Well made, no questions left, I think. I’m still working on a C220 and there are many differences I could see. But for self-education there is nothing better than looking behind other C-series cameras. Thanks for sharing.
@IainCompton
2 жыл бұрын
Is this the same for other C-series bodies like the C3?
@wrldwar3
2 жыл бұрын
They are slightly different, I think. The process may not be exactly the same. I have not opened one of those to say for sure. You may want to see if the repair manual is available online.
@garygruber1452
Жыл бұрын
Mamiya is a Japanese camera so they use JIS screwdrivers, NOT phillips head. You can easily strip the screw head with the wrong tool.
@charlesvail2443
Жыл бұрын
Thanks for sharing. I intend to carefully clean & lube the mechanism in my C330 as it squeaks!
@MrFun800
10 ай бұрын
hello, great video! i have a question. my focussing knobs have a little play without any focussing. What do you think cause this? Maybe you know the answer. Thanks in advance.
@wrldwar3
10 ай бұрын
Hi, it is hard to say without inspecting the camera. It could be the gears or just a loose bult. Check to see if it does it while using each side individually.
@photomaster1
2 жыл бұрын
Very nice, I've been planning on replacing the bellows on my C220. I've found that getting the bellows is easy but the replacement part not so much... Thank you for taking the time to do this.
@waynelarsen3802
2 жыл бұрын
Great job on this process. Extra credit for doing the removal process on the other side panel!
@ulyssessegatto9759
3 жыл бұрын
Thank you for sharing .
@billf_etc
3 жыл бұрын
Great vid, thanks!
@frozenf8
2 жыл бұрын
Does your camera fire without film in it? Mine doesn’t, but when I load film, the side shutter works. However, the bottom shutter doesn’t work at all, it’s kind of loose. Do you think it can be fixed by opening the camera and having a look at the mechanism?
@wrldwar3
2 жыл бұрын
The camera will not fire without film. It only fire without film if you set it to multi-exposure mode. Also, make sure that the crank arm is in the right position, or it will not fire. If you remove the bottom plate, you should be able to see what is going on with your shutter button.
@jeremiahjohnson1513
7 ай бұрын
What about the black shutter switch on the side if it won't slide down to fire the shutter. There's a video on everything with this camera but for some reason, not one that addresses the problem of a stuck shutter button. The metal bar it is on appears to be stuck so it won't slide downward. I've looked at the side and there is a small spring in there but I can't see what's holding it up. Is there a fix for this? Thanks in advance for any advice.
@devonwarren5143
7 ай бұрын
Does the other shutter button work?
@jeremiahjohnson1513
7 ай бұрын
@@devonwarren5143 I think you mean the actual shutter switch that the button on the side pushes down on to trigger the shutter? If so, yes the shutter itself works fine if I bypass the black button on the side and manually depress the switch next to the lens. There's not another shutter button I can find.
@devonwarren5143
7 ай бұрын
@@jeremiahjohnson1513 are you trying to fire the camera with no film in it?
@jeremiahjohnson1513
7 ай бұрын
@@devonwarren5143 Yes, there is no film in it. Does it need film in it for the black button on the side to function? If so, that makes me feel kind of silly. lol
@devonwarren5143
7 ай бұрын
@jeremiahjohnson1513 Yes, the camera needs film in it to "dry fire" it if it is set to "SINGLE". Move the dial on the advance lever to "MULTI" to dry fire the camera.
Пікірлер: 25