft/lbs !
@craigkovatch7564
2 жыл бұрын
@@carvecreative Immediately after watching this video, I drove to a Home Depot a half hour away to buy the only one of that DeWalt screwdriver I could find 😂
@kylecarson6573
2 жыл бұрын
Great video. Wish I had seen this before I started breaking down my GT. Do you know if there is a way to replace the stator motor cable? The small plastic tooth inside broke off and now the cable won’t reconnect. Have not heard anything back from FM yet and just trying to see if there are options outside of buying a whole new motor assembly.
@carvecreative
2 жыл бұрын
Unfortunately those are proprietary parts. You would need to find someone selling a GT stator to splice in a new connector..
@Saguarobum
2 жыл бұрын
What type of bearings came stock on the GT? My OG 4206 XR has stock FAG bearings.
@carvecreative
2 жыл бұрын
Really?! That’s awesome! C&U is stock now. Nowhere near as good
@kwancolon
Жыл бұрын
For the arbor press what size is it exactly so I make sure I get one big enough.
@carvecreative
Жыл бұрын
3 ton 🤘🏻
@kwancolon
Жыл бұрын
@@carvecreative 🙇🏿♂️
@e5211
2 жыл бұрын
what was that torque setting at the end and why was it set to that?
@carvecreative
2 жыл бұрын
18.5 ft/lbs.
@MrJakefuller
2 жыл бұрын
Great video Kyle, super useful! What size (diameter and length) is the white PVC pipe you're using to protect the magnets?
@carvecreative
2 жыл бұрын
Thank you! That’s a 3” coupling in there
@MrJakefuller
2 жыл бұрын
@@carvecreative Awesome - Thank you!! I'm going to attempt my first bearing swap soon.
@norbelsemaj3870
2 жыл бұрын
I thought when you Take the Plug out. Your Board will be locked 🔒 (Only Future Motion Can Unlock the Board)
@OverExposedPixels
2 жыл бұрын
He only took off the footpad and the hub motor plugs. He didn’t disconnect the battery
@carvecreative
2 жыл бұрын
Yeah that only happens when you disconnect the battery from the BMS. Motor plug is all goooooood
@norbelsemaj3870
2 жыл бұрын
Oh I see. Thanks.
@yevnovo1
2 жыл бұрын
Great Video! Where could I find a 55mm metal die to press the new bearing?
@carvecreative
2 жыл бұрын
I bought this kit and it had the die…OrionMotorTech 23-Piece FWD Front... www.amazon.com/dp/B01FLVOAZI?ref=ppx_pop_mob_ap_share
@shreddy3447
2 жыл бұрын
@@carvecreative what's the size of the metal die you used to press in the bearing?
@FirstWeRide
Жыл бұрын
Hey guys, could you let me know which bearings specifically you used in this video? My GT bearings are 'gritty' need to replace them before they cause issues...
These are my favorite! I’ve never had one fail on me! Just make sure you get them installed with a proper arbor press!
@FirstWeRide
Жыл бұрын
@@carvecreative Thank you! I'm looking at a Klutch 2-ton Arbor press, I'll have to compare its dimensions with the wheel depth when I get a sec. Any drawback to using an H-Frame press instead?
@carvecreative
Жыл бұрын
@@FirstWeRide if you can find a 3 ton that’s ideal for onewheel hubs. The 2 should work but it’s a little bit small!
@carvecreative
Жыл бұрын
@@FirstWeRide yeah an h frame press is a lot easier to make a mistake with. You can build up so much pressure with those. That’s what I started with and it was ok but I was told I was very lucky I didn’t damage any bearings because of the hydraulic cylinder. It’s so much easier with an arbor style press. Goes in smoothly every time!
@RusticRaver
Жыл бұрын
Of course when you try this on a old onewheel XR it does not really work, I can't get that engine plate of by rocking it at all. Cool vid still but most cases will be changing on old onewheel with all real problems you might encounter, not so realistic.
@carvecreative
Жыл бұрын
There’s some tricks to remedy that. You can get some bearing pullers to slowly get that cover off safely. If you do this be sure to be mindful of the PCB on the stator. You don’t want the clamps from the pullers to damage the PCB
@jeremyrosenahagen4577
2 жыл бұрын
What lbs tq did u set the axle bolts to?
@carvecreative
2 жыл бұрын
18.5 ft lbs
@manfrombkk
2 жыл бұрын
Does this void your warranty? or does just taking one screw out void it :-)
@carvecreative
2 жыл бұрын
Nope!
@manfrombkk
2 жыл бұрын
@@carvecreative great!!
@justanotherfpv
2 жыл бұрын
why doesn’t this void but large hills will?
@coreytheecorey4056
2 жыл бұрын
Hey b I’m wondering if I can use the same size pvc, and process for the XR bearing change Also what bearing do you recommend best for 250lb rider Thanks for the video
@carvecreative
2 жыл бұрын
Yeah you sure can. That’s a 3” coupling
@carvecreative
2 жыл бұрын
The FAG Shaeffler bearings are my favorite. You can get them at www.bobsstokeshop.com/product-page/schaeffler-fag-deep-groove-stainless-bearings
@coreytheecorey4056
2 жыл бұрын
@@carvecreative thanks pimp you rule🤙🏾
@coreytheecorey4056
2 жыл бұрын
@@carvecreativeyo b I just looked those up and they are 150$…. That’s a lot Can you tell me the name of the stainless precision bearings and the ceramic If the stainless last much longer that might be enough reason to get them
@ur2fat4me
2 жыл бұрын
Hey there. I am wondering what torx bits the GT uses? I wanted to grab a set so I can use my drill. Thanks :)
@carvecreative
2 жыл бұрын
Tp25 is the main size. Hub bolts are Ribe #8
@jeremyrosenahagen4577
2 жыл бұрын
Do u have a link or info to Exactly what Arbor press u got?
@carvecreative
2 жыл бұрын
It’s not available anymore but it’s a 3 ton arbor press
Hey Kyle , for the arbor press. I currently have a one ton , do you recommend a 2 ton?
@carvecreative
2 жыл бұрын
I recommend a 3 ton. That’s what most shops are using with no issues
@michaelleighton31941
2 жыл бұрын
@@carvecreative thank you , I appreciate the response 👍🏻
@IIIredbawlzIII
Жыл бұрын
@@carvecreative great video. It’s given me the confidence to tackle a bearing change myself. You linked a lot of stuff, some of which I’ve purchased already. I’d love to get that same arbor press but you didn’t provide a link for it. Any chance you have one?
@joemcclinton
2 жыл бұрын
What did you torque the hub bolts to?
@carvecreative
2 жыл бұрын
18.5 ft lbs
@onewheel9004
2 жыл бұрын
Do you know what size the PVC coupling is?
@carvecreative
2 жыл бұрын
3”
@onewheel9004
2 жыл бұрын
@@carvecreative Thank you, do you know a good cheap arbor press to purchase?
@pimpmastafunk69
2 жыл бұрын
Anyone know what size bit you use on the XR deck screws?
@carvecreative
2 жыл бұрын
You mean the main screws? The ones that the footpads are?
@altkev
2 жыл бұрын
Focus depth is very shallow in many of your video shots. Not a good effect when trying to film content like this.
Пікірлер: 130