Wow! I didn't know that these were not accessible. When I see these comic book cover sets in stores, I always assumed that you can open them up and take the figure out. Clearly you can open them up, but I think it would have been a better design if Funko didn't glue the cases shut and made the cases accessible. You risk damaging the case if one would want to take the figure out!
@maneitzme
10 ай бұрын
Samee until I just bought one today 😂
@jimmyvibes
Жыл бұрын
So weird how the Pops inside aren't accessible. Some of us like to look and feel them up close, not just display.
@PaintsOnA4Up
Жыл бұрын
Been looking at buying these and replacing the Funko and backing with other funkos and comics I’ve got. Your video has helped me a lot in finding out I don’t think it’s going to be possible. Thank you so much! Really appreciate it! :)
@jpbautista1926
2 жыл бұрын
I have a broken MCR case and I want to replace it. Good tutorial! Thanks! :)
@Corpus_Corvus
Жыл бұрын
I’ve got the same problem but unsure where I can buy more :(
@SushiFeverDream
5 ай бұрын
Master Funko Pop box opener 👑
@itsrampage
Жыл бұрын
W tut cheers
@boboburbur
2 жыл бұрын
Thank you! Appreciate you posting this!
@vicenteparra5018
2 жыл бұрын
Si you know if it’s possible to separate the funko from the black thing beneath it?
@hasbook7156
2 жыл бұрын
@@vicenteparra5018 It is but be advised that it is super glued so it can crack the bottom of the case. It also may need to be sanded down. What I actually have been doing is using An exacto knife to cut the figure off and then just gluing my custom onto it.
@vicenteparra5018
2 жыл бұрын
@@hasbook7156 Oh ok, thank you very much for doing this video!
@snazzy1532
2 жыл бұрын
Thank u finally found a video for it
@hasbook7156
2 жыл бұрын
You’re welcome! Sorry it’s not the best quality
@timearly5241
8 ай бұрын
Thanks! I was about to get my hammer.
@unbreakable_360
Жыл бұрын
My son just found the moon knight 08 comic cover on sale cause that pop was loose so let's see if this works 👍
@hasbook7156
Жыл бұрын
Good luck!
@realgamers472
Жыл бұрын
Does anyone know if they sell the acrylic box on it's own? I bought a Kingdom Hearts 1 Sora pop recently and it fell as I was trying to put it on the shelf and it got a crack on the side. I don't really care about the resale value or anything so I'm fine opening it and replacing the acrylic. I just want to fix the eyesore that is the crack
@hasbook7156
Жыл бұрын
I have quite a few if you want them. I had plans for them but have too many other projects. Shoot me an email grenvillenash@gmail.com
@sadboygreggy
6 ай бұрын
*So now is there a way to remove them from the black stand? Cuz I have a couple in my collection & that stand is just getting in the way off how I want to display them.*
@hasbook7156
6 ай бұрын
It’s tricky as some will pop right off but others can rip the plastic base. You could try a hair dryer or some sort of glue remover.
@sadboygreggy
6 ай бұрын
@@hasbook7156 *Okay yeah, the 2 that I have are on there pretty good. But thanks for the tip. I’ll try that out & see what happens. I’ll let ya know how it goes lol*
@JohnDoe-nl7sh
9 ай бұрын
Hey I have this but a different figure Just asking if it’s possible to remove the person from the stand?
@hasbook7156
9 ай бұрын
Yeah, all the figures are glued onto the base. Some pop (hehe) right off but others you may have to try and adhesive remover
@JohnDoe-nl7sh
9 ай бұрын
@@hasbook7156 Lol nice joke! Thanks for the help I appreciate it!
@viki7951
Жыл бұрын
Could the box be closed back?
@hasbook7156
Жыл бұрын
Yes it can. The top will come off easily as there is no adhesive. You could super glue it if you wanted to seal it again.
@twoogacom
Жыл бұрын
Is it a similar method for the new *giant* £60 pieces?
@hasbook7156
Жыл бұрын
I honestly haven’t tried those. They may be easier as they are held together with screws.
@twoogacom
Жыл бұрын
@@hasbook7156 Ah, you might be right there.. Perhaps with a long thin screwdriver..
@AidanMelvin-kr7ir
Ай бұрын
Can you put it back in the case
@hasbook7156
Ай бұрын
If you’re asking, yes you can.
@Kay-ig
Жыл бұрын
can you remove them off the stand
@hasbook7156
Жыл бұрын
You can, but it can be tricky. Sometimes they pop off, other times you have to use a sharp knife to slice under it. Someone suggested adhesive remover but I haven't tried that.
@youngjaxso
Жыл бұрын
I just stepped on mine now I don’t have my cases anymore 🤦🏾♂️
@BbuyTheStars
Жыл бұрын
i was too impatient so the little small acrylic part broke off 😂 now i can’t open it 💔
@hasbook7156
Жыл бұрын
You should still be able to open it. Squeeze just above the base to start popping the glued bottom. You can use a flat screwdriver to pry it open
@BbuyTheStars
Жыл бұрын
@@hasbook7156 so should i squeeze the black base or the acrylic part by the end??
@hasbook7156
Жыл бұрын
@@BbuyTheStars squeeze the acrylic right above the black base. You should hear a popping sound of the glue Seperating. Just do it gently and go around all 4 sides.
@hasbook7156
Жыл бұрын
Friend me on Facebook and I can send another video if needed
@BbuyTheStars
Жыл бұрын
@@hasbook7156 unfortunately i don’t have facebook :( sorry! but i will try and follow the method you just gave me- i appreciate it so much, and i’ll keep you updated!
@Daniel_B_23
5 ай бұрын
Why would you wanna damage it?
@hasbook7156
5 ай бұрын
It’s to make customs. Funkos comic covers are not rare. Most are sitting on clearance in targets.
@Daniel_B_23
5 ай бұрын
@@hasbook7156 ok I collect the Disney posters and there still $60
@zombone3d719
3 ай бұрын
I feel like it ruins it just my opinion
@hasbook7156
3 ай бұрын
Well most people do them for customs. I began this when Funko hadn’t put out a lot of them.
Пікірлер: 52